[OpenWrt-Devel] Xilinx Zynq zedboard integration

[Javier Domingo Cansino]

I have found that I was compiling u-boot with a wrong config. Anyway, I
have advanced now till the next challenge.

same output as before, but now:


## Flattened Device Tree blob at 02a00000
   Booting using the fdt blob at 0x2a00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 1fa6d000, end 1fb2f649 ... OK
   Loading Device Tree to 1fa69000, end 1fa6cab2 ... OK

Starting kernel
​ ...

So I suppose now there is really something wrong with the kernel. I have
repeated the steps by hand, and now it stops printing after the Starting
kernel ... line.

I have enabled early_prinks, ​and all those things I have been said to. May
it be due to the kernel not printing to the right device? Is there any way
to check that?

Javier Domingo Cansino
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140629/7af2f20f/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel