[OpenWrt-Devel] [PATCH] [ar71xx] Added support for D-link DHP-1565 rev. A1
jaceq at aol.pl
jaceq at aol.pl
Mon Nov 17 04:38:15 EST 2014
From: Jacek Kikiewicz <jaceq at aol.pl>
Signed-off-by: Jacek Kikiewicz <jaceq at aol.pl>
---
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 4 +
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
.../base-files/etc/uci-defaults/04_led_migration | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-3.10 | 1 +
.../files/arch/mips/ath79/mach-dhp-1565-a1.c | 170 +++++++++++++++++++++
target/linux/ar71xx/generic/profiles/d-link.mk | 11 ++
target/linux/ar71xx/image/Makefile | 1 +
.../730-MIPS-ath79-add-DHP-1565A1.patch | 40 +++++
11 files changed, 234 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
create mode 100644 target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index b3a8fc5..24f5871 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -46,6 +46,7 @@ get_status_led() {
db120)
status_led="db120:green:status"
;;
+ dhp-1565-a1|\
dir-505-a1 |\
dir-600-a1 |\
dir-615-e1 |\
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 599fc19..2e41250 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -98,6 +98,10 @@ rb-2011uias-2hnd)
ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02"
;;
+dhp-1565-a1)
+ ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20"
+ ;;
+
dir-505-a1)
ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 743f9de..c7d8aec 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -258,6 +258,7 @@ mynet-n750)
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
+dhp-1565-a1 |\
dir-835-a1 |\
wndr3700v4 | \
wndr4300)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
index 0df94a0..1cef8b9 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
@@ -46,6 +46,7 @@ migrate_leds()
board=$(ar71xx_board_name)
case "$board" in
+dhp-1565-a1|\
dir-825-c1|\
dir-835-a1)
migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 40e9303..bd7a276 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -305,6 +305,9 @@ ar71xx_board_detect() {
*"DB120 reference board")
name="db120"
;;
+ *"DHP-1565 rev. A1")
+ name="dhp-1565-a1"
+ ;;
*"DIR-505 rev. A1")
name="dir-505-a1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 6220f16..3a3d4ee 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -167,6 +167,7 @@ platform_check_image() {
ap81 | \
ap83 | \
ap132 | \
+ dhp-1565-a1 |\
dir-505-a1 | \
dir-600-a1 | \
dir-615-c1 | \
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index 1b3eddb..3a2b4af 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DHP_1565_A1=y
CONFIG_ATH79_MACH_DIR_505_A1=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
new file mode 100644
index 0000000..ae47764
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
@@ -0,0 +1,170 @@
+/*
+ * D-Link DHP-1565 rev. A1 board support
+ *
+ * Copyright (C) 2014 Jacek Kikiewicz
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DHP1565A1_GPIO_LED_BLUE_USB 11
+#define DHP1565A1_GPIO_LED_AMBER_POWER 14
+#define DHP1565A1_GPIO_LED_BLUE_POWER 22
+#define DHP1565A1_GPIO_LED_BLUE_WPS 15
+#define DHP1565A1_GPIO_LED_AMBER_PLANET 19
+#define DHP1565A1_GPIO_LED_BLUE_PLANET 18
+#define DHP1565A1_GPIO_LED_WLAN_2G 13
+
+#define DHP1565A1_GPIO_WAN_LED_ENABLE 20
+
+#define DHP1565A1_GPIO_BTN_RESET 17
+#define DHP1565A1_GPIO_BTN_WPS 16
+
+#define DHP1565A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL (3 * DHP1565A1_KEYS_POLL_INTERVAL)
+
+#define DHP1565A1_MAC0_OFFSET 0xFFA0
+#define DHP1565A1_MAC1_OFFSET 0xFFB4
+#define DHP1565A1_WMAC0_OFFSET 0x5
+#define DHP1565A1_WMAC_CALDATA_OFFSET 0x1000
+#define DHP1565A1_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led dhp1565a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:amber:power",
+ .gpio = DHP1565A1_GPIO_LED_AMBER_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:power",
+ .gpio = DHP1565A1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:amber:planet",
+ .gpio = DHP1565A1_GPIO_LED_AMBER_PLANET,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:planet",
+ .gpio = DHP1565A1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = {
+ {
+ .desc = "Soft reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DHP1565A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DHP1565A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data dhp1565a1_ar8327_data = {
+ .pad0_cfg = &dhp1565a1_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info dhp1565a1_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &dhp1565a1_ar8327_data,
+ },
+};
+
+static void __init dhp1565a1_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
+ u8 wmac0[ETH_ALEN];
+
+ ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0);
+ ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dhp1565a1_gpio_keys),
+ dhp1565a1_gpio_keys);
+
+ ath79_init_mac(wmac0, mac0, 0);
+ ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(dhp1565a1_mdio0_info,
+ ARRAY_SIZE(dhp1565a1_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+}
+
+static void __init dhp1565a1_setup(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio),
+ dhp1565a1_leds_gpio);
+
+ dhp1565a1_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1",
+ "D-Link DHP-1565 rev. A1",
+ dhp1565a1_setup);
diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk
index eb721c3..b6eb66c 100644
--- a/target/linux/ar71xx/generic/profiles/d-link.mk
+++ b/target/linux/ar71xx/generic/profiles/d-link.mk
@@ -5,6 +5,17 @@
# See /LICENSE for more information.
#
+define Profile/DHP1565A1
+ NAME:=D-Link DHP-1565 rev. A1
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/DHP1565A1/Description
+ Package set optimized for the D-Link DHP-1565 rev. A1.
+endef
+
+$(eval $(call Profile,DHP1565A1))
+
define Profile/DIR505A1
NAME:=D-Link DIR-505 rev. A1
PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 3256cb8..7d0c341 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1121,6 +1121,7 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
+$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
diff --git a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
new file mode 100644
index 0000000..6ca0595
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
@@ -0,0 +1,40 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -39,6 +39,7 @@
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -283,6 +283,17 @@
+ select ATH79_DEV_USB
+ select MYLOADER
+
++config ATH79_MACH_DHP_1565_A1
++ bool "D-Link DHP-1565 rev. A1 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_DIR_505_A1
+ bool "D-Link DIR-505-A1 support"
+ select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -54,6 +54,7 @@
+ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list