[OpenWrt-Devel] [PATCH 1/2] base-files: add support for platform_pre_upgrade function

[Rafał Miłecki]

Current NAND sysupgrade process is a bit hard to follow due to the way
of triggering stage1. Currently this is done by leaving a /mark/ in the
form of /tmp/sysupgrade-nand-path during nand_do_platform_check.
Existence of this mark stops standard sysupgrade process (as the result
of sysupgrade_pre_upgrade exit). This may be a bit misleading.

Proposed solution adds a new function that will allow platform.sh
trigger NAND sysupgrade consciously. This will also allow cleaning
nand_do_platform_check limiting it to just checking the image.

Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
 package/base-files/files/sbin/sysupgrade | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/package/base-files/files/sbin/sysupgrade b/package/base-files/files/sbin/sysupgrade
index 215f482..ef83c4b 100755
--- a/package/base-files/files/sbin/sysupgrade
+++ b/package/base-files/files/sbin/sysupgrade
@@ -215,6 +215,14 @@ fi
 
 run_hooks "" $sysupgrade_pre_upgrade
 
+# Some platforms/devices may want different sysupgrade process, e.g. without
+# killing processes yet or calling ubus system upgrade method.
+# This is needed e.g. on NAND devices where we just want to trigger stage1 at
+# this point.
+if type 'platform_pre_upgrade' >/dev/null 2>/dev/null; then
+	platform_pre_upgrade "$ARGV"
+fi
+
 ubus call system upgrade
 touch /tmp/sysupgrade
 
-- 
1.8.4.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel