[OpenWrt-Devel] [PATCH] package/kernel: Standardize help info in Config.in files
Robert P. J. Day
rpjday at crashcourse.ca
Sun Oct 5 06:47:21 EDT 2014
Use standard format (tab + 2 spaces) for help info, and a couple cheap
grammar fixes.
Signed-off-by: Robert P. J. Day <rpjday at crashcourse.ca>
---
diff --git a/package/kernel/ar7-atm/Config.in b/package/kernel/ar7-atm/Config.in
index 479b7ad..17a2701 100644
--- a/package/kernel/ar7-atm/Config.in
+++ b/package/kernel/ar7-atm/Config.in
@@ -5,8 +5,8 @@ choice
prompt "Firmware version"
default AR7_ATM_FW_VERSION_704
help
- This option allows you to switch between firmware/driver versions which
- might improve the DSL line speed.
+ This option allows you to switch between firmware/driver versions which
+ might improve the DSL line speed.
config AR7_ATM_FW_VERSION_705
bool "D7.05.01.00"
diff --git a/package/kernel/lantiq/ltq-tapi/Config.in b/package/kernel/lantiq/ltq-tapi/Config.in
index 84dbef2..44bff26 100644
--- a/package/kernel/lantiq/ltq-tapi/Config.in
+++ b/package/kernel/lantiq/ltq-tapi/Config.in
@@ -3,86 +3,86 @@ config VOICE_CPE_TAPI_FAX
depends on PACKAGE_kmod-ltq-tapi
default n
help
- Option to enable fax/modem support in TAPI.
- Note: Newer platforms as AR9 and VR9 support a T.38 fax relay stack
- in FW while older platforms like Danube or VINETIC-CPE require a
- separate SW stack executed as an application.
+ Option to enable fax/modem support in TAPI. Note: Newer platforms
+ such as AR9 and VR9 support a T.38 fax relay stack in FW while
+ older platforms like Danube or VINETIC-CPE require a separate SW stack
+ executed as an application.
config VOICE_CPE_TAPI_CID
bool "CID support"
depends on PACKAGE_kmod-ltq-tapi
default y
help
- Option to enable Caller ID support.
+ Option to enable Caller ID support.
config VOICE_CPE_TAPI_LT_GR909
bool "Linetesting GR-909 support"
depends on PACKAGE_kmod-ltq-tapi
default y
- help
- Option to enable linetesting GR-909.
+ help
+ Option to enable linetesting GR-909.
config VOICE_CPE_TAPI_DECT
bool "DECT encoding for COSIC modem"
depends on PACKAGE_kmod-ltq-tapi
default n
- help
- Option to enable DECT encoding for COSIC modem.
+ help
+ Option to enable DECT encoding for COSIC modem.
config VOICE_CPE_TAPI_KPI
bool "KPI (Kernel Packet Interface)"
depends on PACKAGE_kmod-ltq-tapi
default y
help
- Option to enable the generic kernel level packet interface
- which allows accelerated packet transfer for various purposes.
- The most important example is the QOS option, which allows
- to redirect RTP packets directly into the IP stack.
- Other options relying on KPI are DECT and HDLC.
+ Option to enable the generic kernel level packet interface
+ which allows accelerated packet transfer for various purposes.
+ The most important example is the QOS option, which allows
+ the redirection of RTP packets directly into the IP stack.
+ Other options relying on KPI are DECT and HDLC.
config VOICE_CPE_TAPI_QOS
bool "QOS for accelerated RTP packet handling"
depends on PACKAGE_kmod-ltq-tapi
default y
help
- Option to enable an accelerated RTP packet transfer inside
- the LINUX kernel space. This option requires the KPI2UDP
- packet, which actually provides the OS specific hooks in
- the IP stack.
+ Option to enable an accelerated RTP packet transfer inside
+ the LINUX kernel space. This option requires the KPI2UDP
+ packet, which actually provides the OS specific hooks in
+ the IP stack.
config VOICE_CPE_TAPI_STATISTICS
bool "TAPI statistics via /proc fs"
depends on PACKAGE_kmod-ltq-tapi
default y
help
- Option to enable /proc fs statistics for packet counts etc.
+ Option to enable /proc fs statistics for packet counts etc.
config VOICE_CPE_TAPI_METERING
bool "Metering (TTX) support"
depends on PACKAGE_kmod-ltq-tapi
default n
help
- Option to enable metering (TTX) support.
+ Option to enable metering (TTX) support.
config VOICE_CPE_TAPI_HDLC
bool "PCM HDLC support, evaluation"
depends on PACKAGE_kmod-ltq-tapi
default n
help
- Option to enable PCM HDLC framing inside the firmware, e.g. for
- ISDN D-Channel access.
+ Option to enable PCM HDLC framing inside the firmware, e.g. for
+ ISDN D-Channel access.
config VOICE_CPE_TAPI_TRACES
bool "enable driver traces"
depends on PACKAGE_kmod-ltq-tapi
default y
help
- enable driver traces with different trace levels to be
- configured dynamically from the application or during insmod
+ Enable driver traces with different trace levels to be
+ configured dynamically from the application or during insmod.
config VOICE_CPE_TAPI_LINUX_HOTPLUG
bool "enable driver Linux hotplug events"
depends on PACKAGE_kmod-ltq-tapi
default y
help
- enable driver Linux hotplug events generation
+ Enable driver Linux hotplug events generation.
diff --git a/package/kernel/lantiq/ltq-vmmc/Config.in b/package/kernel/lantiq/ltq-vmmc/Config.in
index 89e1bc5..a94813f 100644
--- a/package/kernel/lantiq/ltq-vmmc/Config.in
+++ b/package/kernel/lantiq/ltq-vmmc/Config.in
@@ -3,7 +3,7 @@ choice
depends on PACKAGE_kmod-ltq-vmmc
default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
help
- Select the target device.
+ Select the target device.
config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
bool "Danube, Twinpass, Vinax"
@@ -28,7 +28,7 @@ choice
prompt "FXS coefficients"
default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
help
- Select country specific FXS coefficient file.
+ Select country specific FXS coefficient file.
config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz"
@@ -65,14 +65,14 @@ config VOICE_CPE_VMMC_PMC
bool "Power Management Control support"
default n
help
- Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
+ Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
bool "Disable DECT nibble swap"
depends on PACKAGE_kmod-ltq-vmmc
default n
help
- Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
+ Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
config VOICE_CPE_VMMC_EVENT_LOGGER
depends on BROKEN
@@ -80,16 +80,16 @@ config VOICE_CPE_VMMC_EVENT_LOGGER
depends on PACKAGE_kmod-ltq-vmmc
default n
help
- Option to enable details traces between drv_vmmc and the voice FW
- - for debugging only
- - requires package ifx-evtlog
+ Option to enable details traces between drv_vmmc and the voice FW
+ - for debugging only
+ - requires package ifx-evtlog
config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
int "MPS history buffer in words (0<=size<=512)"
depends on PACKAGE_kmod-ltq-vmmc
default "128"
help
- MPS history buffer (default=128 words, maximum=512 words, 0=disable)
- To opimize the memory footprint in RAM, you might want to set the
- buffer size to 0.
+ MPS history buffer (default=128 words, maximum=512 words, 0=disable)
+ To opimize the memory footprint in RAM, you might want to set the
+ buffer size to 0.
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list