[OpenWrt-Devel] [PATCH 1/3] swconfig: add SWITCH_TYPE_LINK and support sending link info to user space
Rafał Miłecki
zajec5 at gmail.com
Wed Dec 16 12:19:01 EST 2015
So far we were sending link data as a string. It got some drawbacks:
1) Didn't allow writing clean user space apps reading link state. It was
needed to do some screen scraping.
2) Forced whole PORT_LINK communication to be string based. Adding
support for *setting* port link required passing string and parting
it in the kernel space.
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
.../linux/generic/files/drivers/net/phy/swconfig.c | 46 ++++++++++++++++++++++
target/linux/generic/files/include/linux/switch.h | 2 +
.../generic/files/include/uapi/linux/switch.h | 16 ++++++++
3 files changed, 64 insertions(+)
diff --git a/target/linux/generic/files/drivers/net/phy/swconfig.c b/target/linux/generic/files/drivers/net/phy/swconfig.c
index 6bb3be1..731bdcb 100644
--- a/target/linux/generic/files/drivers/net/phy/swconfig.c
+++ b/target/linux/generic/files/drivers/net/phy/swconfig.c
@@ -771,6 +771,43 @@ done:
}
static int
+swconfig_send_link(struct sk_buff *msg, struct genl_info *info, int attr,
+ const struct switch_port_link *link)
+{
+ struct nlattr *p = NULL;
+ int err = 0;
+
+ p = nla_nest_start(msg, attr);
+ if (nla_put_u32(msg, SWITCH_LINK_LINK, link->link))
+ goto nla_put_failure;
+ if (nla_put_u32(msg, SWITCH_LINK_DUPLEX, link->duplex))
+ goto nla_put_failure;
+ if (nla_put_u32(msg, SWITCH_LINK_ANEG, link->aneg))
+ goto nla_put_failure;
+ if (nla_put_u32(msg, SWITCH_LINK_TX_FLOW, link->tx_flow))
+ goto nla_put_failure;
+ if (nla_put_u32(msg, SWITCH_LINK_RX_FLOW, link->rx_flow))
+ goto nla_put_failure;
+ if (nla_put_u32(msg, SWITCH_LINK_SPEED, link->speed))
+ goto nla_put_failure;
+ if (link->eee & ADVERTISED_100baseT_Full) {
+ if (nla_put_flag(msg, SWITCH_LINK_FLAG_ADVERTISED_100BASET_FULL))
+ goto nla_put_failure;
+ }
+ if (link->eee & ADVERTISED_1000baseT_Full) {
+ if (nla_put_flag(msg, SWITCH_LINK_FLAG_ADVERTISED_1000BASET_FULL))
+ goto nla_put_failure;
+ }
+ nla_nest_end(msg, p);
+
+ return err;
+
+nla_put_failure:
+ nla_nest_cancel(msg, p);
+ return -1;
+}
+
+static int
swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
{
struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
@@ -794,6 +831,9 @@ swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
val.value.ports = dev->portbuf;
memset(dev->portbuf, 0,
sizeof(struct switch_port) * dev->ports);
+ } else if (attr->type == SWITCH_TYPE_LINK) {
+ val.value.link = &dev->linkbuf;
+ memset(&dev->linkbuf, 0, sizeof(struct switch_port_link));
}
err = attr->get(dev, attr, &val);
@@ -824,6 +864,12 @@ swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
if (err < 0)
goto nla_put_failure;
break;
+ case SWITCH_TYPE_LINK:
+ err = swconfig_send_link(msg, info,
+ SWITCH_ATTR_OP_VALUE_LINK, val.value.link);
+ if (err < 0)
+ goto nla_put_failure;
+ break;
default:
pr_debug("invalid type in attribute\n");
err = -EINVAL;
diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h
index 4291364..eac35f9 100644
--- a/target/linux/generic/files/include/linux/switch.h
+++ b/target/linux/generic/files/include/linux/switch.h
@@ -122,6 +122,7 @@ struct switch_dev {
struct mutex sw_mutex;
struct switch_port *portbuf;
struct switch_portmap *portmap;
+ struct switch_port_link linkbuf;
char buf[128];
@@ -148,6 +149,7 @@ struct switch_val {
const char *s;
u32 i;
struct switch_port *ports;
+ struct switch_port_link *link;
} value;
};
diff --git a/target/linux/generic/files/include/uapi/linux/switch.h b/target/linux/generic/files/include/uapi/linux/switch.h
index a59b239..b599943 100644
--- a/target/linux/generic/files/include/uapi/linux/switch.h
+++ b/target/linux/generic/files/include/uapi/linux/switch.h
@@ -50,6 +50,7 @@ enum {
SWITCH_ATTR_OP_VALUE_INT,
SWITCH_ATTR_OP_VALUE_STR,
SWITCH_ATTR_OP_VALUE_PORTS,
+ SWITCH_ATTR_OP_VALUE_LINK,
SWITCH_ATTR_OP_DESCRIPTION,
/* port lists */
SWITCH_ATTR_PORT,
@@ -86,6 +87,7 @@ enum switch_val_type {
SWITCH_TYPE_INT,
SWITCH_TYPE_STRING,
SWITCH_TYPE_PORTS,
+ SWITCH_TYPE_LINK,
SWITCH_TYPE_NOVAL,
};
@@ -97,6 +99,20 @@ enum {
SWITCH_PORT_ATTR_MAX
};
+/* link nested attributes */
+enum {
+ SWITCH_LINK_UNSPEC,
+ SWITCH_LINK_LINK,
+ SWITCH_LINK_DUPLEX,
+ SWITCH_LINK_ANEG,
+ SWITCH_LINK_TX_FLOW,
+ SWITCH_LINK_RX_FLOW,
+ SWITCH_LINK_SPEED,
+ SWITCH_LINK_FLAG_ADVERTISED_100BASET_FULL,
+ SWITCH_LINK_FLAG_ADVERTISED_1000BASET_FULL,
+ SWITCH_LINK_ATTR_MAX,
+};
+
#define SWITCH_ATTR_DEFAULTS_OFFSET 0x1000
--
1.8.4.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list