[OpenWrt-Devel] [RFC] mt7620 wifi

[Roman Yeryomin]

On 1 July 2014 01:54, xfguo at credosemi.com <xfguo at credosemi.com> wrote:
> can you just show the output of "swconfig dev switch0 show" ?
>
>>
>>Also it appeared that ethernet is broken for mt7620n (didn't test
>>other ramips targets) on trunk. Apparently after this (not sure how
>>it's possible): https://dev.openwrt.org/changeset/41331
>>As `swconfig list' tells: Found: switch0 - mt7530
>>

I don't have the board in hands right now but the other thing I've
noticed that VID for both 1 and 2 vlans was 0. And setting it to
correct values didn't have any effect.

Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel