[OpenWrt-Devel] ar8216 patch series

[Dirk Neukirchen]

On 09.11.2014 00:19, Heiner Kallweit wrote:
> Am 08.11.2014 um 13:49 schrieb Dirk Neukirchen:
>> On 31.10.2014 21:46, Heiner Kallweit wrote:
>>> Patch series adds more abstraction to the driver, adds smaller improvements
>>> and fixes an issue with kernels >= 3.14.
>>> Ticket 17800: With kernel 3.14 sometimes ports operate at 10/half only
>>>
>>> This patch series works for me on:
>>> TP-LINK TL-WDR4300 ( ar71xx + AR8327v2)
>>> TP-LINK TL-WDR4900 (mpc85xx + AR8327v4)
>>>
>>> I'd appreciate if others with non-AR8327 switches supported by the
>>> ar8216 driver test this patch series.
>>>
>>> Rgds, Heiner
>>
>> I was testing this series on a TP-LINK TL-WDR3600 ( ar71xx + AR8327v2)
>> but with default kernel (3.10.58). - as I understand this is supposed to work too
>>
>> I encountered an error: WAN (eth0.2) does not work. (LAN seems fine)
>> The dmesg seems to be identical between patched+unpatched. Both list
>>
>> switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
>> ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
>> eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
> Dirk,
> here come updated versions of patches 3-5 from the series. I'd appreciate if you could test the updated series.
> changes:
> patch 3|4: keep phy_fixup callback closer to the original fixup code
> patch 5: less intrusive, doesn't touch advertising
> 
> Regards, Heiner
> 

I tested your updated series.
TP-Link WDR3600 ( ar71xx + AR8327v2) WAN is working again

Additionally I tested your series on a
Sitecom WLR8100 ( ar71xx + AR8337v2) - it works with 3.10.58 there too
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel