[OpenWrt-Devel] [PATCH 10/10] brcmfmac: Add support for multiple PCIE devices in nvram.

[Arend van Spriel]

On 04/20/15 13:26, Rafał Miłecki wrote:
> On 17 April 2015 at 10:50, Arend van Spriel<arend at broadcom.com>  wrote:
>> On 04/17/15 09:45, Rafał Miłecki wrote:
>>>
>>> Huh, why dropping linux-wireless (and top posting btw)? Please let
>>> everyone follow the discussion :)
>>>
>>> On 15 April 2015 at 21:20, Hante Meuleman<meuleman at broadcom.com>   wrote:
>>>>
>>>> As I wrote to you in a mail and on the openwrt forum, this patch is
>>>> indeed an attempt to support more complex nvram files. I also wrote, that in
>>>> order to be able to use it, the nvram contents of the device (r8000) needs
>>>> to be put a specific file. Now for your concerns, we can perhaps add
>>>> something which will read the nvram contents directly from an nvram store.
>>>> But that is irrelevant to this patch. The parsing is still needed, and all
>>>> we would need to add is something which is reading the nvram contents from
>>>> some other place
>>>
>>>
>>> So it makes me wonder if we need this patch in its current form. I
>>> think getting NVRAM directly from the platform is much user friendly.
>>> It doesn't require user to install some extra tools for dumping NVRAM
>>> and putting it in a specific file. One extra layer less.
>>> With that said I think it's hard to review your code for parsing
>>> NVRAM. We don't know how it's going to be fetched in the first place.
>>
>> You already made that point and we agreed to look for a solution.
>
> OK, it wasn't supposed to be rude or anything :) Thanks.

No problem. Just wanted to make sure we are moving forward.

>>>> though it would have to be put under some kernel config flag as this
>>>> would not be supported in non-router systems. The contents of the nvram
>>>> would however still need to be parsed in exactly the same way as the nvram
>>>> files we read from disk.
>>>
>>>
>>> Again, it's hard to say for me. Are you going to use
>>> bcm47xx_nvram_getenv? Are you going to use MTD subsystem? Are you
>>> going to develop different solution? When using e.g.
>>> bcm47xx_nvram_getenv you won't want all this parsing stuff at all.
>>
>>
>> Please look at the usage scenario here. The brcmfmac driver is not needing a
>> few key,value pairs. It needs a portion of NVRAM to download to the device.
>> The patch provides the functionality to do just that. Get the appropriate
>> portion, strip comments and whitespace, and send it to the device. Using
>> bcm47xx_nvram_getenv is not a useful api as it would mean we need brcmfmac
>> to know which key ids to ask for, reassemble it to key=value string and send
>> it to the fullmac device.
>>
>> In bcm47xx_nvram_getenv() it does have the whole nvram content available in
>> nvram_buf which is filled by nvram_init(). So if something similar is made
>> available on r8000 (or ARM routers in general) build target all we need is
>> an api to get the nvram_buf.
>>
>> Another option is to add the parsing stuff in that nvram code and have an
>> api to get the appropriate portion based on pcie domain and bus number as
>> used in brcmf_fw_get_firmwares_pcie(). However, I would prefer to have this
>> in the driver and not in arch specific code as there may be other platforms
>> like our set-top boxes needing this.
>
> This is some plan for the future I was lacking from the beginning. It
> makes things more clear now, thanks.

You're welcome. Do you want to see this clarification in the commit message?

Regards,
Arend
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel