[OpenWrt-Devel] [PATCH][RFC] mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)

[SGT. Garcia]

On Nov 12  09:11 +0100, Rafał Miłecki wrote:
> Some devices like Netgear WNR1000v3 or WGR614v10 have partitions aligned
> to 0x1000. Using bigger blocksize stopped us from detecting some parts.
> 
> Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>

is this related:

6 bcm47xxpart partitions found on MTD device bcm47xxsflash
Creating 6 MTD partitions on "bcm47xxsflash":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x0000003f0000 : "firmware"
0x00000004001c-0x00000004090c : "loader"
0x00000004090c-0x00000014e400 : "linux"
mtd: partition "linux" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
0x00000014e400-0x0000003f0000 : "rootfs"
mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
mtd: device 4 (rootfs) set to be root filesystem
1 squashfs-split partitions found on MTD device rootfs
0x0000002b0000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "nvram"

full dmesg: http://codepad.org/2hiTlY4B

i started getting this ever since i updated using sysupgrade.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel