[OpenWrt-Devel] [PATCH v6 0/6] add Cisco MR18 support

[John Crispin]

Hi,

i merges 1-4 of this series. 4/6 seems to have a lot of comments that
were never addressed. please resend 5/6 and 6/6 with the comments fixed

	John

On 05/12/2015 23:48, Christian Lamparter wrote:
> This series adds support for Cisco Meraki's MR18 router [0].
> It features:
> CPU: Atheros/Qualcomm QCA9557-AT4A at 720MHz
> RAM: 128 MiB DDR2
> NAND Flash: Hynix NAND 128MiB 3,3V 8-bit
> Wireless: SoC AR9550 + 2x Atheros AR9582-AR1A (one 5Ghz, other 2.4Ghz/5Ghz)
> Ethernet: 1x Gigabit AR8035-A, 802.3af PoE capable
> 
> For anyone interested, a working image [and information
> about how to flash the locked device] has been posted on
> the forum [1]. Pictures and bootlogs can be found in the
> wiki [2] too.
> 
> [0] <https://meraki.cisco.com/products/wireless/mr18>
> [1] <https://forum.openwrt.org/viewtopic.php?id=59248>
> [2] <http://wiki.openwrt.org/toh/meraki/mr18>
> 
> v5 -> v6: (John's comments)
>  - made separate patch for "base-files: use max_brightness to set LED"
>  - made separate patch for "scan nand ubi partition for ath9k eeprom files" 
>  - moved "rx/rvd delay code" into mach-mr18.c 
>  - moved "serdes calibration code" into mach-mr18.c
> 
> Chris R Blake (5):
>   base-files: use max_brightness to set LED
>   ar71xx: add rx/tx delay definitons for qca955x's MAC
>   ar71xx: add LED driver NU801
>   ar71xx: scan nand ubi partition for ath9k eeprom files
>   ar71xx: add support for Cisco's MR18
> 
> Thomas Hebb (1):
>   firmware-utils mkmerakifw: firmware generator for MR18
> 
>  package/base-files/files/etc/init.d/led            |   2 +-
>  package/base-files/files/lib/functions/system.sh   |  17 +
>  target/linux/ar71xx/base-files/etc/board.d/01_leds |   4 +
>  .../linux/ar71xx/base-files/etc/board.d/02_network |   1 +
>  target/linux/ar71xx/base-files/etc/diag.sh         |   3 +
>  .../etc/hotplug.d/firmware/10-ath9k-eeprom         |  38 +-
>  target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
>  .../base-files/lib/preinit/05_set_iface_mac_ar71xx |   4 +
>  .../ar71xx/base-files/lib/upgrade/merakinand.sh    | 137 +++++++
>  .../ar71xx/base-files/lib/upgrade/platform.sh      |   7 +
>  target/linux/ar71xx/config-4.1                     |   1 +
>  .../linux/ar71xx/files/arch/mips/ath79/mach-mr18.c | 297 ++++++++++++++++
>  .../linux/ar71xx/files/drivers/leds/leds-nu801.c   | 396 +++++++++++++++++++++
>  .../linux/ar71xx/files/include/linux/leds-nu801.h  |  38 ++
>  target/linux/ar71xx/image/Makefile                 |  34 ++
>  target/linux/ar71xx/modules.mk                     |  16 +
>  target/linux/ar71xx/nand/config-default            |   1 +
>  target/linux/ar71xx/nand/profiles/meraki.mk        |  17 +
>  ...PS-ath79-add-qca955x-mac-tx-rx-delay-defs.patch |  14 +
>  .../817-MIPS-ath79-add-meraki-mr18-support.patch   |  41 +++
>  .../818-MIPS-ath79-add-nu801-led-driver.patch      |  26 ++
>  tools/firmware-utils/Makefile                      |   1 +
>  tools/firmware-utils/src/mkmerakifw.c              | 263 ++++++++++++++
>  23 files changed, 1359 insertions(+), 2 deletions(-)
>  create mode 100644 target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
>  create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c
>  create mode 100644 target/linux/ar71xx/files/drivers/leds/leds-nu801.c
>  create mode 100644 target/linux/ar71xx/files/include/linux/leds-nu801.h
>  create mode 100644 target/linux/ar71xx/nand/profiles/meraki.mk
>  create mode 100644 target/linux/ar71xx/patches-4.1/742-MIPS-ath79-add-qca955x-mac-tx-rx-delay-defs.patch
>  create mode 100644 target/linux/ar71xx/patches-4.1/817-MIPS-ath79-add-meraki-mr18-support.patch
>  create mode 100644 target/linux/ar71xx/patches-4.1/818-MIPS-ath79-add-nu801-led-driver.patch
>  create mode 100644 tools/firmware-utils/src/mkmerakifw.c
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel