[OpenWrt-Devel] jffs takes about 18 minutes to get ready on 3.10 kernel

[Claudio Thomas]

Hi,
compiling/installing the same sources+config, but with 3.8 kernel all is
fine...
But when compilng with 3.10 the jffs takes about 18 minutes to get ready:
[     2.655217] Freeing unused kernel memory: 160K (c045f000 - c0487000)
procd: Console is alive
procd: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
jffs2 is ready
jffs2 is ready
[  800.742671] jffs2: notice: (888) jffs2_build_xattr_subsystem:
complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan)
and 12 of xref (0 dead, 2 orphan) found.
switching to overlay
procd: - early -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 1083.939598] usb 1-1: new high-speed USB device number 2 using fsl-ehci

Anyone an idea what could be wrong or how I can get more informations
what the board is doing this whole time to fix it?
Pressing 1,2,3 or 4 does not give any infos during this time.
Thanks,
Claudio

-- 
Working on OpenWrt BB for Xmodus Systems XM1700E
<http://www.xmodus-systems.de/en/terminals/routers.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20141029/12f6e38d/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel