[OpenWrt-Devel] Problem compiling kernel 3.3.8 in AA

[Francisco Cuesta]

2014-06-11 17:17 GMT+02:00 Tijs Van Buggenhout <tvb at able.be>:

>  It seems that the kernel config being generated by openwrt is incomplete
> for some reason. Are you using an old openwrt config to build for a new AA
> revision, without going through the openwrt configuration stage ?
>

Yes I am doing it, I am replacing my own kernel conf file with the options
I wanted. Is that not possible then? Or I have to create at least once a
conf file with the new style,apply my settings and then use it?

Thanks in advance,




>
>
> Files at interest are
> AA/build_dir/linux-ar71xx_generic/linux-3.3.8/.config and AA/.config
> (openwrt config).
>
>
>
> Regards,
>
> Tijs
>
>
>
> On Friday 06 June 2014 20:56:08 Francisco Cuesta wrote:
>
> Hello,  I am trying to compile my trunk version of Attitude Adjustment
> with some USB features enabled for allowing the connection of Atheros USB
> dongles to a tplink WDR4300ND.
>
> However, I am facing always the same problem, the firmware creation
> process is always stopped at the same point, which can be seen below. I
> don't know the reason, Just after that  I am ask to set again what looks
> like the kernel configuration, but I am not prompted any error, as far as I
> can see.
>
> I have just tried to compile the kernel, and I was given back the same
> state...
>
> May anyone enligthen me a bit?
>
> Thanks in advance,
>
> regards!
>
> ...
>
> make[4]: Entering directory `/home/j/openwrt/attitudeAdjustment/build_dir/linux-ar71xx_generic/linux-3.3.8'
>
>   HOSTCC  scripts/kconfig/conf.o
>
>   SHIPPED scripts/kconfig/zconf.tab.c
>
>   SHIPPED scripts/kconfig/zconf.lex.c
>
>   SHIPPED scripts/kconfig/zconf.hash.c
>
>   HOSTCC  scripts/kconfig/zconf.tab.o
>
>   HOSTLD  scripts/kconfig/conf
>
> scripts/kconfig/conf --silentoldconfig Kconfig
>
> *
>
> * Restart config...
>
> *
>
> *
>
> * GCOV-based kernel profiling
>
> *
>
> Enable gcov-based kernel profiling (GCOV_KERNEL) [N/y/?] (NEW)
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140617/961c6cf3/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel