[OpenWrt-Devel] Question about broadcom image under openwrt.

[Tymon]

I ported bcm958522er (ARM Crotex A9, dual core) on openwrt successfully, used kernel 2.6.36 rather than 3.3.8,

But I suffered from a strange problem on the booting--the vmlinux.lzma with "boot_vmlinuz" u-boot command work fine while the openwrt-xxx-squashfs.trx hanged at the beginning. why ?




  the image is made by below command:

   trx -o openwrt-xxx.trx -f vmlinux.lzma -a 1024 -f root.squashfs

 

here shows the log information:

   "Uncompressing the kernel ,... done,  booting the kernel..."



   .....and then the board hanged at here.




  Any hints will be appreciated, thanks.











------------------
Regards,

banglang huang
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150410/15a2cfa0/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel