[OpenWrt-Devel] [PATCH 0/9] Add CPS support to mt7621 and add ubnt-erx support to work with it
John Crispin
blogic at openwrt.org
Fri Dec 11 01:40:00 EST 2015
oh nice, i'll fold these today. i was about to send mt7621 support
upstream but decided to wait until you sent your CPS patches.
On 11/12/2015 05:01, Nikolay Martynov wrote:
> That patch series adds support for Ubiquiti ERX router.
> This router is based on mt7621 and it looks like there are some issues with this SoC
> in 4.3. This patchset also addresses them by enabling CPS support for multiprocessing.
>
> Nikolay Martynov (9):
> ramips: add support for Ubiquiti EdgeRouter X (UBNT-ERX)
> ramips: mt7621: use symbolic names of gic interrupt settings
> ramips: backport batch fixing illegal instruction when booting
> secodnary CPUs in CPS mode
> ramips: backport series of patches that ensure GCRs of other CPUs are
> accessed properly
> ramips: fold gic patch into mt7621 support patch
> ramips: Fix CM_GCR_CPC_BASE_CPCBASE_{MSK,SHF} values
> ramips: enable CPS for mt7621
> ramips: irq handlers do not get irq in 4.3 kernel, update patches
> ramips: use gic timer as clocksource for mt7621
>
> package/system/procd/files/nand.sh | 4 +
> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/lib/ramips.sh | 5 +-
> .../ramips/base-files/lib/upgrade/platform.sh | 24 ++
> target/linux/ramips/base-files/lib/upgrade/ubnt.sh | 71 ++++
> target/linux/ramips/dts/DIR-860L-B1.dts | 2 +-
> target/linux/ramips/dts/FIREWRT.dts | 2 +-
> target/linux/ramips/dts/MT7621.dts | 24 +-
> target/linux/ramips/dts/PBR-M1.dts | 2 +-
> target/linux/ramips/dts/RE6500.dts | 2 +-
> target/linux/ramips/dts/SAP-G3200U3.dts | 2 +-
> target/linux/ramips/dts/UBNT-ERX.dts | 119 ++++++
> target/linux/ramips/dts/WF-2881.dts | 2 +-
> target/linux/ramips/dts/WSR-1166.dts | 2 +-
> target/linux/ramips/dts/WSR-600.dts | 2 +-
> target/linux/ramips/dts/ZBT-WG2626.dts | 2 +-
> target/linux/ramips/dts/mt7621.dtsi | 64 ++--
> target/linux/ramips/image/Makefile | 61 ++-
> target/linux/ramips/mt7621/config-4.3 | 12 +-
> target/linux/ramips/mt7621/profiles/ubnt.mk | 17 +
> .../0001-arch-mips-ralink-add-mt7621-support.patch | 409 ++-------------------
> ...IPS-ralink-add-gpio-driver-for-ralink-SoC.patch | 17 +-
> ...28-GPIO-ralink-add-mt7621-gpio-controller.patch | 16 +-
> target/linux/ramips/patches-4.3/0053-gic.patch | 305 ---------------
> ...55-MIPS-CPS-drop-.set-mips64r2-directives.patch | 53 +++
> ...-cm-intoruce-core-other-locking-functions.patch | 140 +++++++
> .../0057-cm-use-core-other-locking-function.patch | 80 ++++
> ...nsure-core-other-GCR-reflect-correct-core.patch | 49 +++
> .../patches-4.3/0059-correct-CPC_BASE_MASK.patch | 13 +
> .../patches-4.3/0901-spansion_nand_id_fix.patch | 43 +++
> .../patches-4.3/0902-mt7621-use-gic-timer.patch | 83 +++++
> 31 files changed, 872 insertions(+), 756 deletions(-)
> create mode 100644 target/linux/ramips/base-files/lib/upgrade/ubnt.sh
> create mode 100644 target/linux/ramips/dts/UBNT-ERX.dts
> create mode 100644 target/linux/ramips/mt7621/profiles/ubnt.mk
> delete mode 100644 target/linux/ramips/patches-4.3/0053-gic.patch
> create mode 100644 target/linux/ramips/patches-4.3/0055-MIPS-CPS-drop-.set-mips64r2-directives.patch
> create mode 100644 target/linux/ramips/patches-4.3/0056-cm-intoruce-core-other-locking-functions.patch
> create mode 100644 target/linux/ramips/patches-4.3/0057-cm-use-core-other-locking-function.patch
> create mode 100644 target/linux/ramips/patches-4.3/0058-backport-ensure-core-other-GCR-reflect-correct-core.patch
> create mode 100644 target/linux/ramips/patches-4.3/0059-correct-CPC_BASE_MASK.patch
> create mode 100644 target/linux/ramips/patches-4.3/0901-spansion_nand_id_fix.patch
> create mode 100644 target/linux/ramips/patches-4.3/0902-mt7621-use-gic-timer.patch
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list