[OpenWrt-Devel] [PATCH 1/2] [packages] add support for Huawei NCM modems (openwrt-devel Digest, Vol 111, Issue 138)

[Matti Laakso]

> On 28-03-2015 17:43, Cezary Jackiewicz wrote:
> > Why you do that? ncm from gcom-ncm is enough, you do not have to do 
> > specifically the new protocol. Just set /dev/cdc-wdm0 as device. Tested
> > with E3131 in huawei/ncm mode.
>
> Well, i saw that code, but found it to be quite slow and unreliable with
> my modems. It blocked regularly, and the connection was not
> reinitialized when it dropped. I should probably test it again with the
> 3.18 kernel and add code specific to the modems i own.
>
>
> Maarten Deprez

Did you try it with the changes from r44628...r44631?

Matti
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel