[OpenWrt-Devel] [PATCH uqmi] Add command --get-msisdn for getting phone number

[John Crispin]

On 18/11/2014 17:02, Sławomir Demeszko wrote:
> --- For two SIM cards from the same operator (Plus GSM) I get error
> message: "Not provisioned", when try to get MSISDN. Real phone with
> these cards inserted also cannot display a phone number. I can make
> calls normally. And other two (different operators) works
> correctly. Is anybody know why this happens?


Hi,

i tested this on my eplus sim card and it seems to work well. looking
at the code it also look correct. i will merge the patch in the hope
that this is related to the sim card and/or modem and not the actual
qmi call. if you figure out anything new related to this don't forget
to send an update please.

	John

> 
> commands-dms.c | 16 ++++++++++++++++ commands-dms.h |  2 ++ 2 files
> changed, 18 insertions(+)
> 
> diff --git a/commands-dms.c b/commands-dms.c index 563321e..ad5c89d
> 100644 --- a/commands-dms.c +++ b/commands-dms.c @@ -159,6 +159,22
> @@ cmd_dms_get_imsi_prepare(struct qmi_dev *qmi, struct qmi_request
> *req, struct qm return QMI_CMD_REQUEST; }
> 
> +static void cmd_dms_get_msisdn_cb(struct qmi_dev *qmi, struct
> qmi_request *req, struct qmi_msg *msg) +{ +	struct
> qmi_dms_get_msisdn_response res; + +
> qmi_parse_dms_get_msisdn_response(msg, &res); +	if
> (res.data.msisdn) +		blobmsg_add_string(&status, NULL,
> res.data.msisdn); +} + +static enum qmi_cmd_result 
> +cmd_dms_get_msisdn_prepare(struct qmi_dev *qmi, struct qmi_request
> *req, struct qmi_msg *msg, char *arg) +{ +
> qmi_set_dms_get_msisdn_request(msg); +	return QMI_CMD_REQUEST; +} 
> + #define cmd_dms_reset_cb no_cb static enum qmi_cmd_result 
> cmd_dms_reset_prepare(struct qmi_dev *qmi, struct qmi_request *req,
> struct qmi_msg *msg, char *arg) diff --git a/commands-dms.h
> b/commands-dms.h index 1f21b13..c20d007 100644 ---
> a/commands-dms.h +++ b/commands-dms.h @@ -8,6 +8,7 @@ 
> __uqmi_command(dms_set_new_pin, new-pin, required,
> CMD_TYPE_OPTION), \ __uqmi_command(dms_get_iccid, get-iccid, no,
> QMI_SERVICE_DMS), \ __uqmi_command(dms_get_imsi, get-imsi, no,
> QMI_SERVICE_DMS), \ +	__uqmi_command(dms_get_msisdn, get-msisdn,
> no, QMI_SERVICE_DMS), \ __uqmi_command(dms_set_operating_mode,
> set-device-operating-mode, required, QMI_SERVICE_DMS), \ 
> __uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS) \
> 
> @@ -23,6 +24,7 @@ "    --new-pin <new pin>:            New pin\n"
> \ "  --get-iccid:                      Get the ICCID\n" \ "
> --get-imsi:                       Get International Mobile
> Subscriber ID\n" \ +    "  --get-msisdn:                     Get
> the MSISDN (telephone number)\n" \ "  --reset-dms:
> Reset the DMS service\n" \ "  --set-device-operating-mode <m>   Set
> the device operating mode\n" \ "
> (modes: online, low_power, factory_test, offline\n" \
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel