[OpenWrt-Devel] [PATCH 3/5] add new target 'oxnas'

[Daniel Golle]

Hi John,

On Wed, Nov 26, 2014 at 08:14:18AM +0100, John Crispin wrote:
> seems to all be functional. one last question ...
I found yet another small thing to fix ehci which I recently broke.
It also seems like xhci support doesn't work on 3.18 yet. Most boards,
(except for kd20) don't come with USB 3, so this is something I can fix
later on and once xhci is confirmed to work on other platforms on 3.18.

> you use oxnas everywhere apart from the string that the user sees in
> menuconfig. i had to look twice to find the right target option in
> menuconfig as i was looking for Oxna dna not plxtech
Hm, right, that might be confusing.
The mach name 'oxnas' wasn't changed despite the frequent changes in
marketing names of the SoC, similar to sunxi or xburst which are also
marketed with different names today...
I guess the best would be to change the board name 'PLXTECH NAS782X' to
'Oxford OX82x / PLXTECH NAS782x' (or the other way around, so to have the
currently still used marketing name followed by historic names)

I'll post a patch doing that and fixing EHCI in sec.


Cheers


Daniel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel