[OpenWrt-Devel] [PATCH] ramips:Add support for MakerModule MicroWRT
郭传鈜
gch981213 at gmail.com
Sun Apr 5 21:24:23 EDT 2015
The title of the old patch is not started with [PATCH] so it is not
recognized as a patch in the patchwork:-)
2015-04-06 9:09 GMT+08:00 L. D. Pinney <ldpinney at gmail.com>:
> Also...
>
> You should have accounts on :
> https://patchwork.ozlabs.org/
>
> Then Jason can mark the old patch superseded.
>
> Larry
>
>
> On Sun, Apr 5, 2015 at 7:30 PM, L. D. Pinney <ldpinney at gmail.com> wrote:
>
>>
>> Hi :
>>
>> This one looks much better :)
>>
>> Larry
>>
>> On Sun, Apr 5, 2015 at 7:15 PM, 郭传鈜 <gch981213 at gmail.com> wrote:
>>
>>> First of all,this patch is not created by me.I just help him to send
>>> this patch:-D
>>>
>>> MicroWRT is an wireless router with 2 USB,1 ethernet port. It
>>> has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
>>> i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
>>> combine with the core board. The detailed information, please refer to
>>> https://www.microduino.cc/wiki/index.php?title=Main_Page
>>>
>>> This patch adds support for it.
>>> Because there is only one port,so disabled VLAN and use eth0 as lan
>>> port. and only a power LED control by power pin.
>>> Signed-off-by: 盛凯 <shengkai81 at gmail.com>
>>> ---
>>> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
>>> target/linux/ramips/base-files/lib/ramips.sh | 3 +
>>> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
>>> target/linux/ramips/dts/MicroWRT.dts | 107
>>> +++++++++++++++++++++
>>> target/linux/ramips/image/Makefile | 2 +
>>> target/linux/ramips/mt7620/profiles/microwrt.mk | 12 +++
>>> 6 files changed, 126 insertions(+)
>>> create mode 100644 target/linux/ramips/dts/MicroWRT.dts
>>> create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk
>>>
>>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>>> b/target/linux/ramips/base-files/etc/board.d/02_network
>>> index d4ec19d..2035ab0 100755
>>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>>> @@ -45,6 +45,7 @@ ramips_setup_interfaces()
>>>
>>> 3g150b | \
>>> 3g300m | \
>>> + microwrt | \
>>> w150m | \
>>> zte-q7 | \
>>> all0256n | \
>>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>>> b/target/linux/ramips/base-files/lib/ramips.sh
>>> index fc6eb37..d115b4f 100755
>>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>>> @@ -202,6 +202,9 @@ ramips_board_detect() {
>>> *"Planex MZK-750DHP")
>>> name="mzk-750dhp"
>>> ;;
>>> + *"MakerModule MicroWRT")
>>> + name="microwrt"
>>> + ;;
>>> *"NBG-419N")
>>> name="nbg-419n"
>>> ;;
>>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> index a5773b5..57a339e 100755
>>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>>> @@ -60,6 +60,7 @@ platform_check_image() {
>>> m2m | \
>>> m3 | \
>>> m4 | \
>>> + microwrt | \
>>> mlw221 | \
>>> mlwg2 | \
>>> mofi3500-3gn | \
>>> diff --git a/target/linux/ramips/dts/MicroWRT.dts
>>> b/target/linux/ramips/dts/MicroWRT.dts
>>> new file mode 100644
>>> index 0000000..8088ccb
>>> --- /dev/null
>>> +++ b/target/linux/ramips/dts/MicroWRT.dts
>>> @@ -0,0 +1,107 @@
>>> +/dts-v1/;
>>> +
>>> +/include/ "mt7620a.dtsi"
>>> +
>>> +/ {
>>> + compatible = "microwrt", "ralink,mt7620a-soc";
>>> + model = "MakerModule MicroWRT";
>>> +
>>> + chosen {
>>> + bootargs = "console=ttyS0,115200";
>>> + };
>>> +
>>> + palmbus at 10000000 {
>>> + gpio2: gpio at 660 {
>>> + status = "okay";
>>> + };
>>> +
>>> + gpio3: gpio at 688 {
>>> + status = "okay";
>>> + };
>>> +
>>> + spi at b00 {
>>> + status = "okay";
>>> +
>>> + m25p80 at 0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "w25q128";
>>> + reg = <0 0>;
>>> + linux,modalias = "m25p80", "w25q128";
>>> + spi-max-frequency = <10000000>;
>>> +
>>> + partition at 0 {
>>> + label = "u-boot";
>>> + reg = <0x0 0x30000>;
>>> + read-only;
>>> + };
>>> +
>>> + partition at 30000 {
>>> + label = "u-boot-env";
>>> + reg = <0x30000 0x10000>;
>>> + read-only;
>>> + };
>>> +
>>> + factory: partition at 40000 {
>>> + label = "factory";
>>> + reg = <0x40000 0x10000>;
>>> + read-only;
>>> + };
>>> +
>>> + partition at 50000 {
>>> + label = "firmware";
>>> + reg = <0x50000 0xfb0000>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> + ehci at 101c0000 {
>>> + status = "okay";
>>> + };
>>> +
>>> + ohci at 101c1000 {
>>> + status = "okay";
>>> + };
>>> +
>>> + pcie at 10140000 {
>>> + status = "okay";
>>> + };
>>> +
>>> + ethernet at 10100000 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&ephy_pins>;
>>> + mtd-mac-address = <&factory 0x4>;
>>> + ralink,port-map = "llllw";
>>> + };
>>> +
>>> + wmac at 10180000 {
>>> + ralink,mtd-eeprom = <&factory 0>;
>>> + };
>>> +
>>> + pinctrl {
>>> + state_default: pinctrl0 {
>>> + default {
>>> + ralink,group = "wled", "i2c", "wdt",
>>> "uartf";
>>> + ralink,function = "gpio";
>>> + };
>>> + };
>>> + };
>>> +
>>> + gpio-keys-polled {
>>> + compatible = "gpio-keys-polled";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + poll-interval = <20>;
>>> + reset {
>>> + label = "reset";
>>> + gpios = <&gpio0 1 1>;
>>> + linux,code = <0x198>;
>>> + };
>>> + wps {
>>> + label = "wps";
>>> + gpios = <&gpio0 2 1>;
>>> + linux,code = <0x211>;
>>> + };
>>> + };
>>> + };
>>> diff --git a/target/linux/ramips/image/Makefile
>>> b/target/linux/ramips/image/Makefile
>>> index 743f7b4..30d9743 100644
>>> --- a/target/linux/ramips/image/Makefile
>>> +++ b/target/linux/ramips/image/Makefile
>>> @@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call
>>> BuildFirmware/Default16M/$(1),$(1)
>>> Image/Build/Profile/ZTE-Q7=$(call
>>> BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
>>> Image/Build/Profile/ZBT-WA05=$(call
>>> BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
>>> Image/Build/Profile/ArcherC20i=$(call
>>> BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
>>> +Image/Build/Profile/MicroWRT=$(call
>>> BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT)
>>>
>>>
>>> ifeq ($(SUBTARGET),mt7620)
>>> @@ -895,6 +896,7 @@ define Image/Build/Profile/Default
>>> $(call Image/Build/Profile/ZTE-Q7,$(1))
>>> $(call Image/Build/Profile/ZBT-WA05,$(1))
>>> $(call Image/Build/Profile/ArcherC20i,$(1))
>>> + $(call Image/Build/Profile/MicroWRT,$(1))
>>> endef
>>> endif
>>>
>>> diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk
>>> b/target/linux/ramips/mt7620/profiles/microwrt.mk
>>> new file mode 100644
>>> index 0000000..e1e944b
>>> --- /dev/null
>>> +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk
>>> @@ -0,0 +1,11 @@
>>> + define Profile/MicroWRT
>>> + NAME:=MakerModule MicroWRT
>>> + PACKAGES:=\
>>> + kmod-usb-core kmod-usb2 kmod-usb-ohci
>>> + endef
>>> +
>>> + define Profile/MicroWRT/Description
>>> + Support for MicroWRT
>>> + endef
>>> + $(eval $(call Profile,MicroWRT))
>>> +
>>> --
>>> 2.1.0
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150406/e94e7c42/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list