[OpenWrt-Devel] [PATCH v4] ramips: add support for MQmaker WiTi board

[John Crispin]

offtopic ... my 2 samples of this board just arrived :) i know what i
will be testing later on today

On 03/12/2015 12:13, Felix Fietkau wrote:
> On 2015-12-03 07:20, Sebastian Careba wrote:
>> The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 4th submission that fixes the naming scheme for Mqmaker WiTi board.
>> Patch v1 added initial support for MQmaker WiTi board. The device tree is based on PBR-M1.
>> Patch v2 changed the flash chip ID (w25q256 to gd25q128).
>> Patch v3 fixed the left-out entry for WiTi in 02_network.
>>
>> Signed-off-by: Sebastian Careba <nitroshift at yahoo.com>
>> ---
>>  .../patches-3.18/999-add_gd25q128_support.patch    |  13 ++
>>  .../linux/ramips/base-files/etc/board.d/02_network |   1 +
>>  target/linux/ramips/base-files/etc/diag.sh         |   1 +
>>  target/linux/ramips/base-files/lib/ramips.sh       |   3 +
>>  .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
>>  target/linux/ramips/dts/WITI.dts                   | 142 +++++++++++++++++++++
>>  target/linux/ramips/image/Makefile                 |   7 +-
>>  target/linux/ramips/mt7621/profiles/mqmaker.mk     |  20 +++
>>  8 files changed, 187 insertions(+), 1 deletion(-)
>>  create mode 100644 target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>>  create mode 100644 target/linux/ramips/dts/WITI.dts
>>  create mode 100644 target/linux/ramips/mt7621/profiles/mqmaker.mk
>>
>> diff --git a/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch b/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>> new file mode 100644
>> index 0000000..e9c380b
>> --- /dev/null
>> +++ b/target/linux/generic/patches-3.18/999-add_gd25q128_support.patch
>> @@ -0,0 +1,13 @@
>> Index: linux-3.18.23/drivers/mtd/devices/m25p80.c
>> ===================================================================
>> --- linux-3.18.23.orig/drivers/mtd/devices/m25p80.c
>> +++ linux-3.18.23/drivers/mtd/devices/m25p80.c
>> @@ -352,7 +352,7 @@ static const struct spi_device_id m25p_i
>>  	{"en25q64"},	{"en25qh128"},	{"en25qh256"},
>>  	{"f25l32pa"},
>>  	{"mr25h256"},	{"mr25h10"},
>> -	{"gd25q32"},	{"gd25q64"},
>> +	{"gd25q32"},	{"gd25q64"},	{"gd25q128"},
>>  	{"160s33b"},	{"320s33b"},	{"640s33b"},
>>  	{"mx25l2005a"},	{"mx25l4005a"},	{"mx25l8005"},	{"mx25l1606e"},
>>  	{"mx25l3205d"},	{"mx25l3255e"},	{"mx25l6405d"},	{"mx25l12805d"},
> Please drop this patch (see below).
> 
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/WITI.dts
>> @@ -0,0 +1,142 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7621.dtsi"
>> +
>> +/ {
>> +	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
>> +	model = "MQmaker WiTi";
>> +
>> +	memory at 0 {
>> +		device_type = "memory";
>> +		reg = <0x0 0x10000000>;
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "console=ttyS0,57600";
>> +	};
>> +
>> +	sdhci at 10130000 {
>> +		status = "okay";
>> +	};
>> +
>> +	palmbus at 1E000000 {
>> +		spi at b00 {
>> +			status = "okay";
>> +
>> +			m25p80 at 0 {
>> +				#address-cells = <1>;
>> +				#size-cells = <1>;
>> +				compatible = "gd25q128";
> Please use 'jedec,spi-nor' here, so you don't have to patch in the
> device id for this chip.
> 
> - Felix
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel