[OpenWrt-Devel] Issues with Intel Wifi 7260 AC
Carlos Ferreira
carlosmf.pt at gmail.com
Tue Dec 1 17:17:31 EST 2015
Thanks for the info.
I'm having this weird issue with OpenWRT. I guess more research is
required...
On 1 December 2015 at 03:11, camden lindsay <
camden.lindsay+openwrt at gmail.com> wrote:
> Here are basically all of my iwlwifi notes in dmesg, although I find
> it interesting that yours calls out the interrupt. must have to do
> with log level somewhere or something.
>
> Ah, i missed before that you eventually seem to get one to load,
> albeit with an error:
> [ 23.210567] firmware iwlwifi-7260-14.ucode: firmware_loading_store:
> map pages failed
>
> Sorry, not sure how to look further and don't know what that means.
> Not good enough with source code to figure it, either.
>
> c
>
>
>
> [dylan at zenbook src]$ dmesg | grep -e iwlwifi -e iwlmvm | grep -i -C 6
> firmware
> [ 0.000000] Linux version 4.0.4-2-iwlwifidebug (dylan at zenbook) (gcc
> version 5.1.0 (GCC) ) #1 SMP PREEMPT Mon Jun 15 00:00:56 PDT 2015
> [ 0.000000] Command line:
> BOOT_IMAGE=/boot/vmlinuz-linux-iwlwifidebug
> root=UUID=3aefb1c6-c861-44f2-bba0-f2b3275ca492 rw
> i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1
> i915.semaphores=1 "acpi_osi=!Windows 2012"
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-linux-iwlwifidebug
> root=UUID=3aefb1c6-c861-44f2-bba0-f2b3275ca492 rw
> i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1
> i915.semaphores=1 "acpi_osi=!Windows 2012"
> [ 3.717096] iwlwifi 0000:02:00.0: loaded firmware version
> 25.17.12.0 op_mode iwlmvm
> [ 3.749436] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band
> Wireless AC 7260, REV=0x144
> [ 3.749581] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
> [ 3.750029] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
> [ 11.965259] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>
> On Mon, Nov 30, 2015 at 4:05 PM, camden lindsay
> <camden.lindsay+openwrt at gmail.com> wrote:
> > I use an intel 7260 with few or no problems.
> > I'm wondering if this line has something to do with your crashing
> problems
> > '[ 23.187368] iwlwifi 0000:04:00.0: Direct firmware load for
> > iwlwifi-7260-17.ucode failed with error -2'
> >
> > I'll try to remember to look tonight at my dmesg to see what it looks
> like.
> >
> >
> >
> > On Mon, Nov 30, 2015 at 10:35 AM, Carlos Ferreira <carlosmf.pt at gmail.com>
> wrote:
> >> Does anyone had any issues with the Intel 7260 AC Wi-Fi Mini-PCI Express
> >> card?
> >>
> >> After selecting the proper iwlwifi modules with support for the 7260
> model,
> >> I'm plagued with this issue.
> >> After booting, I keep getting this output. I'm also unable to activate a
> >> regular configuration because the kernel module crashes.
> >>
> >> [ 31.289674] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 31.296625] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 61.312508] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 61.319333] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 91.335959] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 91.342763] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 121.359299] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 121.366101] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 151.382738] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 151.389539] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >>
> >>
> >>
> >> Below follows the full dmesg output:
> >> [ 0.000000] Initializing cgroup subsys cpuset
> >> [ 0.000000] Initializing cgroup subsys cpu
> >> [ 0.000000] Initializing cgroup subsys cpuacct
> >> [ 0.000000] Linux version 3.18.23 (claymore at manjaro) (gcc version
> 5.2.0
> >> (OpenWrt GCC 5.2.0 r47516) ) #6 SMP Mon Nov 30 01:54:01 WET 2015
> >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz
> >> root=PARTUUID=99c24a18-02 rootfstype=ext4 rootwait console=tty0
> >> console=ttyS0,115200n8 noinitrd intel_iommu=on
> >> [ 0.000000] KERNEL supported cpus:
> >> [ 0.000000] Intel GenuineIntel
> >> [ 0.000000] e820: BIOS-provided physical RAM map:
> >> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff]
> usable
> >> [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e1cffff]
> usable
> >> [ 0.000000] BIOS-e820: [mem 0x000000007e1d0000-0x000000007ec06fff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x000000007ec07000-0x000000007ed74fff]
> usable
> >> [ 0.000000] BIOS-e820: [mem 0x000000007ed75000-0x000000007f2effff]
> ACPI
> >> NVS
> >> [ 0.000000] BIOS-e820: [mem 0x000000007f2f0000-0x000000007f647fff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x000000007f648000-0x000000007f7fffff]
> usable
> >> [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff]
> >> reserved
> >> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff]
> usable
> >> [ 0.000000] NX (Execute Disable) protection: active
> >> [ 0.000000] SMBIOS 2.8 present.
> >> [ 0.000000] DMI: Supermicro A1SAi/A1SAi, BIOS 1.1a 08/27/2015
> >> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==>
> reserved
> >> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> >> [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
> >> [ 0.000000] MTRR default type: write-back
> >> [ 0.000000] MTRR fixed ranges enabled:
> >> [ 0.000000] 00000-9FFFF write-back
> >> [ 0.000000] A0000-BFFFF uncachable
> >> [ 0.000000] C0000-FFFFF write-protect
> >> [ 0.000000] MTRR variable ranges enabled:
> >> [ 0.000000] 0 base 080000000 mask F80000000 uncachable
> >> [ 0.000000] 1 base 280000000 mask F80000000 uncachable
> >> [ 0.000000] 2 base 300000000 mask F00000000 uncachable
> >> [ 0.000000] 3 base 400000000 mask C00000000 uncachable
> >> [ 0.000000] 4 base 800000000 mask 800000000 uncachable
> >> [ 0.000000] 5 base 07F800000 mask FFF800000 uncachable
> >> [ 0.000000] 6 disabled
> >> [ 0.000000] 7 disabled
> >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> >> 0x7010600070106
> >> [ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
> >> [ 0.000000] found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped
> at
> >> [ffff8800000fd8d0]
> >> [ 0.000000] Scanning 1 areas for low memory corruption
> >> [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size
> 24576
> >> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> >> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> >> [ 0.000000] BRK [0x028a7000, 0x028a7fff] PGTABLE
> >> [ 0.000000] BRK [0x028a8000, 0x028a8fff] PGTABLE
> >> [ 0.000000] BRK [0x028a9000, 0x028a9fff] PGTABLE
> >> [ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
> >> [ 0.000000] [mem 0x27fe00000-0x27fffffff] page 2M
> >> [ 0.000000] BRK [0x028aa000, 0x028aafff] PGTABLE
> >> [ 0.000000] init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
> >> [ 0.000000] [mem 0x27c000000-0x27fdfffff] page 2M
> >> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x27bffffff]
> >> [ 0.000000] [mem 0x200000000-0x27bffffff] page 2M
> >> [ 0.000000] BRK [0x028ab000, 0x028abfff] PGTABLE
> >> [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7e1cffff]
> >> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> >> [ 0.000000] [mem 0x00200000-0x7dffffff] page 2M
> >> [ 0.000000] [mem 0x7e000000-0x7e1cffff] page 4k
> >> [ 0.000000] init_memory_mapping: [mem 0x7ec07000-0x7ed74fff]
> >> [ 0.000000] [mem 0x7ec07000-0x7ed74fff] page 4k
> >> [ 0.000000] BRK [0x028ac000, 0x028acfff] PGTABLE
> >> [ 0.000000] init_memory_mapping: [mem 0x7f648000-0x7f7fffff]
> >> [ 0.000000] [mem 0x7f648000-0x7f7fffff] page 4k
> >> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> >> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
> >> [ 0.000000] ACPI: Early table checksum verification disabled
> >> [ 0.000000] ACPI: RSDP 0x00000000000F0530 000024 (v02 ALASKA)
> >> [ 0.000000] ACPI: XSDT 0x000000007F0CE090 00009C (v01 ALASKA A M I
> >> 01072009 AMI 00010013)
> >> [ 0.000000] ACPI: FACP 0x000000007F0D1668 00010C (v05 ALASKA A M I
> >> 01072009 AMI 00010013)
> >> [ 0.000000] ACPI: DSDT 0x000000007F0CE1C0 0034A1 (v02 ALASKA A M I
> >> 01072009 INTL 20061109)
> >> [ 0.000000] ACPI: FACS 0x000000007F2EDF80 000040
> >> [ 0.000000] ACPI: FPDT 0x000000007F0D1778 000044 (v01 ALASKA A M I
> >> 01072009 AMI 00010013)
> >> [ 0.000000] ACPI: FIDT 0x000000007F0D17C0 00009C (v01 ALASKA A M I
> >> 01072009 AMI 00010013)
> >> [ 0.000000] ACPI: SPMI 0x000000007F0D1860 000040 (v05 ALASKA A M I
> >> 00000000 AMI. 00000000)
> >> [ 0.000000] ACPI: MCFG 0x000000007F0D18A0 00003C (v01 ALASKA A M I
> >> 01072009 MSFT 00000097)
> >> [ 0.000000] ACPI: WDAT 0x000000007F0D18E0 0001AC (v01 ALASKA A M I
> >> 01072009 MSFT 00010013)
> >> [ 0.000000] ACPI: UEFI 0x000000007F0D1A90 000042 (v01
> >> 00000000 00000000)
> >> [ 0.000000] ACPI: APIC 0x000000007F0D1AD8 000098 (v03 INTEL TIANO
> >> 00000001 MSFT 00000000)
> >> [ 0.000000] ACPI: BDAT 0x000000007F0D1B70 000030 (v01
> >> 00000000 00000000)
> >> [ 0.000000] ACPI: HPET 0x000000007F0D1BA0 000038 (v01 INTEL
> >> 00000001 MSFT 01000013)
> >> [ 0.000000] ACPI: SSDT 0x000000007F0D1BD8 0009F1 (v01 PmRef CpuPm
> >> 00003000 INTL 20061109)
> >> [ 0.000000] ACPI: HEST 0x000000007F0D25D0 0000A8 (v01 INTEL AVOTON B
> >> 00000001 INTL 00000001)
> >> [ 0.000000] ACPI: BERT 0x000000007F0D2678 000030 (v01 INTEL AVOTON B
> >> 00000001 INTL 00000001)
> >> [ 0.000000] ACPI: ERST 0x000000007F0D26A8 000230 (v01 INTEL AVOTON B
> >> 00000001 INTL 00000001)
> >> [ 0.000000] ACPI: EINJ 0x000000007F0D28D8 000150 (v01 INTEL AVOTON B
> >> 00000001 INTL 00000001)
> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
> >> [ 0.000000] Zone ranges:
> >> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> >> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> >> [ 0.000000] Normal [mem 0x100000000-0x27fffffff]
> >> [ 0.000000] Movable zone start for each node
> >> [ 0.000000] Early memory node ranges
> >> [ 0.000000] node 0: [mem 0x00001000-0x00099fff]
> >> [ 0.000000] node 0: [mem 0x00100000-0x7e1cffff]
> >> [ 0.000000] node 0: [mem 0x7ec07000-0x7ed74fff]
> >> [ 0.000000] node 0: [mem 0x7f648000-0x7f7fffff]
> >> [ 0.000000] node 0: [mem 0x100000000-0x27fffffff]
> >> [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x27fffffff]
> >> [ 0.000000] On node 0 totalpages: 2090127
> >> [ 0.000000] DMA zone: 56 pages used for memmap
> >> [ 0.000000] DMA zone: 21 pages reserved
> >> [ 0.000000] DMA zone: 3993 pages, LIFO batch:0
> >> [ 0.000000] DMA32 zone: 7018 pages used for memmap
> >> [ 0.000000] DMA32 zone: 513270 pages, LIFO batch:31
> >> [ 0.000000] Normal zone: 21504 pages used for memmap
> >> [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
> >> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> >> [ 0.000000] ACPI: Local APIC address 0xfee00000
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
> >> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled)
> >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> >> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> >> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
> >> 0-23
> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
> level)
> >> [ 0.000000] ACPI: IRQ0 used by override.
> >> [ 0.000000] ACPI: IRQ9 used by override.
> >> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> >> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> >> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> >> [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI
> devices
> >> [ 0.000000] Booting paravirtualized kernel on bare hardware
> >> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
> >> nr_node_ids:1
> >> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88027fc00000 s72448
> r8192
> >> d29952 u262144
> >> [ 0.000000] pcpu-alloc: s72448 r8192 d29952 u262144 alloc=1*2097152
> >> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> >> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total
> >> pages: 2061528
> >> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz
> >> root=PARTUUID=99c24a18-02 rootfstype=ext4 rootwait console=tty0
> >> console=ttyS0,115200n8 noinitrd intel_iommu=on
> >> [ 0.000000] Intel-IOMMU: enabled
> >> [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
> >> [ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
> >> [ 0.000000] log_buf_len min size: 131072 bytes
> >> [ 0.000000] log_buf_len: 1048576 bytes
> >> [ 0.000000] early log buf free: 121016(92%)
> >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> >> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11,
> 8388608
> >> bytes)
> >> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10,
> 4194304
> >> bytes)
> >> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> >> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA -
> bailing!
> >> [ 0.000000] Memory: 8139680K/8360508K available (7420K kernel code,
> 686K
> >> rwdata, 2644K rodata, 840K init, 13604K bss, 220828K reserved)
> >> [ 0.000000] Hierarchical RCU implementation.
> >> [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
> >> [ 0.000000] NR_IRQS:4352 nr_irqs:488 0
> >> [ 0.000000] Console: colour VGA+ 80x25
> >> [ 0.000000] console [tty0] enabled
> >> [ 0.000000] console [ttyS0] enabled
> >> [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
> Inc.,
> >> Ingo Molnar
> >> [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
> >> [ 0.000000] ... MAX_LOCK_DEPTH: 48
> >> [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
> >> [ 0.000000] ... CLASSHASH_SIZE: 4096
> >> [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
> >> [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
> >> [ 0.000000] ... CHAINHASH_SIZE: 32768
> >> [ 0.000000] memory used by lock dependency info: 8159 kB
> >> [ 0.000000] per task-struct memory footprint: 1920 bytes
> >> [ 0.000000] hpet clockevent registered
> >> [ 0.000000] tsc: Fast TSC calibration failed
> >> [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
> >> [ 0.000000] tsc: Detected 2399.765 MHz processor
> >> [ 0.000087] Calibrating delay loop (skipped), value calculated using
> >> timer frequency.. 4799.53 BogoMIPS (lpj=23997650)
> >> [ 0.011688] pid_max: default: 32768 minimum: 301
> >> [ 0.016483] ACPI: Core revision 20140926
> >> [ 0.030285] ACPI: All ACPI Tables successfully acquired
> >> [ 0.035965] Mount-cache hash table entries: 16384 (order: 5, 131072
> >> bytes)
> >> [ 0.043538] Mountpoint-cache hash table entries: 16384 (order: 5,
> 131072
> >> bytes)
> >> [ 0.052175] Initializing cgroup subsys devices
> >> [ 0.057924] Initializing cgroup subsys freezer
> >> [ 0.062540] Initializing cgroup subsys net_cls
> >> [ 0.067133] Initializing cgroup subsys blkio
> >> [ 0.072101] Initializing cgroup subsys perf_event
> >> [ 0.077052] CPU: Physical Processor ID: 0
> >> [ 0.081190] CPU: Processor Core ID: 0
> >> [ 0.089536] mce: CPU supports 6 MCE banks
> >> [ 0.093690] CPU0: Thermal monitoring enabled (TM1)
> >> [ 0.098646] process: using mwait in idle threads
> >> [ 0.103937] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
> >> Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
> >> [ 0.116047] Freeing SMP alternatives memory: 32K (ffffffff81b55000 -
> >> ffffffff81b5d000)
> >> [ 0.130844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> >> [ 0.237258] smpboot: CPU0: Intel(R) Atom(TM) CPU C2750 @ 2.40GHz
> (fam:
> >> 06, model: 4d, stepping: 08)
> >> [ 0.247294] TSC deadline timer enabled
> >> [ 0.247337] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont
> >> events, full-width counters, Intel PMU driver.
> >> [ 0.258593] ... version: 3
> >> [ 0.262910] ... bit width: 40
> >> [ 0.267310] ... generic registers: 2
> >> [ 0.271633] ... value mask: 000000ffffffffff
> >> [ 0.277251] ... max period: 000000ffffffffff
> >> [ 0.282877] ... fixed-purpose events: 3
> >> [ 0.287196] ... event mask: 0000000700000003
> >> [ 0.295203] x86: Booting SMP configuration:
> >> [ 0.299698] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> >> [ 0.426427] x86: Booted up 1 node, 8 CPUs
> >> [ 0.431239] smpboot: Total of 8 processors activated (38396.24
> BogoMIPS)
> >> [ 0.440317] devtmpfs: initialized
> >> [ 0.445497] xor: measuring software checksum speed
> >> [ 0.550734] prefetch64-sse: 8196.000 MB/sec
> >> [ 0.650854] generic_sse: 7371.200 MB/sec
> >> [ 0.655431] xor: using function: prefetch64-sse (8196.000 MB/sec)
> >> [ 0.662405] NET: Registered protocol family 16
> >> [ 0.691918] cpuidle: using governor ladder
> >> [ 0.721939] cpuidle: using governor menu
> >> [ 0.733913] ACPI: bus type PCI registered
> >> [ 0.738518] dca service started, version 1.12.1
> >> [ 0.743420] PCI: Using configuration type 1 for base access
> >> [ 0.949590] raid6: sse2x1 635 MB/s
> >> [ 1.119822] raid6: sse2x2 739 MB/s
> >> [ 1.290829] raid6: sse2x4 1082 MB/s
> >> [ 1.294896] raid6: using algorithm sse2x4 (1082 MB/s)
> >> [ 1.300255] raid6: using ssse3x2 recovery algorithm
> >> [ 1.306202] ACPI: Added _OSI(Module Device)
> >> [ 1.311157] ACPI: Added _OSI(Processor Device)
> >> [ 1.315911] ACPI: Added _OSI(3.0 _SCP Extensions)
> >> [ 1.320942] ACPI: Added _OSI(Processor Aggregator Device)
> >> [ 1.341490] ACPI: Dynamic OEM Table Load:
> >> [ 1.346014] ACPI: SSDT 0xFFFF880276E1C800 000490 (v01 PmRef Cpu0Ist
> >> 00003000 INTL 20061109)
> >> [ 1.356605] ACPI: Dynamic OEM Table Load:
> >> [ 1.361131] ACPI: SSDT 0xFFFF880276E2D400 0001FA (v01 PmRef Cpu0Cst
> >> 00003001 INTL 20061109)
> >> [ 1.431132] ACPI: Dynamic OEM Table Load:
> >> [ 1.435655] ACPI: SSDT 0xFFFF880276E1C000 00047A (v01 PmRef ApIst
> >> 00003000 INTL 20061109)
> >> [ 1.484870] ACPI: Dynamic OEM Table Load:
> >> [ 1.489395] ACPI: SSDT 0xFFFF880277ABFE00 000119 (v01 PmRef ApCst
> >> 00003000 INTL 20061109)
> >> [ 1.533106] ACPI: Interpreter enabled
> >> [ 1.537097] ACPI: (supports S0 S5)
> >> [ 1.540802] ACPI: Using IOAPIC for interrupt routing
> >> [ 1.546171] PCI: Using host bridge windows from ACPI; if necessary,
> use
> >> "pci=nocrs" and report a bug
> >> [ 1.573972] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> >> [ 1.580484] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments
> >> MSI]
> >> [ 1.588067] acpi PNP0A08:00: _OSC: not requesting OS control; OS
> requires
> >> [ExtendedConfig ASPM ClockPM MSI]
> >> [ 1.599135] PCI host bridge to bus 0000:00
> >> [ 1.603545] pci_bus 0000:00: root bus resource [bus 00-ff]
> >> [ 1.609345] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> >> [ 1.615838] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> >> [ 1.622336] pci_bus 0000:00: root bus resource [mem
> >> 0x000a0000-0x000bffff]
> >> [ 1.629525] pci_bus 0000:00: root bus resource [mem
> >> 0x80000000-0xdfffffff]
> >> [ 1.636720] pci_bus 0000:00: root bus resource [mem
> >> 0x280000000-0xfffffffff]
> >> [ 1.644080] pci_bus 0000:00: root bus resource [mem
> >> 0xfed40000-0xfed44fff]
> >> [ 1.651328] pci 0000:00:00.0: [8086:1f01] type 00 class 0x060000
> >> [ 1.651771] pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400
> >> [ 1.651800] pci 0000:00:01.0: reg 0x10: [mem 0xdf3c0000-0xdf3dffff
> 64bit]
> >> [ 1.651900] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> >> [ 1.652317] pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400
> >> [ 1.652346] pci 0000:00:02.0: reg 0x10: [mem 0xdf3a0000-0xdf3bffff
> 64bit]
> >> [ 1.652445] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> >> [ 1.652771] pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400
> >> [ 1.652800] pci 0000:00:03.0: reg 0x10: [mem 0xdf380000-0xdf39ffff
> 64bit]
> >> [ 1.652898] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> >> [ 1.653242] pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000
> >> [ 1.653633] pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600
> >> [ 1.653743] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
> >> [ 1.654072] pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000
> >> [ 1.654102] pci 0000:00:13.0: reg 0x10: [mem 0xdf3f4000-0xdf3f43ff
> 64bit]
> >> [ 1.654563] pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000
> >> [ 1.654590] pci 0000:00:14.0: reg 0x10: [mem 0xdf360000-0xdf37ffff
> 64bit]
> >> [ 1.654606] pci 0000:00:14.0: reg 0x18: [io 0xe0c0-0xe0df]
> >> [ 1.654637] pci 0000:00:14.0: reg 0x20: [mem 0xdf3ec000-0xdf3effff
> 64bit]
> >> [ 1.654726] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
> >> [ 1.655062] pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000
> >> [ 1.655089] pci 0000:00:14.1: reg 0x10: [mem 0xdf340000-0xdf35ffff
> 64bit]
> >> [ 1.655104] pci 0000:00:14.1: reg 0x18: [io 0xe0a0-0xe0bf]
> >> [ 1.655136] pci 0000:00:14.1: reg 0x20: [mem 0xdf3e8000-0xdf3ebfff
> 64bit]
> >> [ 1.655225] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
> >> [ 1.655561] pci 0000:00:14.2: [8086:1f41] type 00 class 0x020000
> >> [ 1.655587] pci 0000:00:14.2: reg 0x10: [mem 0xdf320000-0xdf33ffff
> 64bit]
> >> [ 1.655603] pci 0000:00:14.2: reg 0x18: [io 0xe080-0xe09f]
> >> [ 1.655634] pci 0000:00:14.2: reg 0x20: [mem 0xdf3e4000-0xdf3e7fff
> 64bit]
> >> [ 1.655724] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> >> [ 1.656063] pci 0000:00:14.3: [8086:1f41] type 00 class 0x020000
> >> [ 1.656089] pci 0000:00:14.3: reg 0x10: [mem 0xdf300000-0xdf31ffff
> 64bit]
> >> [ 1.656105] pci 0000:00:14.3: reg 0x18: [io 0xe060-0xe07f]
> >> [ 1.656136] pci 0000:00:14.3: reg 0x20: [mem 0xdf3e0000-0xdf3e3fff
> 64bit]
> >> [ 1.656225] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
> >> [ 1.656572] pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320
> >> [ 1.656612] pci 0000:00:16.0: reg 0x10: [mem 0xdf3f3000-0xdf3f33ff]
> >> [ 1.656790] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> >> [ 1.657127] pci 0000:00:17.0: [8086:1f22] type 00 class 0x010601
> >> [ 1.657160] pci 0000:00:17.0: reg 0x10: [io 0xe150-0xe157]
> >> [ 1.657176] pci 0000:00:17.0: reg 0x14: [io 0xe140-0xe143]
> >> [ 1.657192] pci 0000:00:17.0: reg 0x18: [io 0xe130-0xe137]
> >> [ 1.657207] pci 0000:00:17.0: reg 0x1c: [io 0xe120-0xe123]
> >> [ 1.657221] pci 0000:00:17.0: reg 0x20: [io 0xe040-0xe05f]
> >> [ 1.657237] pci 0000:00:17.0: reg 0x24: [mem 0xdf3f2000-0xdf3f27ff]
> >> [ 1.657323] pci 0000:00:17.0: PME# supported from D3hot
> >> [ 1.657657] pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601
> >> [ 1.657690] pci 0000:00:18.0: reg 0x10: [io 0xe110-0xe117]
> >> [ 1.657706] pci 0000:00:18.0: reg 0x14: [io 0xe100-0xe103]
> >> [ 1.657721] pci 0000:00:18.0: reg 0x18: [io 0xe0f0-0xe0f7]
> >> [ 1.657736] pci 0000:00:18.0: reg 0x1c: [io 0xe0e0-0xe0e3]
> >> [ 1.657751] pci 0000:00:18.0: reg 0x20: [io 0xe020-0xe03f]
> >> [ 1.657767] pci 0000:00:18.0: reg 0x24: [mem 0xdf3f1000-0xdf3f17ff]
> >> [ 1.657853] pci 0000:00:18.0: PME# supported from D3hot
> >> [ 1.658190] pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100
> >> [ 1.658642] pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500
> >> [ 1.658667] pci 0000:00:1f.3: reg 0x10: [mem 0xdf3f0000-0xdf3f001f]
> >> [ 1.658720] pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f]
> >> [ 1.659257] pci 0000:01:00.0: [1a03:1150] type 01 class 0x060400
> >> [ 1.659436] pci 0000:01:00.0: supports D1 D2
> >> [ 1.659440] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> >> [ 1.659671] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe
> device. You
> >> can enable it with 'pcie_aspm=force'
> >> [ 1.670305] pci 0000:00:01.0: PCI bridge to [bus 01-02]
> >> [ 1.675849] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
> >> [ 1.675856] pci 0000:00:01.0: bridge window [mem
> 0xde000000-0xdf0fffff]
> >> [ 1.676068] pci 0000:02:00.0: [1a03:2000] type 00 class 0x030000
> >> [ 1.676110] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
> >> [ 1.676131] pci 0000:02:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff]
> >> [ 1.676151] pci 0000:02:00.0: reg 0x18: [io 0xd000-0xd07f]
> >> [ 1.676318] pci 0000:02:00.0: supports D1 D2
> >> [ 1.676323] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> >> [ 1.676635] pci 0000:01:00.0: PCI bridge to [bus 02]
> >> [ 1.681923] pci 0000:01:00.0: bridge window [io 0xd000-0xdfff]
> >> [ 1.681932] pci 0000:01:00.0: bridge window [mem
> 0xde000000-0xdf0fffff]
> >> [ 1.682145] pci 0000:03:00.0: [1912:0014] type 00 class 0x0c0330
> >> [ 1.682178] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff
> 64bit]
> >> [ 1.682357] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> >> [ 1.701985] pci 0000:00:02.0: PCI bridge to [bus 03]
> >> [ 1.707265] pci 0000:00:02.0: bridge window [mem
> 0xdf200000-0xdf2fffff]
> >> [ 1.707473] pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
> >> [ 1.707518] pci 0000:04:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff
> 64bit]
> >> [ 1.707747] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
> >> [ 1.722001] pci 0000:00:03.0: PCI bridge to [bus 04]
> >> [ 1.727284] pci 0000:00:03.0: bridge window [mem
> 0xdf100000-0xdf1fffff]
> >> [ 1.727346] pci_bus 0000:00: on NUMA node 0
> >> [ 1.727860] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12)
> >> [ 1.735016] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12)
> >> [ 1.742160] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 *10 11 12)
> >> [ 1.749315] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 10 *11 12)
> >> [ 1.756463] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *7 10 11 12)
> >> [ 1.763618] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 7 *10 11 12)
> >> [ 1.770775] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12)
> >> [ 1.777930] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 *7 10 11 12)
> >> [ 1.786590] ACPI: Enabled 1 GPEs in block 00 to 1F
> >> [ 1.792263] SCSI subsystem initialized
> >> [ 1.796436] libata version 3.00 loaded.
> >> [ 1.796497] ACPI: bus type USB registered
> >> [ 1.800928] usbcore: registered new interface driver usbfs
> >> [ 1.806793] usbcore: registered new interface driver hub
> >> [ 1.812510] usbcore: registered new device driver usb
> >> [ 1.818086] pps_core: LinuxPPS API ver. 1 registered
> >> [ 1.823362] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo
> >> Giometti <giometti at linux.it>
> >> [ 1.833068] PTP clock support registered
> >> [ 1.837507] EDAC MC: Ver: 3.0.0
> >> [ 1.841365] PCI: Using ACPI for IRQ routing
> >> [ 1.845870] PCI: pci_cache_line_size set to 64 bytes
> >> [ 1.845974] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
> >> [ 1.845987] e820: reserve RAM buffer [mem 0x7e1d0000-0x7fffffff]
> >> [ 1.845992] e820: reserve RAM buffer [mem 0x7ed75000-0x7fffffff]
> >> [ 1.845997] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
> >> [ 1.846978] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> >> [ 1.852512] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> >> [ 1.860756] Switched to clocksource hpet
> >> [ 1.865577] pnp: PnP ACPI init
> >> [ 1.869720] system 00:00: [mem 0xe0000000-0xefffffff] could not be
> >> reserved
> >> [ 1.877001] system 00:00: [mem 0x7f800000-0x7fffffff] could not be
> >> reserved
> >> [ 1.884362] system 00:00: Plug and Play ACPI device, IDs PNP0c01
> (active)
> >> [ 1.884574] system 00:01: [io 0x0680-0x069f] has been reserved
> >> [ 1.890827] system 00:01: [io 0x0400-0x047f] could not be reserved
> >> [ 1.897406] system 00:01: [io 0x0500-0x05fe] has been reserved
> >> [ 1.903652] system 00:01: [mem 0xfed00000-0xfed3ffff] could not be
> >> reserved
> >> [ 1.910955] system 00:01: [mem 0xfed50000-0xfedfffff] has been
> reserved
> >> [ 1.917884] system 00:01: [mem 0x000c0000-0x000dffff] could not be
> >> reserved
> >> [ 1.925173] system 00:01: [mem 0x000e0000-0x000fffff] could not be
> >> reserved
> >> [ 1.932456] system 00:01: [mem 0xffa00000-0xffffffff] has been
> reserved
> >> [ 1.939385] system 00:01: [mem 0xfee00000-0xfeefffff] has been
> reserved
> >> [ 1.946329] system 00:01: Plug and Play ACPI device, IDs PNP0c02
> (active)
> >> [ 1.946476] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
> (active)
> >> [ 1.947192] system 00:03: [io 0x0a00-0x0a0f] has been reserved
> >> [ 1.953438] system 00:03: [io 0x0a10-0x0a1f] has been reserved
> >> [ 1.959671] system 00:03: [io 0x0a20-0x0a2f] has been reserved
> >> [ 1.965916] system 00:03: [io 0x0a30-0x0a3f] has been reserved
> >> [ 1.972164] system 00:03: [io 0x0a40-0x0a4f] has been reserved
> >> [ 1.978401] system 00:03: Plug and Play ACPI device, IDs PNP0c02
> (active)
> >> [ 1.979195] pnp 00:04: [dma 0 disabled]
> >> [ 1.979338] pnp 00:04: Plug and Play ACPI device, IDs PNP0501
> (active)
> >> [ 1.980100] pnp 00:05: [dma 0 disabled]
> >> [ 1.980243] pnp 00:05: Plug and Play ACPI device, IDs PNP0501
> (active)
> >> [ 1.980605] pnp 00:06: Plug and Play ACPI device, IDs IPI0001
> (active)
> >> [ 1.980980] pnp: PnP ACPI: found 7 devices
> >> [ 2.000200] pci 0000:01:00.0: PCI bridge to [bus 02]
> >> [ 2.005500] pci 0000:01:00.0: bridge window [io 0xd000-0xdfff]
> >> [ 2.011918] pci 0000:01:00.0: bridge window [mem
> 0xde000000-0xdf0fffff]
> >> [ 2.019030] pci 0000:00:01.0: PCI bridge to [bus 01-02]
> >> [ 2.024571] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
> >> [ 2.031008] pci 0000:00:01.0: bridge window [mem
> 0xde000000-0xdf0fffff]
> >> [ 2.038118] pci 0000:00:02.0: PCI bridge to [bus 03]
> >> [ 2.043409] pci 0000:00:02.0: bridge window [mem
> 0xdf200000-0xdf2fffff]
> >> [ 2.050522] pci 0000:00:03.0: PCI bridge to [bus 04]
> >> [ 2.055811] pci 0000:00:03.0: bridge window [mem
> 0xdf100000-0xdf1fffff]
> >> [ 2.062934] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> >> [ 2.062938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> >> [ 2.062942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> >> [ 2.062946] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff]
> >> [ 2.062950] pci_bus 0000:00: resource 8 [mem 0x280000000-0xfffffffff]
> >> [ 2.062954] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff]
> >> [ 2.062958] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
> >> [ 2.062962] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
> >> [ 2.062966] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
> >> [ 2.062970] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
> >> [ 2.062974] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
> >> [ 2.062978] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
> >> [ 2.063090] NET: Registered protocol family 2
> >> [ 2.068509] TCP established hash table entries: 65536 (order: 7,
> 524288
> >> bytes)
> >> [ 2.076492] TCP bind hash table entries: 65536 (order: 10, 4194304
> bytes)
> >> [ 2.092823] TCP: Hash tables configured (established 65536 bind
> 65536)
> >> [ 2.099780] TCP: reno registered
> >> [ 2.103369] UDP hash table entries: 4096 (order: 7, 655360 bytes)
> >> [ 2.111002] UDP-Lite hash table entries: 4096 (order: 7, 655360
> bytes)
> >> [ 2.119441] NET: Registered protocol family 1
> >> [ 2.141369] pci 0000:02:00.0: Video device with shadowed ROM
> >> [ 2.141919] PCI: CLS 64 bytes, default 64
> >> [ 2.142265] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> >> [ 2.149023] software IO TLB [mem 0x7a1d0000-0x7e1d0000] (64MB)
> mapped at
> >> [ffff88007a1d0000-ffff88007e1cffff]
> >> [ 2.161828] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.168082] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.174333] microcode: CPU2 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.180584] microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.186853] microcode: CPU4 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.193113] microcode: CPU5 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.199375] microcode: CPU6 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.205628] microcode: CPU7 sig=0x406d8, pf=0x1, revision=0x127
> >> [ 2.212051] microcode: Microcode Update Driver: v2.00
> >> <tigran at aivazian.fsnet.co.uk>, Peter Oruba
> >> [ 2.222855] Scanning for low memory corruption every 60 seconds
> >> [ 2.230591] futex hash table entries: 2048 (order: 6, 262144 bytes)
> >> [ 2.238381] zpool: loaded
> >> [ 2.241337] zbud: loaded
> >> [ 2.245028] ntfs: driver 2.1.31 [Flags: R/W].
> >> [ 2.249912] fuse init (API version 7.23)
> >> [ 2.254533] JFS: nTxBlock = 8192, nTxLock = 65536
> >> [ 2.265120] msgmni has been set to 15897
> >> [ 2.270141] async_tx: api initialized (async)
> >> [ 2.274899] Block layer SCSI generic (bsg) driver version 0.4 loaded
> >> (major 250)
> >> [ 2.282876] io scheduler noop registered
> >> [ 2.287108] io scheduler deadline registered (default)
> >> [ 2.292581] io scheduler cfq registered
> >> [ 2.298274] intel_idle: MWAIT substates: 0x3000020
> >> [ 2.298279] intel_idle: v0.4 model 0x4D
> >> [ 2.298282] intel_idle: lapic_timer_reliable_states 0xffffffff
> >> [ 2.299591] ipmi message handler version 39.2
> >> [ 2.304280] ipmi device interface
> >> [ 2.308017] IPMI System Interface driver.
> >> [ 2.312457] ipmi_si: probing via ACPI
> >> [ 2.316468] ipmi_si 00:06: [io 0x0ca2] regsize 1 spacing 1 irq 0
> >> [ 2.322882] ipmi_si: Adding ACPI-specified kcs state machine
> >> [ 2.329004] ipmi_si: probing via SMBIOS
> >> [ 2.333152] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
> >> [ 2.339383] ipmi_si: Adding SMBIOS-specified kcs state machine
> duplicate
> >> interface
> >> [ 2.347595] ipmi_si: probing via SPMI
> >> [ 2.351580] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
> >> [ 2.357633] ipmi_si: Adding SPMI-specified kcs state machine
> duplicate
> >> interface
> >> [ 2.365671] ipmi_si: Trying ACPI-specified kcs state machine at i/o
> >> address 0xca2, slave address 0x0, irq 0
> >> [ 2.646525] ipmi_si 00:06: Found new BMC (man_id: 0x002a7c, prod_id:
> >> 0x0813, dev_id: 0x20)
> >> [ 2.655855] ipmi_si 00:06: IPMI kcs interface initialized
> >> [ 2.663519] IPMI Watchdog: driver initialized
> >> [ 2.668190] Copyright (C) 2004 MontaVista Software - IPMI Powerdown
> via
> >> sys_reboot.
> >> [ 2.676996] IPMI poweroff: ATCA Detect mfg 0x2A7C prod 0x813
> >> [ 2.682981] IPMI poweroff: Found a chassis style poweroff function
> >> [ 2.691856] input: Power Button as
> >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> >> [ 2.699838] ACPI: Power Button [PWRF]
> >> [ 2.706243] ioatdma: Intel(R) QuickData Technology Driver 4.00
> >> [ 2.712850] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
> >> [ 2.740599] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
> is a
> >> 16550A
> >> [ 2.769817] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
> is a
> >> 16550A
> >> [ 2.782288] Non-volatile memory driver v1.3
> >> [ 2.787411] Guest personality initialized and is inactive
> >> [ 2.793366] VMCI host device registered (name=vmci, major=10,
> minor=63)
> >> [ 2.800290] Initialized host personality
> >> [ 2.805077] VMware PVSCSI driver - version 1.0.5.0-k
> >> [ 2.810567] ahci 0000:00:17.0: version 3.0
> >> [ 2.811008] ahci 0000:00:17.0: irq 24 for MSI/MSI-X
> >> [ 2.831537] ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3
> Gbps 0xf
> >> impl SATA mode
> >> [ 2.840172] ahci 0000:00:17.0: flags: 64bit ncq led clo pio sxs deso
> sadm
> >> sds apst
> >> [ 2.851137] scsi host0: ahci
> >> [ 2.855026] scsi host1: ahci
> >> [ 2.858797] scsi host2: ahci
> >> [ 2.862586] scsi host3: ahci
> >> [ 2.873599] ata1: SATA max UDMA/133 abar m2048 at 0xdf3f2000 port
> 0xdf3f2100
> >> irq 24
> >> [ 2.881549] ata2: SATA max UDMA/133 abar m2048 at 0xdf3f2000 port
> 0xdf3f2180
> >> irq 24
> >> [ 2.889483] ata3: SATA max UDMA/133 abar m2048 at 0xdf3f2000 port
> 0xdf3f2200
> >> irq 24
> >> [ 2.897427] ata4: SATA max UDMA/133 abar m2048 at 0xdf3f2000 port
> 0xdf3f2280
> >> irq 24
> >> [ 2.905836] ahci 0000:00:18.0: irq 25 for MSI/MSI-X
> >> [ 2.921710] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6
> Gbps 0x3
> >> impl SATA mode
> >> [ 2.930348] ahci 0000:00:18.0: flags: 64bit ncq led clo pio sxs deso
> sadm
> >> sds apst
> >> [ 2.939966] scsi host4: ahci
> >> [ 2.943794] scsi host5: ahci
> >> [ 2.947251] ata5: SATA max UDMA/133 abar m2048 at 0xdf3f1000 port
> 0xdf3f1100
> >> irq 25
> >> [ 2.955197] ata6: SATA max UDMA/133 abar m2048 at 0xdf3f1000 port
> 0xdf3f1180
> >> irq 25
> >> [ 2.963760] VMware vmxnet3 virtual NIC driver - version
> 1.2.1.0-k-NAPI
> >> [ 2.970935] VFIO - User Level meta-driver version: 0.3
> >> [ 2.977464] xhci_hcd 0000:03:00.0: xHCI Host Controller
> >> [ 2.983639] xhci_hcd 0000:03:00.0: new USB bus registered, assigned
> bus
> >> number 1
> >> [ 3.102093] xhci_hcd 0000:03:00.0: irq 26 for MSI/MSI-X
> >> [ 3.102110] xhci_hcd 0000:03:00.0: irq 27 for MSI/MSI-X
> >> [ 3.102125] xhci_hcd 0000:03:00.0: irq 28 for MSI/MSI-X
> >> [ 3.102140] xhci_hcd 0000:03:00.0: irq 29 for MSI/MSI-X
> >> [ 3.102155] xhci_hcd 0000:03:00.0: irq 30 for MSI/MSI-X
> >> [ 3.102169] xhci_hcd 0000:03:00.0: irq 31 for MSI/MSI-X
> >> [ 3.102187] xhci_hcd 0000:03:00.0: irq 32 for MSI/MSI-X
> >> [ 3.102202] xhci_hcd 0000:03:00.0: irq 33 for MSI/MSI-X
> >> [ 3.103235] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> >> [ 3.110336] usb usb1: New USB device strings: Mfr=3, Product=2,
> >> SerialNumber=1
> >> [ 3.118110] usb usb1: Product: xHCI Host Controller
> >> [ 3.123305] usb usb1: Manufacturer: Linux 3.18.23 xhci-hcd
> >> [ 3.129099] usb usb1: SerialNumber: 0000:03:00.0
> >> [ 3.135162] hub 1-0:1.0: USB hub found
> >> [ 3.139322] hub 1-0:1.0: 4 ports detected
> >> [ 3.145219] xhci_hcd 0000:03:00.0: xHCI Host Controller
> >> [ 3.151055] xhci_hcd 0000:03:00.0: new USB bus registered, assigned
> bus
> >> number 2
> >> [ 3.159548] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0003
> >> [ 3.166662] usb usb2: New USB device strings: Mfr=3, Product=2,
> >> SerialNumber=1
> >> [ 3.174437] usb usb2: Product: xHCI Host Controller
> >> [ 3.179622] usb usb2: Manufacturer: Linux 3.18.23 xhci-hcd
> >> [ 3.185423] usb usb2: SerialNumber: 0000:03:00.0
> >> [ 3.191115] hub 2-0:1.0: USB hub found
> >> [ 3.195286] hub 2-0:1.0: 4 ports detected
> >> [ 3.200702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> >> [ 3.207572] ehci-pci: EHCI PCI platform driver
> >> [ 3.212807] ehci-pci 0000:00:16.0: EHCI Host Controller
> >> [ 3.218465] tsc: Refined TSC clocksource calibration: 2399.999 MHz
> >> [ 3.218598] ehci-pci 0000:00:16.0: new USB bus registered, assigned
> bus
> >> number 3
> >> [ 3.218638] ehci-pci 0000:00:16.0: debug port 2
> >> [ 3.222644] ehci-pci 0000:00:16.0: cache line size of 64 is not
> supported
> >> [ 3.222698] ehci-pci 0000:00:16.0: irq 23, io mem 0xdf3f3000
> >> [ 3.241944] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00
> >> [ 3.242237] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0002
> >> [ 3.242240] usb usb3: New USB device strings: Mfr=3, Product=2,
> >> SerialNumber=1
> >> [ 3.242242] usb usb3: Product: EHCI Host Controller
> >> [ 3.242245] usb usb3: Manufacturer: Linux 3.18.23 ehci_hcd
> >> [ 3.242247] usb usb3: SerialNumber: 0000:00:16.0
> >> [ 3.242806] hub 3-0:1.0: USB hub found
> >> [ 3.242842] hub 3-0:1.0: 8 ports detected
> >> [ 3.244035] ehci-platform: EHCI generic platform driver
> >> [ 3.244077] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> >> [ 3.244100] ohci-pci: OHCI PCI platform driver
> >> [ 3.244159] ohci-platform: OHCI generic platform driver
> >> [ 3.244200] uhci_hcd: USB Universal Host Controller Interface driver
> >> [ 3.244341] usbcore: registered new interface driver uas
> >> [ 3.244423] usbcore: registered new interface driver usb-storage
> >> [ 3.244465] usbcore: registered new interface driver ums-alauda
> >> [ 3.244506] usbcore: registered new interface driver ums-cypress
> >> [ 3.244544] usbcore: registered new interface driver ums-datafab
> >> [ 3.244584] usbcore: registered new interface driver ums_eneub6250
> >> [ 3.244623] usbcore: registered new interface driver ums-freecom
> >> [ 3.244663] usbcore: registered new interface driver ums-isd200
> >> [ 3.244705] usbcore: registered new interface driver ums-jumpshot
> >> [ 3.244745] usbcore: registered new interface driver ums-karma
> >> [ 3.244784] usbcore: registered new interface driver ums-onetouch
> >> [ 3.244842] usbcore: registered new interface driver ums-realtek
> >> [ 3.244882] usbcore: registered new interface driver ums-sddr09
> >> [ 3.244921] usbcore: registered new interface driver ums-sddr55
> >> [ 3.244963] usbcore: registered new interface driver ums-usbat
> >> [ 3.245284] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> >> [ 3.256269] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >> [ 3.264436] ata1: SATA link down (SStatus 0 SControl 300)
> >> [ 3.266499] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >> [ 3.268533] ata2: SATA link down (SStatus 0 SControl 300)
> >> [ 3.270877] ata4.00: ATA-9: WDC WD7500BFCX-68N6GN0, 82.00A82, max
> >> UDMA/133
> >> [ 3.270880] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth
> >> 31/32), AA
> >> [ 3.270905] ata3.00: ATA-9: WDC WD7500BFCX-68N6GN0, 82.00A82, max
> >> UDMA/133
> >> [ 3.270909] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth
> >> 31/32), AA
> >> [ 3.271897] ata4.00: configured for UDMA/133
> >> [ 3.271968] ata3.00: configured for UDMA/133
> >> [ 3.282839] scsi 2:0:0:0: Direct-Access ATA WDC WD7500BFCX-6
> >> 0A82 PQ: 0 ANSI: 5
> >> [ 3.284130] sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks:
> (750
> >> GB/698 GiB)
> >> [ 3.284133] sd 2:0:0:0: [sda] 4096-byte physical blocks
> >> [ 3.284323] sd 2:0:0:0: [sda] Write Protect is off
> >> [ 3.284326] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> >> [ 3.284425] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled,
> >> doesn't support DPO or FUA
> >> [ 3.285234] scsi 3:0:0:0: Direct-Access ATA WDC WD7500BFCX-6
> >> 0A82 PQ: 0 ANSI: 5
> >> [ 3.286022] sd 3:0:0:0: [sdb] 1465149168 512-byte logical blocks:
> (750
> >> GB/698 GiB)
> >> [ 3.286025] sd 3:0:0:0: [sdb] 4096-byte physical blocks
> >> [ 3.286219] sd 3:0:0:0: [sdb] Write Protect is off
> >> [ 3.286222] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> >> [ 3.286320] sd 3:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled,
> >> doesn't support DPO or FUA
> >> [ 3.322050] ata5: SATA link down (SStatus 0 SControl 300)
> >> [ 3.322128] ata6: SATA link down (SStatus 0 SControl 300)
> >> [ 3.335044] sda: sda1
> >> [ 3.336290] sd 2:0:0:0: [sda] Attached SCSI disk
> >> [ 3.339250] sdb: sdb1
> >> [ 3.340242] sd 3:0:0:0: [sdb] Attached SCSI disk
> >> [ 3.518421] serio: i8042 KBD port at 0x60,0x64 irq 1
> >> [ 3.518500] usb 2-1: new SuperSpeed USB device number 2 using
> xhci_hcd
> >> [ 3.519861] rtc_cmos 00:02: RTC can wake from S4
> >> [ 3.520612] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> >> [ 3.520757] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram,
> hpet
> >> irqs
> >> [ 3.520810] i2c /dev entries driver
> >> [ 3.522428] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> >> [ 3.523755] ismt_smbus 0000:00:13.0: irq 34 for MSI/MSI-X
> >> [ 3.524310] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> >> [ 3.524378] iTCO_wdt: Found a Avoton SoC TCO device (Version=3,
> >> TCOBASE=0x0460)
> >> [ 3.524524] watchdog: iTCO_wdt: cannot register miscdev on minor=130
> >> (err=-16).
> >> [ 3.524525] watchdog: iTCO_wdt: a legacy watchdog module is probably
> >> present.
> >> [ 3.524776] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> >> [ 3.524811] md: raid0 personality registered for level 0
> >> [ 3.524836] md: raid1 personality registered for level 1
> >> [ 3.524839] md: raid10 personality registered for level 10
> >> [ 3.525088] md: raid6 personality registered for level 6
> >> [ 3.525090] md: raid5 personality registered for level 5
> >> [ 3.525091] md: raid4 personality registered for level 4
> >> [ 3.533369] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17)
> initialised:
> >> dm-devel at redhat.com
> >> [ 3.536535] device-mapper: raid: Loading target version 1.6.0
> >> [ 3.536676] hidraw: raw HID events driver (C) Jiri Kosina
> >> [ 3.537052] usbcore: registered new interface driver usbhid
> >> [ 3.537053] usbhid: USB HID core driver
> >> [ 3.537312] TCP: cubic registered
> >> [ 3.545819] input: AT Translated Set 2 keyboard as
> >> /devices/platform/i8042/serio0/input/input1
> >> [ 3.549611] NET: Registered protocol family 10
> >> [ 3.553054] usb 2-1: New USB device found, idVendor=0df6,
> idProduct=0072
> >> [ 3.553057] usb 2-1: New USB device strings: Mfr=1, Product=2,
> >> SerialNumber=3
> >> [ 3.553060] usb 2-1: Product: Sitecom USB 3.0 Gigabit
> >> [ 3.553062] usb 2-1: Manufacturer: Sitecom Europe BV
> >> [ 3.553064] usb 2-1: SerialNumber: 00000000000001
> >> [ 3.562181] usb 3-1: new high-speed USB device number 2 using
> ehci-pci
> >> [ 3.567744] NET: Registered protocol family 17
> >> [ 3.567850] bridge: automatic filtering via arp/ip/ip6tables has been
> >> deprecated. Update your scripts to load br_netfilter if you need this.
> >> [ 3.712812] usb 3-1: New USB device found, idVendor=8087,
> idProduct=07db
> >> [ 3.712815] usb 3-1: New USB device strings: Mfr=0, Product=0,
> >> SerialNumber=0
> >> [ 3.713600] hub 3-1:1.0: USB hub found
> >> [ 3.713792] hub 3-1:1.0: 4 ports detected
> >> [ 3.748201] Bridge firewalling registered
> >> [ 3.748207] 8021q: 802.1Q VLAN Support v1.8
> >> [ 3.753925] NET: Registered protocol family 40
> >> [ 3.756137] registered taskstats version 1
> >> [ 3.823393] Btrfs loaded
> >> [ 3.836358] rtc_cmos 00:02: setting system clock to 2001-03-13
> 11:48:39
> >> UTC (984484119)
> >> [ 3.843422] usb 2-4: new SuperSpeed USB device number 3 using
> xhci_hcd
> >> [ 3.896100] md: Waiting for all devices to be available before
> autodetect
> >> [ 3.903221] md: If you don't use raid, use raid=noautodetect
> >> [ 3.910592] md: Autodetecting RAID arrays.
> >> [ 3.915453] md: invalid raid superblock magic on sda1
> >> [ 3.920830] md: sda1 does not have a valid v0.90 superblock, not
> >> importing!
> >> [ 3.928313] md: invalid raid superblock magic on sdb1
> >> [ 3.933692] md: sdb1 does not have a valid v0.90 superblock, not
> >> importing!
> >> [ 3.940989] md: Scanned 2 and added 0 devices.
> >> [ 3.945752] md: autorun ...
> >> [ 3.948851] md: ... autorun DONE.
> >> [ 3.952512] Waiting for root device PARTUUID=99c24a18-02...
> >> [ 3.964996] usb 2-4: New USB device found, idVendor=0951,
> idProduct=16a3
> >> [ 3.972023] usb 2-4: New USB device strings: Mfr=1, Product=2,
> >> SerialNumber=3
> >> [ 3.979481] usb 2-4: Product: DT microDuo 3.0
> >> [ 3.991681] usb 2-4: Manufacturer: Kingston
> >> [ 3.996176] usb 2-4: SerialNumber: AC220B280602BF31E99A3F20
> >> [ 4.004097] usb-storage 2-4:1.0: USB Mass Storage device detected
> >> [ 4.011180] scsi host6: usb-storage 2-4:1.0
> >> [ 4.012579] usb 3-1.3: new high-speed USB device number 3 using
> ehci-pci
> >> [ 4.123366] usb 3-1.3: New USB device found, idVendor=0557,
> >> idProduct=7000
> >> [ 4.130555] usb 3-1.3: New USB device strings: Mfr=0, Product=0,
> >> SerialNumber=0
> >> [ 4.139291] hub 3-1.3:1.0: USB hub found
> >> [ 4.143774] hub 3-1.3:1.0: 4 ports detected
> >> [ 4.442936] usb 3-1.3.1: new low-speed USB device number 4 using
> ehci-pci
> >> [ 4.587252] usb 3-1.3.1: New USB device found, idVendor=0557,
> >> idProduct=2419
> >> [ 4.594625] usb 3-1.3.1: New USB device strings: Mfr=0, Product=0,
> >> SerialNumber=0
> >> [ 4.605036] input: HID 0557:2419 as
> >>
> /devices/pci0000:00/0000:00:16.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/0003:0557:2419.0001/input/input2
> >> [ 4.619102] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID
> v1.00
> >> Keyboard [HID 0557:2419] on usb-0000:00:16.0-1.3.1/input0
> >> [ 4.632892] input: HID 0557:2419 as
> >>
> /devices/pci0000:00/0000:00:16.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/0003:0557:2419.0002/input/input3
> >> [ 4.646170] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID
> v1.00
> >> Mouse [HID 0557:2419] on usb-0000:00:16.0-1.3.1/input1
> >> [ 4.893678] Switched to clocksource tsc
> >> [ 5.089660] scsi 6:0:0:0: Direct-Access Kingston DT microDuo 3.0
> >> PMAP PQ: 0 ANSI: 6
> >> [ 6.822521] sd 6:0:0:0: [sdc] 61457664 512-byte logical blocks: (31.4
> >> GB/29.3 GiB)
> >> [ 6.830980] sd 6:0:0:0: [sdc] Write Protect is off
> >> [ 6.836091] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
> >> [ 6.836377] sd 6:0:0:0: [sdc] No Caching mode page found
> >> [ 6.842009] sd 6:0:0:0: [sdc] Assuming drive cache: write through
> >> [ 6.873852] sdc: sdc1 sdc2
> >> [ 6.878999] sd 6:0:0:0: [sdc] Attached SCSI removable disk
> >> [ 6.931471] EXT4-fs (sdc2): mounted filesystem with ordered data
> mode.
> >> Opts: (null)
> >> [ 6.939726] VFS: Mounted root (ext4 filesystem) readonly on device
> 8:34.
> >> [ 6.947476] devtmpfs: mounted
> >> [ 6.952301] Freeing unused kernel memory: 840K (ffffffff81a83000 -
> >> ffffffff81b55000)
> >> [ 7.275255] init: Can't open /sys/block/zram0/disksize: No such file
> or
> >> directory
> >> [ 7.283531] init: Console is alive
> >> [ 7.287346] init: - watchdog -
> >> [ 7.313836] Button Hotplug driver version 0.4.1
> >> [ 7.320276] exFAT: Version 1.2.9
> >> [ 7.335883] SGI XFS with ACLs, security attributes, realtime, no
> debug
> >> enabled
> >> [ 8.298340] init: - preinit -
> >> [ 8.325603] random: mktemp urandom read with 97 bits of entropy
> available
> >> [ 11.367168] mount_root: mounting /dev/root
> >> [ 11.380934] EXT4-fs (sdc2): re-mounted. Opts: (null)
> >> [ 11.396922] random: nonblocking pool is initialized
> >> [ 11.435049] EXT4-fs (sdc1): mounted filesystem without journal. Opts:
> >> (null)
> >> [ 11.485559] procd: - early -
> >> [ 11.488828] procd: - watchdog -
> >> [ 12.136699] procd: - ubus -
> >> [ 13.147156] procd: - init -
> >> [ 14.019236] FS-Cache: Loaded
> >> [ 14.024273] Key type dns_resolver registered
> >> [ 14.034958] Initializing XFRM netlink socket
> >> [ 14.040136] NET: Registered protocol family 15
> >> [ 14.050882] loop: module loaded
> >> [ 14.055873] nbd: registered device at major 43
> >> [ 14.069146] tun: Universal TUN/TAP device driver, 1.6
> >> [ 14.074526] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
> >> [ 14.089331] sit: IPv6 over IPv4 tunneling driver
> >> [ 14.099065] ip6_tables: (C) 2000-2006 Netfilter Core Team
> >> [ 14.112125] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> >> [ 14.901825] Netfilter messages via NETLINK v0.30.
> >> [ 14.907605] ip_set: protocol 6
> >> [ 17.134710] cryptodev: driver 1.7 loaded.
> >> [ 19.235144] u32 classifier
> >> [ 19.238165] input device check on
> >> [ 19.242135] Actions configured
> >> [ 19.495362] Mirror/redirect action on
> >> [ 20.696256] netem: version 1.3
> >> [ 22.287668] Bluetooth: Core ver 2.19
> >> [ 22.291612] NET: Registered protocol family 31
> >> [ 22.296361] Bluetooth: HCI device and connection manager initialized
> >> [ 22.303152] Bluetooth: HCI socket layer initialized
> >> [ 22.308355] Bluetooth: L2CAP socket layer initialized
> >> [ 22.313755] Bluetooth: SCO socket layer initialized
> >> [ 22.320083] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> >> [ 22.325708] Bluetooth: BNEP filters: protocol multicast
> >> [ 22.331261] Bluetooth: BNEP socket layer initialized
> >> [ 22.337086] usbcore: registered new interface driver btusb
> >> [ 22.343369] usbcore: registered new interface driver cdc_wdm
> >> [ 22.350207] Loading modules backported from Linux version
> >> master-2015-10-26-0-g28c26cb
> >> [ 22.358682] Backport generated by backports.git
> >> backports-20150903-4-g12cf266
> >> [ 22.367660] usbcore: registered new interface driver dmx_usb
> >> [ 22.373627]
> >>
> /home/ArkHDD/OpenWRT/trunk/build_dir/target-x86_64_glibc-2.21/linux-x86_64/dmx_usb_module-0.1.20130818/dmx_usb.c:
> >> DMX USB Driver v0.1.20130818
> >> [ 22.388416] Bluetooth: HCI UART driver ver 2.2
> >> [ 22.393167] Bluetooth: HCI H4 protocol initialized
> >> [ 22.398274] Bluetooth: HCI BCSP protocol initialized
> >> [ 22.404022] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> >> [ 22.410285] Bluetooth: HIDP socket layer initialized
> >> [ 22.416157] hso: drivers/net/usb/hso.c: Option Wireless
> >> [ 22.421833] usbcore: registered new interface driver hso
> >> [ 22.428205] ip_tables: (C) 2000-2006 Netfilter Core Team
> >> [ 22.434232] usbcore: registered new interface driver ipheth
> >> [ 22.444612] usbcore: registered new interface driver kaweth
> >> [ 22.450933] lib80211: common routines for IEEE802.11 drivers
> >> [ 22.456999] lib80211_crypt: registered algorithm 'NULL'
> >> [ 22.457349] lib80211_crypt: registered algorithm 'CCMP'
> >> [ 22.457652] lib80211_crypt: registered algorithm 'TKIP'
> >> [ 22.457910] lib80211_crypt: registered algorithm 'WEP'
> >> [ 22.490311] ctnetlink v0.93: registering with nfnetlink.
