[OpenWrt-Devel] lantiq vr9 and fxs

[Luka Perkov]

Hi Eddi,

On Tue, Nov 11, 2014 at 04:10:30PM +0100, Eddi De Pieri wrote:
> asterisk:
> set debug output on console
> console => notice,warning,error,debug
> 
> so, all software recognize correctly the correct port....
> 
> [Nov 11 15:08:06] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on
> port 0 detected event off hook
> [Nov 11 15:08:10] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on
> port 0 detected event on hook
> [Nov 11 15:08:24] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on
> port 1 detected event off hook
> [Nov 11 15:08:26] DEBUG[894]: chan_lantiq.c:835 lantiq_dev_event_hook: on
> port 1 detected event on hook
> 
> but both owsip and asterisk route call to TAPI/1 (and never TAPI/2)

I don't remember if that worked on owsip. But asterisk should support
both channels.

What about TAPI/0? I am unsure if we started naming the channels from 0
or 1...

Luka
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel