[OpenWrt-Devel] [PATCHv2] Add support for DHT11 driver

[harald at ccbib.org]

The DHT11 is a temperature and humidity sensor supported by linux
since 3.14.

This patch is tested on recent mxs with kernel 3.14.18.

Signed-off-by: Harald Geyer <harald at ccbib.org>
---
Changes since last version:
    Add dependency on devicetree

 package/kernel/linux/modules/other.mk |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/package/kernel/linux/modules/other.mk
b/package/kernel/linux/modules/other.mk
index d56bb50..38e6628 100644
--- a/package/kernel/linux/modules/other.mk
+++ b/package/kernel/linux/modules/other.mk
@@ -258,6 +258,26 @@ endef
 
 $(eval $(call KernelPackage,iio-ad799x))
 
+
+define KernelPackage/iio-dht11
+  SUBMENU:=$(OTHER_MENU)
+  DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
+  TITLE:=DHT11 (and compatible) humidity and temperature sensors
+  KCONFIG:= \
+	CONFIG_DHT11
+  FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
+  AUTOLOAD:=$(call AutoLoad,56,dht11)
+endef
+
+define KernelPackage/iio-dht11/description
+ support for DHT11 and DHT22 digitial humidity and temperature sensors
+ attached at GPIO lines. You will need a custom device tree file to
+ specify the GPIO line to use.
+endef
+
+$(eval $(call KernelPackage,iio-dht11))
+
+
 define KernelPackage/lp
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Parallel port and line printer support
-- 
1.7.2.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel