[OpenWrt-Devel] [PATCH][brcm63xx] Add support for Comtrend WAP-5813n
Álvaro Fernández Rojas
noltari at gmail.com
Fri Jun 27 13:09:23 EDT 2014
This adds support for Comtrend WAP-5813n.
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index c3babd8..f091523 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -95,6 +95,13 @@ DVG3810BN)
ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t"
;;
+96369R-1231N)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "eth0" "1" "1"
+ ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 5t"
+ ucidef_add_switch_vlan "eth0" "2" "4 5t"
+ ;;
+
NB6)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
index 2bb79cc..a2c0213 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
@@ -19,6 +19,7 @@ case "$board_name" in
963281TAN |\
963281T_TEF |\
96358-502V |\
+ 96369R-1231N |\
"CPVA502+" |\
AW4339U |\
CPVA642 |\
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 679fedd..c6b2d20 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -28,6 +28,11 @@ brcm63xx_detect() {
status_led="96328A-1241N:green:power"
ifname=eth0
;;
+ 96369R-1231N)
+ brcm63xx_has_reset_button="true"
+ status_led="WAP-5813n:green:power"
+ ifname="eth0"
+ ;;
RTA770BW)
brcm63xx_has_reset_button="true"
status_led="RTA770BW:green:diag"
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 8f661d2..e0c77b6 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -227,6 +227,8 @@ define Image/Build
$(call Image/Build/CFE,$(1),CT6373-1,6358,CT6373)
# Comtrend 536, 5621
$(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
+ # Comtrend WAP-5813n
+ $(call Image/Build/CFE,$(1),96369R-1231N,6368,WAP-5813n,,--pad 4)
# Davolink DV201AMR
$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
# USR 9108
diff --git a/target/linux/brcm63xx/patches-3.10/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-3.10/561-board_WAP-5813n.patch
new file mode 100644
index 0000000..d09c084
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/561-board_WAP-5813n.patch
@@ -0,0 +1,118 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -14,6 +14,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/platform_data/b53.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+ #include <linux/spi/74x164.h>
+@@ -4473,6 +4474,99 @@ static struct board_info __initdata boar
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ };
++
++static struct b53_platform_data WAP5813n_b53_pdata = {
++ .alias = "eth0",
++};
++
++static struct spi_board_info WAP5813n_spi_devices[] = {
++ {
++ .modalias = "b53-switch",
++ .max_speed_hz = 781000,
++ .bus_num = 0,
++ .chip_select = 0,
++ .platform_data = &WAP5813n_b53_pdata,
++ }
++};
++
++static struct board_info __initdata board_WAP5813n = {
++ .name = "96369R-1231N",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [4] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++
++ .leds = {
++ {
++ .name = "WAP-5813n:green:power",
++ .gpio = 22,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "WAP-5813n:red:power",
++ .gpio = 24,
++ },
++ {
++ .name = "WAP-5813n:green:inet",
++ .gpio = 5,
++ },
++ {
++ .name = "WAP-5813n:red:inet",
++ .gpio = 31,
++ },
++ {
++ .name = "WAP-5813n:green:wps",
++ .gpio = 23,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "wlan",
++ .gpio = 32,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WLAN,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ {
++ .desc = "wps",
++ .gpio = 35,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++
++ .spis = WAP5813n_spi_devices,
++ .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
++};
+ #endif
+
+ /*
+@@ -4856,6 +4950,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ &board_96368mvwg,
+ &board_96368mvngr,
++ &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ &board_963268bu_p300,
diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
index b3ced8d..73d2453 100644
--- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
@@ -5,10 +5,10 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/export.h>
+ #include <linux/platform_data/b53.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-@@ -4869,7 +4870,7 @@ static const struct board_info __initcon
+@@ -4964,7 +4965,7 @@ static const struct board_info __initcon
* bcm4318 WLAN work
*/
#ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
.revision = 0x02,
.board_rev = 0x17,
.country_code = 0x0,
-@@ -4889,6 +4890,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -4984,6 +4985,7 @@ static struct ssb_sprom bcm63xx_sprom =
.boardflags_lo = 0x2848,
.boardflags_hi = 0x0000,
};
diff --git a/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch
new file mode 100644
index 0000000..8b81aef
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch
@@ -0,0 +1,118 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -13,6 +13,7 @@
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
+ #include <linux/pci_ids.h>
++#include <linux/platform_data/b53.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+@@ -4470,6 +4471,99 @@ static struct board_info __initdata boar
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ };
++
++static struct b53_platform_data WAP5813n_b53_pdata = {
++ .alias = "eth0",
++};
++
++static struct spi_board_info WAP5813n_spi_devices[] = {
++ {
++ .modalias = "b53-switch",
++ .max_speed_hz = 781000,
++ .bus_num = 0,
++ .chip_select = 0,
++ .platform_data = &WAP5813n_b53_pdata,
++ }
++};
++
++static struct board_info __initdata board_WAP5813n = {
++ .name = "96369R-1231N",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [4] = {
++ .used = 1,
++ .phy_id = 0xff,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++
++ .leds = {
++ {
++ .name = "WAP-5813n:green:power",
++ .gpio = 22,
++ .default_trigger = "default-on",
++ },
++ {
++ .name = "WAP-5813n:red:power",
++ .gpio = 24,
++ },
++ {
++ .name = "WAP-5813n:green:inet",
++ .gpio = 5,
++ },
++ {
++ .name = "WAP-5813n:red:inet",
++ .gpio = 31,
++ },
++ {
++ .name = "WAP-5813n:green:wps",
++ .gpio = 23,
++ .active_low = 1,
++ },
++ },
++
++ .buttons = {
++ {
++ .desc = "wlan",
++ .gpio = 32,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WLAN,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ {
++ .desc = "reset",
++ .gpio = 34,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ {
++ .desc = "wps",
++ .gpio = 35,
++ .active_low = 1,
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++ },
++ },
++
++ .spis = WAP5813n_spi_devices,
++ .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
++};
+ #endif
+
+ /*
+@@ -4853,6 +4947,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ &board_96368mvwg,
+ &board_96368mvngr,
++ &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ &board_963268bu_p300,
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list