[OpenWrt-Devel] Board detection for Lamobo R1 fails

[Vasco Steinmetz]

A quick test seems to work, the switch is added and during boot the system 
happily reports the board.

Detected lamobo-r1 // Lamobo Banana Pi R1


root at OpenWrt:/etc/board.d# cat /etc/board.json
{
        "model": {
                "id": "lamobo-r1",
                "name": "Lamobo Banana Pi R1"
        },
        "switch": {
...


VG,
Vasco


Am Donnerstag 10 Dezember 2015, 09:36:38 schrieb Jo-Philipp Wich:
> Hi Vasco,
> 
> thats certainly possible, I merely did a logical translation of the code.
> 
> Can you please check that after changing "Lamobo R1" in the case switch
> to "Lamobo Banana Pi R1" the defaults are working properly?
> 
> You can test with the following command:
> 
>   rm -f /etc/board.json /etc/config/network
>   board_detect
> 
> 
> Regards,
> Jo-Philipp
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel