[OpenWrt-Devel] [PATCH v4 1/2] Add ubnt_hsr platform flag and enable for UniFi Outdoor Plus

[Stefan Rompf]

Hi Tim,

> The auto-built image of 9 December 2015 for this device results in a
> bricked state. TFTP recovery with a stock recovery firmware from
> Ubiquity does not allow the device to boot either.

try flashing the chaos calmer factory image with TFTP
(openwrt-15.05-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs-factory.bin)

This has allowed me to recover a bricked Outdoor Plus. Flashing the Ubiquiti 
firmware via TFTP didn't work for me either.

> but if anyone wants this device as a donation to get it
> supported by OpenWRT, please let me know.

Well on one hand I'd be interested because the access point I had is mounted 
onsite now and therefore not available for hacking anymore.

On the other hand, I got the impression that mine and Kyrills patches were not 
too welcome, so I'm a bit hesitant to invest more time.

So good luck with unbricking, may be the device gets usable for your again!

Stefan
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel