[OpenWrt-Devel] [PATCH] ramips:Add support for MakerModule MicroWRT
郭传鈜
gch981213 at gmail.com
Mon Apr 6 04:33:32 EDT 2015
Sorry please don't accept the v2 patch because Sheng Kai told me that the
flash layout in his patch is totally wrong :-(
2015-04-06 14:53 GMT+08:00 John Crispin <blogic at openwrt.org>:
> Hi,
>
> comments inline
>
> On 06/04/2015 02:15, 郭传鈜 wrote:
> > First of all,this patch is not created by me.I just help him to send
> this patch:-D
> >
> > MicroWRT is an wireless router with 2 USB,1 ethernet port. It
> > has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
> > i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
> > combine with the core board. The detailed information, please refer to
> > https://www.microduino.cc/wiki/index.php?title=Main_Page
> >
> > This patch adds support for it.
> > Because there is only one port,so disabled VLAN and use eth0 as lan
> > port. and only a power LED control by power pin.
> > Signed-off-by: 盛凯 <shengkai81 at gmail.com>
> > ---
> > .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> > target/linux/ramips/base-files/lib/ramips.sh | 3 +
> > .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> > target/linux/ramips/dts/MicroWRT.dts | 107
> +++++++++++++++++++++
> > target/linux/ramips/image/Makefile | 2 +
> > target/linux/ramips/mt7620/profiles/microwrt.mk | 12 +++
> > 6 files changed, 126 insertions(+)
> > create mode 100644 target/linux/ramips/dts/MicroWRT.dts
> > create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk
> >
> > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> > index d4ec19d..2035ab0 100755
> > --- a/target/linux/ramips/base-files/etc/board.d/02_network
> > +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> > @@ -45,6 +45,7 @@ ramips_setup_interfaces()
> >
> > 3g150b | \
> > 3g300m | \
> > + microwrt | \
>
> there is a space here
>
> > w150m | \
> > zte-q7 | \
> > all0256n | \
> > diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> > index fc6eb37..d115b4f 100755
> > --- a/target/linux/ramips/base-files/lib/ramips.sh
> > +++ b/target/linux/ramips/base-files/lib/ramips.sh
> > @@ -202,6 +202,9 @@ ramips_board_detect() {
> > *"Planex MZK-750DHP")
> > name="mzk-750dhp"
> > ;;
> > + *"MakerModule MicroWRT")
> > + name="microwrt"
> > + ;;
>
> spaces here aswell, use tabs please
>
>
> > *"NBG-419N")
> > name="nbg-419n"
> > ;;
> > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > index a5773b5..57a339e 100755
> > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > @@ -60,6 +60,7 @@ platform_check_image() {
> > m2m | \
> > m3 | \
> > m4 | \
> > + microwrt | \
>
> spaces here aswell, use tabs please
>
> the rest looks good.
>
> John
>
>
> > mlw221 | \
> > mlwg2 | \
> > mofi3500-3gn | \
> > diff --git a/target/linux/ramips/dts/MicroWRT.dts
> b/target/linux/ramips/dts/MicroWRT.dts
> > new file mode 100644
> > index 0000000..8088ccb
> > --- /dev/null
> > +++ b/target/linux/ramips/dts/MicroWRT.dts
> > @@ -0,0 +1,107 @@
> > +/dts-v1/;
> > +
> > +/include/ "mt7620a.dtsi"
> > +
> > +/ {
> > + compatible = "microwrt", "ralink,mt7620a-soc";
> > + model = "MakerModule MicroWRT";
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200";
> > + };
> > +
> > + palmbus at 10000000 {
> > + gpio2: gpio at 660 {
> > + status = "okay";
> > + };
> > +
> > + gpio3: gpio at 688 {
> > + status = "okay";
> > + };
> > +
> > + spi at b00 {
> > + status = "okay";
> > +
> > + m25p80 at 0 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "w25q128";
> > + reg = <0 0>;
> > + linux,modalias = "m25p80", "w25q128";
> > + spi-max-frequency = <10000000>;
> > +
> > + partition at 0 {
> > + label = "u-boot";
> > + reg = <0x0 0x30000>;
> > + read-only;
> > + };
> > +
> > + partition at 30000 {
> > + label = "u-boot-env";
> > + reg = <0x30000 0x10000>;
> > + read-only;
> > + };
> > +
> > + factory: partition at 40000 {
> > + label = "factory";
> > + reg = <0x40000 0x10000>;
> > + read-only;
> > + };
> > +
> > + partition at 50000 {
> > + label = "firmware";
> > + reg = <0x50000 0xfb0000>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + ehci at 101c0000 {
> > + status = "okay";
> > + };
> > +
> > + ohci at 101c1000 {
> > + status = "okay";
> > + };
> > +
> > + pcie at 10140000 {
> > + status = "okay";
> > + };
> > +
> > + ethernet at 10100000 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&ephy_pins>;
> > + mtd-mac-address = <&factory 0x4>;
> > + ralink,port-map = "llllw";
> > + };
> > +
> > + wmac at 10180000 {
> > + ralink,mtd-eeprom = <&factory 0>;
> > + };
> > +
> > + pinctrl {
> > + state_default: pinctrl0 {
> > + default {
> > + ralink,group = "wled", "i2c", "wdt",
> "uartf";
> > + ralink,function = "gpio";
> > + };
> > + };
> > + };
> > +
> > + gpio-keys-polled {
> > + compatible = "gpio-keys-polled";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + poll-interval = <20>;
> > + reset {
> > + label = "reset";
> > + gpios = <&gpio0 1 1>;
> > + linux,code = <0x198>;
> > + };
> > + wps {
> > + label = "wps";
> > + gpios = <&gpio0 2 1>;
> > + linux,code = <0x211>;
> > + };
> > + };
> > + };
> > diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> > index 743f7b4..30d9743 100644
> > --- a/target/linux/ramips/image/Makefile
> > +++ b/target/linux/ramips/image/Makefile
> > @@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call
> BuildFirmware/Default16M/$(1),$(1)
> > Image/Build/Profile/ZTE-Q7=$(call
> BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
> > Image/Build/Profile/ZBT-WA05=$(call
> BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
> > Image/Build/Profile/ArcherC20i=$(call
> BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
> > +Image/Build/Profile/MicroWRT=$(call
> BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT)
> >
> >
> > ifeq ($(SUBTARGET),mt7620)
> > @@ -895,6 +896,7 @@ define Image/Build/Profile/Default
> > $(call Image/Build/Profile/ZTE-Q7,$(1))
> > $(call Image/Build/Profile/ZBT-WA05,$(1))
> > $(call Image/Build/Profile/ArcherC20i,$(1))
> > + $(call Image/Build/Profile/MicroWRT,$(1))
> > endef
> > endif
> >
> > diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk
> b/target/linux/ramips/mt7620/profiles/microwrt.mk
> > new file mode 100644
> > index 0000000..e1e944b
> > --- /dev/null
> > +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk
> > @@ -0,0 +1,11 @@
> > + define Profile/MicroWRT
> > + NAME:=MakerModule MicroWRT
> > + PACKAGES:=\
> > + kmod-usb-core kmod-usb2 kmod-usb-ohci
> > + endef
> > +
> > + define Profile/MicroWRT/Description
> > + Support for MicroWRT
> > + endef
> > + $(eval $(call Profile,MicroWRT))
> > +
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150406/76f65df9/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list