[OpenWrt-Devel] b53: BCM5325 VLAN VID > 15 possible?

[Weedy]

On 29 Sep 2014 05:19, "Jonas Gorski" <jogo at openwrt.org> wrote:
>
> Hi,
>
> On Mon, Sep 29, 2014 at 10:43 AM, Ilya Lipnitskiy
> <ilya.lipnitskiy at gmail.com> wrote:
> > Greetings!
> >
> > I have been trying to configure a NETGEAR WNDR3400 device to use VLAN
ID 201
> > on its WAN port to be able to talk to a Calix FTTH ONT. Studying the
> > problem, I have found that the device contains a BCM5325 switch, which
only
> > supports up to 16 VLAN entries. However, each entry may have a VID that
is
> > 12 bits long, ie 0-4095.
> >
> > It does not seem that the current b53 driver supports this:
> >
> > From b53_common.c:
> > static int b53_port_set_pvid(struct switch_dev *dev, int port, int val)
> > {
> > ...
> >         if (val > 15 && is5325(priv))
> >                 return -EINVAL;
> > ...
> >
> >
> > I don't think this is hardware limitation, as people seem to have
gotten it

This is why you don't buy broadcom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140930/2096156d/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel