[OpenWrt-Devel] [PATCH 09/10] lantiq - vgv7519: enable pci bus
Eddi De Pieri
eddi at depieri.net
Mon Oct 6 11:11:14 EDT 2014
Signed-off-by: Eddi De Pieri <eddi at depieri.net>
---
target/linux/lantiq/dts/VGV7519.dtsi | 5 +++--
target/linux/lantiq/xrx200/config-3.14 | 2 +-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/target/linux/lantiq/dts/VGV7519.dtsi
b/target/linux/lantiq/dts/VGV7519.dtsi
index fafcf5e..d652839 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -188,10 +188,11 @@
};
pci at E105400 {
+ status = "okay";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- compatible = "lantiq,pci-xway1";
+ compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0
0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0
0x200000>; /* io space */
@@ -205,7 +206,7 @@
interrupt-map = <
0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
>;
- gpios-reset = <&gpio 21 0>;
+ gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
diff --git a/target/linux/lantiq/xrx200/config-3.14
b/target/linux/lantiq/xrx200/config-3.14
index 959bf6a..3d525a4 100644
--- a/target/linux/lantiq/xrx200/config-3.14
+++ b/target/linux/lantiq/xrx200/config-3.14
@@ -44,7 +44,7 @@ CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_NLS=y
CONFIG_PCIE_LANTIQ=y
-# CONFIG_PCI_LANTIQ is not set
+CONFIG_PCI_LANTIQ=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RTL8306_PHY=y
--
1.7.10.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list