[OpenWrt-Devel] [PATCH] ar71xx: add support for TRENDnet TEW-823DRU
Cezary Jackiewicz
cezary.jackiewicz at gmail.com
Sat Dec 12 02:53:09 EST 2015
Add support for TRENDnet TEW-823DRU:
- cpu: QCA9558 @720MHz
- flash: 16MB
- ram: 256MB
- 4+1 RJ45 100/1000Mbps
- wifi: QCA9558 (bgn) and QCA9880-BR4A (ac)
- 1x USB 2.0
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz at gmail.com>
---
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index d4f226e..ed2aeae 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -389,6 +389,10 @@ tew-732br)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
;;
+tew-823dru)
+ ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
+ ;;
+
tl-mr11u | \
tl-mr3020 | \
tl-mr3040 | \
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 11c4341..bfc898c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -43,6 +43,7 @@ ap147-010)
ap136-020 |\
ap135-020 |\
+tew-823dru |\
tl-wr1043nd-v2 |\
wzr-450hp2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0e1df10..fd57c55 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -255,7 +255,8 @@ get_status_led() {
status_led="trendnet:blue:wps"
;;
tew-712br|\
- tew-732br)
+ tew-732br|\
+ tew-823dru)
status_led="trendnet:green:power"
;;
tl-mr3020)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 54e6166..5af7adf 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -746,6 +746,9 @@ ar71xx_board_detect() {
*TEW-732BR)
name="tew-732br"
;;
+ *TEW-823DRU)
+ name="tew-823dru"
+ ;;
*"TL-WR1041N v2")
name="tl-wr1041n-v2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
index 4da611a..35a2fc9 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
+++ b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
@@ -23,7 +23,7 @@ do_patch_ath10k_firmware() {
# some boards have bogus mac in otp, patch the default mac in the firmware
case $(ar71xx_board_name) in
- dgl-5500-a1)
+ dgl-5500-a1 | tew-823dru)
local mac
mac=$(mtd_get_mac_ascii nvram wlan1_mac)
@@ -42,7 +42,7 @@ do_patch_ath10k_firmware() {
check_patch_ath10k_firmware() {
case $(ar71xx_board_name) in
- dgl-5500-a1)
+ dgl-5500-a1 | tew-823dru)
do_patch_ath10k_firmware
;;
esac
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index bb64ef8..7e564b4 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -231,6 +231,7 @@ platform_check_image() {
tew-632brp | \
tew-712br | \
tew-732br | \
+ tew-823dru | \
wrt400n | \
airgateway | \
airgatewaypro | \
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 0e8b4a4..15754d9 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -122,6 +122,7 @@ CONFIG_ATH79_MACH_TEW_632BRP=y
CONFIG_ATH79_MACH_TEW_673GRU=y
CONFIG_ATH79_MACH_TEW_712BR=y
CONFIG_ATH79_MACH_TEW_732BR=y
+CONFIG_ATH79_MACH_TEW_823DRU=y
CONFIG_ATH79_MACH_TL_MR11U=y
CONFIG_ATH79_MACH_TL_MR13U=y
CONFIG_ATH79_MACH_TL_MR3020=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 2b62d89..d619b3c 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1279,6 +1279,16 @@ config ATH79_MACH_TEW_732BR
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_TEW_823DRU
+ bool "TRENDnet TEW-823DRU support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_UBNT
bool "Ubiquiti AR71xx based boards support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index f9c5b8f..9f67bd8 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -129,6 +129,7 @@ obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o
+obj-$(CONFIG_ATH79_MACH_TEW_823DRU) += mach-tew-823dru.o
obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o
obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c
new file mode 100644
index 0000000..cf863ac
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c
@@ -0,0 +1,181 @@
+/*
+ * TRENDnet TEW-823DRU board support
+ *
+ * Copyright (C) 2015 Cezary Jackiewicz <cezary.jackiewicz at gmail.com>
+ * Copyright (C) 2014 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2014 Imre Kaloz <kaloz at openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TEW_823DRU_GPIO_LED_POWER_ORANGE 14
+#define TEW_823DRU_GPIO_LED_POWER_GREEN 19
+#define TEW_823DRU_GPIO_LED_PLANET_GREEN 22
+#define TEW_823DRU_GPIO_LED_PLANET_ORANGE 23
+
+#define TEW_823DRU_GPIO_BTN_WPS 16
+#define TEW_823DRU_GPIO_BTN_RESET 17
+
+#define TEW_823DRU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_823DRU_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TEW_823DRU_KEYS_POLL_INTERVAL)
+
+#define TEW_823DRU_WMAC_CALDATA_OFFSET 0x1000
+
+#define TEW_823DRU_LAN_MAC_OFFSET 0x04
+#define TEW_823DRU_WAN_MAC_OFFSET 0x18
+
+static struct gpio_led tew_823dru_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:green:power",
+ .gpio = TEW_823DRU_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "trendnet:orange:power",
+ .gpio = TEW_823DRU_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ },
+ {
+ .name = "trendnet:green:planet",
+ .gpio = TEW_823DRU_GPIO_LED_PLANET_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "trendnet:orange:planet",
+ .gpio = TEW_823DRU_GPIO_LED_PLANET_ORANGE,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tew_823dru_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_823DRU_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_823DRU_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
+static struct ar8327_pad_cfg tew_823dru_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
+static struct ar8327_pad_cfg tew_823dru_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data tew_823dru_ar8327_data = {
+ .pad0_cfg = &tew_823dru_ar8327_pad0_cfg,
+ .pad6_cfg = &tew_823dru_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info tew_823dru_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &tew_823dru_ar8327_data,
+ },
+};
+
+static void __init tew_823dru_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 lan_mac[ETH_ALEN];
+ u8 wan_mac[ETH_ALEN];
+
+ ath79_parse_ascii_mac(mac + TEW_823DRU_LAN_MAC_OFFSET, lan_mac);
+ ath79_parse_ascii_mac(mac + TEW_823DRU_WAN_MAC_OFFSET, wan_mac);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_823dru_leds_gpio),
+ tew_823dru_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TEW_823DRU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_823dru_gpio_keys),
+ tew_823dru_gpio_keys);
+
+ ath79_register_wmac(art + TEW_823DRU_WMAC_CALDATA_OFFSET, lan_mac);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
+
+
+ mdiobus_register_board_info(tew_823dru_mdio0_info,
+ ARRAY_SIZE(tew_823dru_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_823DRU, "TEW-823DRU", "TRENDnet TEW-823DRU",
+ tew_823dru_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 2ea772d..fc3eeaf 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -142,6 +142,7 @@ enum ath79_mach_type {
ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
+ ATH79_MACH_TEW_823DRU, /* TRENDnet TEW-823DRU */
ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/
ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
diff --git a/target/linux/ar71xx/generic/profiles/trendnet.mk b/target/linux/ar71xx/generic/profiles/trendnet.mk
index 42d05b6..6102e04 100644
--- a/target/linux/ar71xx/generic/profiles/trendnet.mk
+++ b/target/linux/ar71xx/generic/profiles/trendnet.mk
@@ -60,3 +60,15 @@ define Profile/TEW732BR/Description
endef
$(eval $(call Profile,TEW732BR))
+
+
+define Profile/TEW823DRU
+ NAME:=TRENDNet TEW-823DRU
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-ath10k
+endef
+
+define Profile/TEW823DRU/Description
+ Package set optimized for the TRENDNet TEW-823DRU.
+endef
+
+$(eval $(call Profile,TEW823DRU))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index e197ed3..10de223 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1520,6 +1520,7 @@ wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmwar
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k at 0x1a0000(firmware),2048k(language),3072k(traffic_meter)
+tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k at 0x6c0000(firmware),256k(caldata_backup),-(reserved)
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k at 0x50000(firmware)
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
@@ -2324,6 +2325,7 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
+$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
--
Pozdrawiam,
Cezary Jackiewicz
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list