> >> [ 22.497609] nf_conntrack_rtsp v0.7 loading
> >> [ 22.628968] nf_nat_rtsp v0.7 loading
> >> [ 22.635109] nf_tables: (c) 2007-2009 Patrick McHardy <
> kaber at trash.net>
> >> [ 22.649499] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB
> Ethernet
> >> driver
> >> [ 22.657561] usbcore: registered new interface driver pegasus
> >> [ 22.664174] usbcore: registered new interface driver r8152
> >> [ 22.671236] Bluetooth: RFCOMM TTY layer initialized
> >> [ 22.676442] Bluetooth: RFCOMM socket layer initialized
> >> [ 22.681932] Bluetooth: RFCOMM ver 1.11
> >> [ 22.686575] usbcore: registered new interface driver rtl8150
> >> [ 22.694261] usbcore: registered new interface driver usblp
> >> [ 22.702994] usbcore: registered new interface driver usbserial
> >> [ 22.709225] usbcore: registered new interface driver
> usbserial_generic
> >> [ 22.716447] usbserial: USB Serial support registered for generic
> >> [ 22.733756] xt_time: kernel timezone is -0000
> >> [ 22.738879] usbcore: registered new interface driver ark3116
> >> [ 22.744954] usbserial: USB Serial support registered for ark3116
> >> [ 22.752591] usbcore: registered new interface driver asix
> >> [ 23.106430] ax88179_178a 2-1:1.0 eth0: register 'ax88179_178a' at
> >> usb-0000:03:00.0-1, Sitecom USB 3.0 to Gigabit Adapter,
> 64:d1:a3:31:7c:1e
> >> [ 23.119626] usbcore: registered new interface driver ax88179_178a
> >> [ 23.126733] usbcore: registered new interface driver belkin_sa
> >> [ 23.132984] usbserial: USB Serial support registered for Belkin /
> Peracom
> >> / GoHubs USB Serial Adapter
> >> [ 23.143216] usbcore: registered new interface driver cdc_eem
> >> [ 23.149820] usbcore: registered new interface driver cdc_ether
> >> [ 23.156907] usbcore: registered new interface driver cdc_ncm
> >> [ 23.163313] usbcore: registered new interface driver cdc_subset
> >> [ 23.175786] cfg80211: World regulatory domain updated:
> >> [ 23.176325] usbcore: registered new interface driver ch341
> >> [ 23.176419] usbserial: USB Serial support registered for ch341-uart
> >> [ 23.176865] usbcore: registered new interface driver cp210x
> >> [ 23.176937] usbserial: USB Serial support registered for cp210x
> >> [ 23.177471] usbcore: registered new interface driver cypress_m8
> >> [ 23.177557] usbserial: USB Serial support registered for DeLorme
> >> Earthmate USB
> >> [ 23.177624] usbserial: USB Serial support registered for HID->COM
> RS232
> >> Adapter
> >> [ 23.177690] usbserial: USB Serial support registered for Nokia CA-42
> V2
> >> Adapter
> >> [ 23.178474] usbcore: registered new interface driver dm9601
> >> [ 23.179097] usbcore: registered new interface driver ftdi_sio
> >> [ 23.179185] usbserial: USB Serial support registered for FTDI USB
> Serial
> >> Device
> >> [ 23.179772] usbcore: registered new interface driver huawei_cdc_ncm
> >> [ 23.182640] Intel(R) Wireless WiFi driver for Linux
> >> [ 23.182641] Copyright(c) 2003- 2015 Intel Corporation
> >> [ 23.183048] iwlwifi 0000:04:00.0: irq 35 for MSI/MSI-X
> >> [ 23.184986] usbcore: registered new interface driver kalmia
> >> [ 23.187368] iwlwifi 0000:04:00.0: Direct firmware load for
> >> iwlwifi-7260-17.ucode failed with error -2
> >> [ 23.187421] iwlwifi 0000:04:00.0: Falling back to user helper
> >> [ 23.193366] firmware iwlwifi-7260-17.ucode: firmware_loading_store:
> map
> >> pages failed
> >> [ 23.194132] iwlwifi 0000:04:00.0: Direct firmware load for
> >> iwlwifi-7260-16.ucode failed with error -2
> >> [ 23.194135] iwlwifi 0000:04:00.0: Falling back to user helper
> >> [ 23.199391] firmware iwlwifi-7260-16.ucode: firmware_loading_store:
> map
> >> pages failed
> >> [ 23.199586] iwlwifi 0000:04:00.0: Direct firmware load for
> >> iwlwifi-7260-15.ucode failed with error -2
> >> [ 23.199588] iwlwifi 0000:04:00.0: Falling back to user helper
> >> [ 23.204962] firmware iwlwifi-7260-15.ucode: firmware_loading_store:
> map
> >> pages failed
> >> [ 23.205149] iwlwifi 0000:04:00.0: Direct firmware load for
> >> iwlwifi-7260-14.ucode failed with error -2
> >> [ 23.205151] iwlwifi 0000:04:00.0: Falling back to user helper
> >> [ 23.210567] firmware iwlwifi-7260-14.ucode: firmware_loading_store:
> map
> >> pages failed
> >> [ 23.243146] iwlwifi 0000:04:00.0: loaded firmware version 25.30.13.0
> >> op_mode iwlmvm
> >> [ 23.244865] iwlwifi 0000:04:00.0: failed to load module iwlmvm (error
> >> 256), is dynamic loading enabled?
> >> [ 23.392944] cfg80211: DFS Master region: unset
> >> [ 23.397380] cfg80211: (start_freq - end_freq @ bandwidth),
> >> (max_antenna_gain, max_eirp), (dfs_cac_time)
> >> [ 23.415567] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
> (N/A,
> >> 2000 mBm), (N/A)
> >> [ 23.424112] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
> (N/A,
> >> 2000 mBm), (N/A)
> >> [ 23.432666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
> (N/A,
> >> 2000 mBm), (N/A)
> >> [ 23.441219] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz,
> 160000
> >> KHz AUTO), (N/A, 2000 mBm), (N/A)
> >> [ 23.451249] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz,
> 160000
> >> KHz AUTO), (N/A, 2000 mBm), (0 s)
> >> [ 23.461272] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
> (N/A,
> >> 2000 mBm), (0 s)
> >> [ 23.469909] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
> (N/A,
> >> 2000 mBm), (N/A)
> >> [ 23.478462] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
> >> (N/A, 0 mBm), (N/A)
> >> [ 23.488137] usbcore: registered new interface driver MOSCHIP
> usb-ethernet
> >> driver
> >> [ 23.505393] usbcore: registered new interface driver p54usb
> >> [ 23.512373] PPP generic driver version 2.4.2
> >> [ 23.518043] NET: Registered protocol family 24
> >> [ 23.523505] usbcore: registered new interface driver qmi_wwan
> >> [ 23.530594] usbcore: registered new interface driver rndis_host
> >> [ 23.540765] usbcore: registered new interface driver rt73usb
> >> [ 23.548081] usbcore: registered new interface driver rtl8187
> >> [ 23.557503] usbcore: registered new interface driver sierra_net
> >> [ 23.564754] usbcore: registered new interface driver smsc95xx
> >> [ 23.580501] usbcore: registered new interface driver carl9170
> >> [ 23.587349] usbcore: registered new interface driver cdc_mbim
> >> [ 23.594954] usbcore: registered new interface driver ipw
> >> [ 23.600684] usbserial: USB Serial support registered for IPWireless
> >> converter
> >> [ 23.612869] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band
> Wireless AC
> >> 7260, REV=0x144
> >> [ 23.622011] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
> >> [ 23.628420] iwlwifi 0000:04:00.0: L1 Disabled - LTR Disabled
> >> [ 23.820013] ieee80211 phy0: Selected rate control algorithm
> 'iwl-mvm-rs'
> >> [ 23.823327] usbcore: registered new interface driver rt2500usb
> >> [ 23.832721] usbcore: registered new interface driver rt2800usb
> >> [ 23.845513] usbcore: registered new interface driver ath9k_htc
> >> [ 23.853636] usbcore: registered new interface driver rtl8192cu
> >> [ 26.792774] device eth0 entered promiscuous mode
> >> [ 26.799036] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
> >> [ 31.289674] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 31.296625] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 61.312508] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 61.319333] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 91.335959] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 91.342763] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 121.359299] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 121.366101] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 151.382738] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >> [ 151.389539] iwlwifi 0000:04:00.0: iwl_trans_send_cmd bad state = 0
> >>
> >>
> >> --
> >>
> >> Carlos Miguel Ferreira
> >> Researcher at Telecommunications Institute
> >> Aveiro - Portugal
> >> Work E-mail - cmf at av.it.pt
> >> Skype & GTalk -> carlosmf.pt at gmail.com
> >> LinkedIn -> http://www.linkedin.com/in/carlosmferreira
> >>
> >> _______________________________________________
> >> openwrt-devel mailing list
> >> openwrt-devel at lists.openwrt.org
> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >>
>
--
Carlos Miguel Ferreira
Researcher at Telecommunications Institute
Aveiro - Portugal
Work E-mail - cmf at av.it.pt
Skype & GTalk -> carlosmf.pt at gmail.com
LinkedIn -> http://www.linkedin.com/in/carlosmferreira
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151201/e45c8342/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list