[OpenWrt-Devel] [PATCH v5] Add support for Ubiquiti EdgeRouter X (UBNT-ERX)

[John Crispin]

On 12/12/2015 07:50, Nikolay Martynov wrote:
> Hi, John.
> 
>>
>> as for the led support, you need to add an extra hook function so that
>> swconfig can read the per port traffic counters. it can then make gpio
>> leds flash based on those values.
> 
>   Just to make sure we are on the same page: the problem is that this
> router doesn't have gpio-driven leds. Only leds it has are connected
> directly to switch and those are not exposed as gpios.
>   Is SWCONFIG_LEDS the thing that designed to help is this case? Or is
> it for the case when we have leds on gpios and switch without directly
> connected leds?

ah ok, i though the automagic leds dont work and you have gpio leds.
some ODMs do that for unknown reasons. in those cases the you need the
SWCONFIG_LEDS. do they just stay silent for you now ?







> 
>>>   I have other requested changes sitting it my git, so if lack of leds
>>> support is fine I'll resubmit.
>>>
>>
>> ok, go for it ... leds are nice but not a blocker.
> Thanks!
> 
>>
>> on a related matter .. does this unit have a locked down bootloader ?
> No, as far as I can see it does not. It has uboot and they provide code for it.
> 
> Thanks!
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel