[OpenWrt-Devel] [BUG] NAND sysupgrade broke ubifs on Netgear WNDR3700v4/4300.

[Paul Blazejowski]

Hi again,

thanks for the tftp fix, flushing just became so much faster and easier.

Tested trunk r41336 after your jffs2 fix and the image boots fine,
restored my configuration changes, rebooted the router and all changes
are saved now. I will post the working dmesg to the ticket at
https://dev.openwrt.org/ticket/16840 but it is safe to say that you can
close it ;-) now.

Sysupgrade image(s) for 3700v4 and 4300 do not work now, guess this is
next on the list...

Thank you,
-paul

On Tue, 2014-06-24 at 20:18 +0200, John Crispin wrote:
> 
> On 24/06/2014 19:05, Paul Blazejowski wrote:
> > John,
> > 
> > Yes i use the reset with pin and from there i tftp the original
> > firmware from netgear after that i go to the gui and upload the
> > open-wrt image because the router will not accept the wndr3700v4
> > image (there's a cosmetic fix for that, i created a patch that
> > someone from the forums has sent months ago to this list but it was
> > never accepted...) https://dev.openwrt.org/ticket/16840
> > 
> > With that patch tftp'ing the 
> > openwrt-ar71xx-nand-wndr3700v4-ubi-factory.img works without need
> > to flash the original firmware.
> > 
> > If there's another method that can be used to flash the image(s)
> > please let me know i would want to try any alternative ways of
> > flashing and could learn a thing or two in the process as well ;-)
> > 
> > Thank you, -paul
> 
> 
> Hi,
> 
> i just pushed the V vs v fix and another fix that removes the jffs2
> magic. i think this might have been the cause of the problems. please
> retry with current trunk and let me know if the problem is gone or
> still there
> 
> 	John
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140624/b589e5aa/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel