[OpenWrt-Devel] [PATCH] [ipq806x] Add initial support for TP-Link Archer C2600
Josh Bendavid
Josh.Bendavid at cern.ch
Sun Dec 6 09:20:19 EST 2015
From: Josh Bendavid <joshbendavid at gmail.com>
Add initial support for Archer C2600 to Makefiles and profiles. This is
sufficient to build a working factory image. Sysupgrade image is not
implemented yet. Currently wired network is working, but
LED's/buttons/wireless are not. Updated to create a separate dts file for
c2600, which is currently identical to the ap148 aside that the
sata-related sections have been removed.
Signed-off-by: Josh Bendavid <joshbendavid at gmail.com>
---
diff --git a/include/image.mk b/include/image.mk
index fd5e3f4..fab3c8a 100644
--- a/include/image.mk
+++ b/include/image.mk
@@ -327,6 +327,17 @@ define Build/netgear-dni
mv $@.new $@
endef
+define Build/tplink-safe
+ $(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(TPLINK_BOARD_ID) -V OpenWrt.$(REVISION) \
+ -k $(word 1,$^) \
+ -r $(word 2,$^) \
+ -j \
+ $(if $(findstring sysupgrade,$1),-S) \
+ -o $@.new
+ mv $@.new $@
+endef
+
define Build/fit
$(TOPDIR)/scripts/mkits.sh \
-D $(DEVICE_NAME) -o $@.its -k $@ \
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network
b/target/linux/ipq806x/base-files/etc/board.d/02_network
index b054230..e000e3d 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -13,7 +13,8 @@ board=$(ipq806x_board_name)
case "$board" in
ap148 |\
-r7500)
+r7500 |\
+c2600)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6 at eth1" "5:wan" "0 at eth0"
;;
diff --git a/target/linux/ipq806x/base-files/lib/ipq806x.sh
b/target/linux/ipq806x/base-files/lib/ipq806x.sh
index 5b27bde..262183f 100644
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@@ -23,6 +23,9 @@ ipq806x_board_detect() {
*"R7500")
name="r7500"
;;
+ *"C2600")
+ name="c2600"
+ ;;
esac
[ -z "$name" ] && name="unknown"
diff --git a/target/linux/ipq806x/image/Makefile
b/target/linux/ipq806x/image/Makefile
index 14cf442..0445914 100644
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@@ -85,6 +85,18 @@ define Device/DniImage
endef
DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_BLOCK_SIZE DEVICE_PAGE_SIZE
+define Device/TpSafeImage
+ PROFILES += $$(DEVICE_NAME)
+ FILESYSTEMS := squashfs
+ KERNEL_SUFFIX := -uImage
+ KERNEL = kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ TPLINK_BOARD_ID :=
+ IMAGES := factory.bin
+ IMAGE/factory.bin := tplink-safe
+endef
+DEVICE_VARS += TPLINK_BOARD_ID
+
define Device/AP148
$(call Device/FitImage)
$(call Device/UbiFit)
@@ -103,6 +115,15 @@ define Device/AP148-legacy
BOARD_NAME := ap148
endef
+define Device/C2600
+ $(call Device/TpSafeImage)
+ DEVICE_DTS := qcom-ipq8064-c2600
+ BLOCKSIZE := 128KiB
+ PAGESIZE := 2048
+ BOARD_NAME := ap148
+ TPLINK_BOARD_ID := C2600
+endef
+
define Device/DB149
$(call Device/FitImage)
DEVICE_DTS := qcom-ipq8064-db149
@@ -121,6 +142,6 @@ define Device/R7500
BOARD_NAME := r7500
endef
-TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
+TARGET_DEVICES += AP148 AP148-legacy C2600 DB149 R7500
$(eval $(call BuildImage))
diff --git
a/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
index e69de29..e750b98 100644
---
a/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
+++
b/target/linux/ipq806x/patches-3.18/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
@@ -0,0 +1,246 @@
+diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+--- a/arch/arm/boot/dts/Makefile 2015-11-25 22:51:15.148899604 +0100
++++ b/arch/arm/boot/dts/Makefile 2015-12-06 14:33:31.092396982 +0100
+@@ -362,6 +362,7 @@
+ qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-db149.dtb \
+ qcom-ipq8064-r7500.dtb \
++ qcom-ipq8064-c2600.dtb \
+ qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-sony-xperia-honami.dtb
+diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 1970-01-01
01:00:00.000000000 +0100
++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 2015-12-06
14:20:05.152365670 +0100
+@@ -0,0 +1,231 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++/ {
++ model = "TP-Link Archer C2600";
++ compatible = "tplink,c2600", "qcom,ipq8064";
++
++ memory at 0 {
++ reg = <0x42000000 0x1e000000>;
++ device_type = "memory";
++ };
++
++ reserved-memory {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++ rsvd at 41200000 {
++ reg = <0x41200000 0x300000>;
++ no-map;
++ };
++ };
++
++ aliases {
++ serial0 = &uart4;
++ mdio-gpio0 = &mdio0;
++ };
++
++ chosen {
++ linux,stdout-path = "serial0:115200n8";
++ };
++
++ soc {
++ pinmux at 800000 {
++ i2c4_pins: i2c4_pinmux {
++ pins = "gpio12", "gpio13";
++ function = "gsbi4";
++ bias-disable;
++ };
++
++ spi_pins: spi_pins {
++ mux {
++ pins = "gpio18", "gpio19", "gpio21";
++ function = "gsbi5";
++ drive-strength = <10>;
++ bias-none;
++ };
++ };
++
++ nand_pins: nand_pins {
++ mux {
++ pins = "gpio34", "gpio35", "gpio36",
++ "gpio37", "gpio38", "gpio39",
++ "gpio40", "gpio41", "gpio42",
++ "gpio43", "gpio44", "gpio45",
++ "gpio46", "gpio47";
++ function = "nand";
++ drive-strength = <10>;
++ bias-disable;
++ };
++
++ pullups {
++ pins = "gpio39";
++ bias-pull-up;
++ };
++
++ hold {
++ pins = "gpio40", "gpio41", "gpio42",
++ "gpio43", "gpio44", "gpio45",
++ "gpio46", "gpio47";
++ bias-bus-hold;
++ };
++ };
++
++ mdio0_pins: mdio0_pins {
++ mux {
++ pins = "gpio0", "gpio1";
++ function = "gpio";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++
++ rgmii2_pins: rgmii2_pins {
++ mux {
++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
++ function = "rgmii2";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++ };
++
++ gsbi at 16300000 {
++ qcom,mode = <GSBI_PROT_I2C_UART>;
++ status = "ok";
++ serial at 16340000 {
++ status = "ok";
++ };
++ /*
++ * The i2c device on gsbi4 should not be enabled.
++ * On ipq806x designs gsbi4 i2c is meant for exclusive
++ * RPM usage. Turning this on in kernel manifests as
++ * i2c failure for the RPM.
++ */
++ };
++
++ gsbi5: gsbi at 1a200000 {
++ qcom,mode = <GSBI_PROT_SPI>;
++ status = "ok";
++
++ spi4: spi at 1a280000 {
++ status = "ok";
++ spi-max-frequency = <50000000>;
++
++ pinctrl-0 = <&spi_pins>;
++ pinctrl-names = "default";
++
++ cs-gpios = <&qcom_pinmux 20 0>;
++
++ flash: m25p80 at 0 {
++ compatible = "s25fl256s1";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ spi-max-frequency = <50000000>;
++ reg = <0>;
++
++ linux,part-probe = "qcom-smem";
++ };
++ };
++ };
++
++ phy at 100f8800 { /* USB3 port 1 HS phy */
++ status = "ok";
++ };
++
++ phy at 100f8830 { /* USB3 port 1 SS phy */
++ status = "ok";
++ };
++
++ phy at 110f8800 { /* USB3 port 0 HS phy */
++ status = "ok";
++ };
++
++ phy at 110f8830 { /* USB3 port 0 SS phy */
++ status = "ok";
++ };
++
++ usb30 at 0 {
++ status = "ok";
++ };
++
++ usb30 at 1 {
++ status = "ok";
++ };
++
++ pcie0: pci at 1b500000 {
++ status = "ok";
++ phy-tx0-term-offset = <7>;
++ };
++
++ pcie1: pci at 1b700000 {
++ status = "ok";
++ phy-tx0-term-offset = <7>;
++ };
++
++ nand at 1ac00000 {
++ status = "ok";
++
++ pinctrl-0 = <&nand_pins>;
++ pinctrl-names = "default";
++
++ nand-ecc-strength = <4>;
++ nand-bus-width = <8>;
++
++ linux,part-probe = "qcom-smem";
++ };
++
++ mdio0: mdio {
++ compatible = "virtual,mdio-gpio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++ pinctrl-0 = <&mdio0_pins>;
++ pinctrl-names = "default";
++
++ phy0: ethernet-phy at 0 {
++ device_type = "ethernet-phy";
++ reg = <0>;
++ qca,ar8327-initvals = <
++ 0x00004 0x7600000 /* PAD0_MODE */
++ 0x00008 0x1000000 /* PAD5_MODE */
++ 0x0000c 0x80 /* PAD6_MODE */
++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
++ 0x000e0 0xc74164de /* SGMII_CTRL */
++ 0x0007c 0x4e /* PORT0_STATUS */
++ 0x00094 0x4e /* PORT6_STATUS */
++ >;
++ };
++
++ phy4: ethernet-phy at 4 {
++ device_type = "ethernet-phy";
++ reg = <4>;
++ };
++ };
++
++ gmac1: ethernet at 37200000 {
++ status = "ok";
++ phy-mode = "rgmii";
++ phy-handle = <&phy4>;
++ qcom,id = <1>;
++
++ pinctrl-0 = <&rgmii2_pins>;
++ pinctrl-names = "default";
++ };
++
++ gmac2: ethernet at 37400000 {
++ status = "ok";
++ phy-mode = "sgmii";
++ qcom,id = <2>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++};
++
++&adm_dma {
++ status = "ok";
++};
diff --git
a/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
index e69de29..cd4341e 100644
---
a/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
+++
b/target/linux/ipq806x/patches-4.1/711-ARM-qcom-add-TP-Link-Archer-C2600-device-tree.patch
@@ -0,0 +1,246 @@
+diff -urN a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+--- a/arch/arm/boot/dts/Makefile 2015-11-25 22:51:15.148899604 +0100
++++ b/arch/arm/boot/dts/Makefile 2015-12-06 14:33:31.092396982 +0100
+@@ -453,6 +453,7 @@
+ qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-db149.dtb \
+ qcom-ipq8064-r7500.dtb \
++ qcom-ipq8064-c2600.dtb \
+ qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-sony-xperia-honami.dtb
+diff -urN a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+--- a/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 1970-01-01
01:00:00.000000000 +0100
++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts 2015-12-06
14:20:05.152365670 +0100
+@@ -0,0 +1,231 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++/ {
++ model = "TP-Link Archer C2600";
++ compatible = "tplink,c2600", "qcom,ipq8064";
++
++ memory at 0 {
++ reg = <0x42000000 0x1e000000>;
++ device_type = "memory";
++ };
++
++ reserved-memory {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++ rsvd at 41200000 {
++ reg = <0x41200000 0x300000>;
++ no-map;
++ };
++ };
++
++ aliases {
++ serial0 = &uart4;
++ mdio-gpio0 = &mdio0;
++ };
++
++ chosen {
++ linux,stdout-path = "serial0:115200n8";
++ };
++
++ soc {
++ pinmux at 800000 {
++ i2c4_pins: i2c4_pinmux {
++ pins = "gpio12", "gpio13";
++ function = "gsbi4";
++ bias-disable;
++ };
++
++ spi_pins: spi_pins {
++ mux {
++ pins = "gpio18", "gpio19", "gpio21";
++ function = "gsbi5";
++ drive-strength = <10>;
++ bias-none;
++ };
++ };
++
++ nand_pins: nand_pins {
++ mux {
++ pins = "gpio34", "gpio35", "gpio36",
++ "gpio37", "gpio38", "gpio39",
++ "gpio40", "gpio41", "gpio42",
++ "gpio43", "gpio44", "gpio45",
++ "gpio46", "gpio47";
++ function = "nand";
++ drive-strength = <10>;
++ bias-disable;
++ };
++
++ pullups {
++ pins = "gpio39";
++ bias-pull-up;
++ };
++
++ hold {
++ pins = "gpio40", "gpio41", "gpio42",
++ "gpio43", "gpio44", "gpio45",
++ "gpio46", "gpio47";
++ bias-bus-hold;
++ };
++ };
++
++ mdio0_pins: mdio0_pins {
++ mux {
++ pins = "gpio0", "gpio1";
++ function = "gpio";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++
++ rgmii2_pins: rgmii2_pins {
++ mux {
++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
++ function = "rgmii2";
++ drive-strength = <8>;
++ bias-disable;
++ };
++ };
++ };
++
++ gsbi at 16300000 {
++ qcom,mode = <GSBI_PROT_I2C_UART>;
++ status = "ok";
++ serial at 16340000 {
++ status = "ok";
++ };
++ /*
++ * The i2c device on gsbi4 should not be enabled.
++ * On ipq806x designs gsbi4 i2c is meant for exclusive
++ * RPM usage. Turning this on in kernel manifests as
++ * i2c failure for the RPM.
++ */
++ };
++
++ gsbi5: gsbi at 1a200000 {
++ qcom,mode = <GSBI_PROT_SPI>;
++ status = "ok";
++
++ spi4: spi at 1a280000 {
++ status = "ok";
++ spi-max-frequency = <50000000>;
++
++ pinctrl-0 = <&spi_pins>;
++ pinctrl-names = "default";
++
++ cs-gpios = <&qcom_pinmux 20 0>;
++
++ flash: m25p80 at 0 {
++ compatible = "s25fl256s1";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ spi-max-frequency = <50000000>;
++ reg = <0>;
++
++ linux,part-probe = "qcom-smem";
++ };
++ };
++ };
++
++ phy at 100f8800 { /* USB3 port 1 HS phy */
++ status = "ok";
++ };
++
++ phy at 100f8830 { /* USB3 port 1 SS phy */
++ status = "ok";
++ };
++
++ phy at 110f8800 { /* USB3 port 0 HS phy */
++ status = "ok";
++ };
++
++ phy at 110f8830 { /* USB3 port 0 SS phy */
++ status = "ok";
++ };
++
++ usb30 at 0 {
++ status = "ok";
++ };
++
++ usb30 at 1 {
++ status = "ok";
++ };
++
++ pcie0: pci at 1b500000 {
++ status = "ok";
++ phy-tx0-term-offset = <7>;
++ };
++
++ pcie1: pci at 1b700000 {
++ status = "ok";
++ phy-tx0-term-offset = <7>;
++ };
++
++ nand at 1ac00000 {
++ status = "ok";
++
++ pinctrl-0 = <&nand_pins>;
++ pinctrl-names = "default";
++
++ nand-ecc-strength = <4>;
++ nand-bus-width = <8>;
++
++ linux,part-probe = "qcom-smem";
++ };
++
++ mdio0: mdio {
++ compatible = "virtual,mdio-gpio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++ pinctrl-0 = <&mdio0_pins>;
++ pinctrl-names = "default";
++
++ phy0: ethernet-phy at 0 {
++ device_type = "ethernet-phy";
++ reg = <0>;
++ qca,ar8327-initvals = <
++ 0x00004 0x7600000 /* PAD0_MODE */
++ 0x00008 0x1000000 /* PAD5_MODE */
++ 0x0000c 0x80 /* PAD6_MODE */
++ 0x000e4 0xaa545 /* MAC_POWER_SEL */
++ 0x000e0 0xc74164de /* SGMII_CTRL */
++ 0x0007c 0x4e /* PORT0_STATUS */
++ 0x00094 0x4e /* PORT6_STATUS */
++ >;
++ };
++
++ phy4: ethernet-phy at 4 {
++ device_type = "ethernet-phy";
++ reg = <4>;
++ };
++ };
++
++ gmac1: ethernet at 37200000 {
++ status = "ok";
++ phy-mode = "rgmii";
++ phy-handle = <&phy4>;
++ qcom,id = <1>;
++
++ pinctrl-0 = <&rgmii2_pins>;
++ pinctrl-names = "default";
++ };
++
++ gmac2: ethernet at 37400000 {
++ status = "ok";
++ phy-mode = "sgmii";
++ qcom,id = <2>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++};
++
++&adm_dma {
++ status = "ok";
++};
diff --git a/target/linux/ipq806x/profiles/tplink.mk
b/target/linux/ipq806x/profiles/tplink.mk
index e69de29..d3f5a6c 100644
--- a/target/linux/ipq806x/profiles/tplink.mk
+++ b/target/linux/ipq806x/profiles/tplink.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2014 The Linux Foundation. All rights reserved.
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/C2600
+ NAME:=TP-Link Archer C2600
+ PACKAGES:= \
+ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
+ kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
+ kmod-ath10k ath10k-firmware-qca99x0 wpad-mini
+endef
+
+define Profile/C2600/Description
+ Package set for the TP-Link Archer C2600.
+endef
+$(eval $(call Profile,C2600))
On 5 December 2015 at 15:08, Jonas Gorski <jogo at openwrt.org> wrote:
> Hi,
>
> On Sat, Dec 5, 2015 at 5:13 AM, Josh Bendavid <Josh.Bendavid at cern.ch>
> wrote:
> > From: Josh Bendavid <joshbendavid at gmail.com>
> >
> > Add initial support for Archer C2600 to Makefiles and profiles. This is
> > sufficient to build a working factory image. Sysupgrade image is not
> > implemented yet. Currently wired network is working, but
> > LED's/buttons/wireless are not.
> >
> > Signed-off-by: Josh Bendavid <joshbendavid at gmail.com>
> > ---
> >
> > diff --git a/include/image.mk b/include/image.mk
> > index fd5e3f4..9ad2d43 100644
> > --- a/include/image.mk
> > +++ b/include/image.mk
> > @@ -327,6 +327,16 @@ define Build/netgear-dni
> > mv $@.new $@
> > endef
> >
> > +define Build/tplink-safe
> > + $(STAGING_DIR_HOST)/bin/tplink-safeloader \
> > + -B $(TPLINK_BOARD_ID) -V OpenWrt.$(REVISION) \
> > + -k $(word 1,$^) \
> > + -r $(word 2,$^) \
> > + -j \
> > + -o $@.new
> > + mv $@.new $@
> > +endef
> > +
> > define Build/fit
> > $(TOPDIR)/scripts/mkits.sh \
> > -D $(DEVICE_NAME) -o $@.its -k $@ \
> > diff --git a/target/linux/ipq806x/image/Makefile
> > b/target/linux/ipq806x/image/Makefile
> > index 14cf442..8e6a174 100644
> > --- a/target/linux/ipq806x/image/Makefile
> > +++ b/target/linux/ipq806x/image/Makefile
> > @@ -85,6 +85,18 @@ define Device/DniImage
> > endef
> > DEVICE_VARS += KERNEL_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID
> DEVICE_BLOCK_SIZE
> > DEVICE_PAGE_SIZE
> >
> > +define Device/TpSafeImage
> > + PROFILES += $$(DEVICE_NAME)
> > + FILESYSTEMS := squashfs
> > + KERNEL_SUFFIX := -uImage
> > + KERNEL = kernel-bin | append-dtb | uImage none
> > + KERNEL_NAME := zImage
> > + TPLINK_BOARD_ID :=
> > + IMAGES := factory.bin
> > + IMAGE/factory.bin := tplink-safe
> > +endef
> > +DEVICE_VARS += TPLINK_BOARD_ID
> > +
> > define Device/AP148
> > $(call Device/FitImage)
> > $(call Device/UbiFit)
> > @@ -103,6 +115,15 @@ define Device/AP148-legacy
> > BOARD_NAME := ap148
> > endef
> >
> > +define Device/C2600
> > + $(call Device/TpSafeImage)
> > + DEVICE_DTS := qcom-ipq8064-ap148
>
> The TP-Link doesn't have a eSATA port, so please create its own dts file
> for it.
>
>
> Jonas
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151206/30b8376e/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list