[OpenWrt-Devel] [PATCH 1/7] ar71xx: Kernel board definition for PowerCloud CAP324
openwrt at daniel.thecshore.com
openwrt at daniel.thecshore.com
Wed Dec 16 09:24:21 EST 2015
From: Daniel Dickinson <openwrt at daniel.thecshore.com>
Kernel part of support for PowerCloud CAP324 Cloud AP.
The CAP324 Cloud AP was a device sold by PowerCloud Systems as hardware for
the CloudCommand service for 'cloud' based managment of large numbers
access points.
The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port. It can be powered via PoE
or a power adaptor.
Signed-off-by: Daniel Dickinson <openwrt at daniel.thecshore.com>
---
target/linux/ar71xx/config-4.1 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 ++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../ar71xx/files/arch/mips/ath79/mach-cap324.c | 133 +++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/mikrotik/config-default | 1 +
target/linux/ar71xx/nand/config-default | 1 +
7 files changed, 148 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 0e8b4a4..dd1d97a 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_BSB=y
+CONFIG_ATH79_MACH_CAP324=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 2b62d89..3433c98 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -903,6 +903,16 @@ config ATH79_MACH_RW2458N
select ATH79_DEV_M25P80
select ATH79_DEV_USB
+config ATH79_MACH_CAP324
+ bool "PowerCloud CAP324 support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_CAP4200AG
bool "Senao CAP4200AG support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index f9c5b8f..cd9f1c0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
+obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c
new file mode 100644
index 0000000..2a6aed5
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c
@@ -0,0 +1,133 @@
+/*
+ * PowerCloud Systems CAP324 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2012-2013 PowerCloud Systems
+ * Copyright (C) 2015 Daniel Dickinson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define CAP324_GPIO_LED_POWER_GREEN 12
+#define CAP324_GPIO_LED_POWER_AMBER 13
+#define CAP324_GPIO_LED_LAN_GREEN 14
+#define CAP324_GPIO_LED_LAN_AMBER 15
+#define CAP324_GPIO_LED_WLAN_GREEN 18
+#define CAP324_GPIO_LED_WLAN_AMBER 19
+
+#define CAP324_GPIO_BTN_RESET 17
+
+#define CAP324_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CAP324_KEYS_DEBOUNCE_INTERVAL (3 * CAP324_KEYS_POLL_INTERVAL)
+
+#define CAP324_MAC_OFFSET 0
+#define CAP324_WMAC_CALDATA_OFFSET 0x1000
+#define CAP324_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led cap324_leds_gpio[] __initdata = {
+ {
+ .name = "pcs:green:power",
+ .gpio = CAP324_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "pcs:amber:power",
+ .gpio = CAP324_GPIO_LED_POWER_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "pcs:green:lan",
+ .gpio = CAP324_GPIO_LED_LAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "pcs:amber:lan",
+ .gpio = CAP324_GPIO_LED_LAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "pcs:green:wlan",
+ .gpio = CAP324_GPIO_LED_WLAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "pcs:amber:wlan",
+ .gpio = CAP324_GPIO_LED_WLAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cap324_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CAP324_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CAP324_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init cap324_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 mac[6];
+
+ ath79_gpio_output_select(CAP324_GPIO_LED_LAN_GREEN,
+ AR934X_GPIO_OUT_GPIO);
+ ath79_gpio_output_select(CAP324_GPIO_LED_LAN_AMBER,
+ AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cap324_leds_gpio),
+ cap324_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CAP324_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cap324_gpio_keys),
+ cap324_gpio_keys);
+
+ ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -1);
+ ath79_wmac_disable_2ghz();
+ ath79_register_wmac(art + CAP324_WMAC_CALDATA_OFFSET, mac);
+
+ ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -2);
+ ap91_pci_init(art + CAP324_PCIE_CALDATA_OFFSET, mac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + CAP324_MAC_OFFSET, -2);
+
+ /* GMAC0 is connected to an external PHY */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_CAP324, "CAP324", "PowerCloud CAP324",
+ cap324_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 2ea772d..738adb3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -42,6 +42,7 @@ enum ath79_mach_type {
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
+ ATH79_MACH_CAP324, /* PowerCloud CAP324 */
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index de91e4b..c46529c 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -15,6 +15,7 @@
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set
+# CONFIG_ATH79_MACH_CAP324 is not set
# CONFIG_ATH79_MACH_CAP4200AG is not set
# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
# CONFIG_ATH79_MACH_CPE510 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 05f52af..0368ffd 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -13,6 +13,7 @@
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
+# CONFIG_ATH79_MACH_CAP324 is not set
# CONFIG_ATH79_MACH_CAP4200AG is not set
# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
# CONFIG_ATH79_MACH_DB120 is not set
--
2.4.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list