[OpenWrt-Devel] AR8334 switch support

[Kathy Giori]

On Tue, Apr 28, 2015 at 5:15 AM, Christian Mehlis <christian at m3hlis.de> wrote:
> Am 27.04.2015 um 20:56 schrieb Heiner Kallweit:
>>
>> The only other difference I found is the initial setting of LED_CTRL3
>> register.
>> Could you please test the following patch (first remove the initial patch
>> attempt)?
>
>
> [    0.850000] switch0: Atheros AR833X rev. 2 switch registered on
> ag71xx-mdio.0
> [    0.860000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: led_val = 3f
> [    0.860000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Detected
> AR8337
>
> It seems that we have no luck here...
> In case you have any new idea I'll test the patch.

Here's some general info about the QCA8334 chip that might help. If
you have specific questions let me know and I will try to find
answers.

The four ports of the Gigabit switch engine are:
Port 0 GMAC: RGMII/MII/RMII
Port 2 and 3 GMAC: 2 *10/100/1000BASE-T
Port 6 GMAC: SerDes/SGMII

It can be configured using serial EEPROM and/or the MDC/MDIO interface.

kg
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel