[OpenWrt-Devel] [PATCH] ramips: add support for Nexx WT1520
Roger Pueyo Centelles
rogerpueyo at gmail.com
Mon Sep 15 11:40:26 EDT 2014
This patch adds support for Nexx WT1520 devices.
Signed-off-by: Roger Pueyo Centelles <openwrt at rogerpueyo.com>
---
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 01e2363..1806ff2 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -112,6 +112,9 @@ case $board in
hlk-rm04)
set_wifi_led "rt2800pci-phy0::radio"
;;
+ nexx-wt1520)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
all0239-3g|\
hw550-3g)
set_usb_led "hw550-3g:green:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index e027b3b..765d398 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -103,6 +103,7 @@ ramips_setup_interfaces()
dir-320-b1 | \
dir-615-h1 | \
hlk-rm04 | \
+ nexx-wt1520 | \
mzk-w300nh2 | \
mzk-750dhp)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index 9ad7ccb..472da4b 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -63,6 +63,9 @@ get_status_led() {
hlk-rm04)
status_led="hlk-rm04:red:power"
;;
+ nexx-wt1520)
+ status_led="nexx-wt1520:white:power"
+ ;;
all0239-3g|\
hw550-3g)
status_led="hw550-3g:green:status"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index bb42ace..0a09225 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -157,6 +157,9 @@ ramips_board_detect() {
*"HILINK HLK-RM04")
name="hlk-rm04"
;;
+ *"Nexx WT1520")
+ name="nexx-wt1520"
+ ;;
*"HAME MPR-A1")
name="mpr-a1"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 407c218..8ff2da6 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -52,6 +52,7 @@ platform_check_image() {
hw550-3g | \
hg255d | \
hlk-rm04 | \
+ nexx-wt1520 | \
ip2202 | \
m3 | \
m4 | \
diff --git a/target/linux/ramips/dts/NEXXWT1520.dts
b/target/linux/ramips/dts/NEXXWT1520.dts
new file mode 100644
index 0000000..c89bea1
--- /dev/null
+++ b/target/linux/ramips/dts/NEXXWT1520.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "NEXXWT1520", "ralink,rt5350-soc";
+ model = "Nexx WT1520";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+
+ palmbus at 10000000 {
+ uart at 500 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q32";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "nexx-wt1520:white:power";
+ gpios = <&gpio0 0 1>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+ usb-mode {
+ gpio-export,name = "usb-mode";
+ gpio-export,output = <0>;
+ gpios = <&gpio0 18 0>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index 35057e4..6f7c51c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -434,6 +434,14 @@ define BuildFirmware/HLKRM04/initramfs
endef
Image/Build/Profile/HLKRM04=$(call
BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
+BuildFirmware/NEXXWT1520/squashfs=$(call
BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4))
+define BuildFirmware/NEXXWT1520/initramfs
+ $(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+ #mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call
imgname,$(1),$(2))-factory.bin;
+endef
+
+Image/Build/Profile/NEXXWT1520=$(call
BuildFirmware/NEXXWT1520/$(1),$(1),nexx-wt1520,NEXXWT1520,NEXXWT1520)
+
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
@@ -598,6 +606,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HLKRM04,$(1))
+ $(call Image/Build/Profile/NEXXWT1520,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/IP2202,$(1))
$(call Image/Build/Profile/M3,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/nexx.mk
b/target/linux/ramips/rt305x/profiles/nexx.mk
new file mode 100644
index 0000000..45d81ec
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/nexx.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NEXXWT1520
+ NAME:=Nexx WT1520
+ PACKAGES:=kmod-usb2
+endef
+
+define Profile/NEXXWT1520/Description
+ Package set for NEXXWT1520
+endef
+
+$(eval $(call Profile,NEXXWT1520))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list