[OpenWrt-Devel] [PATCH 3/3] lantiq: BT Home Hub 3A - userspace

[Ben Mulvihill]

BT Home Hub 3A - userspace

Signed-off-by: Ben Mulvihill <ben.mulvihill at gmail.com>
---
 target/linux/lantiq/base-files/etc/uci-defaults/01_leds    |    5 +++++
 target/linux/lantiq/base-files/etc/uci-defaults/02_network |    2 +-
 target/linux/lantiq/base-files/lib/upgrade/platform.sh     |    2 +-
 3 files changed, 7 insertions(+), 2 deletions(-)

diff -uprN a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds
--- a/target/linux/lantiq/base-files/etc/uci-defaults/01_leds	2014-12-21 22:20:52.000000000 +0100
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/01_leds	2014-12-21 22:24:31.000000000 +0100
@@ -25,6 +25,11 @@ BTHOMEHUBV2B)
 	ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
 	ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1"
 	;;
+BTHOMEHUBV3A)
+	ucidef_set_led_default "power" "power" "soc:blue:power" "1"
+	ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
+	ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
+	;;
 VGV7519)
 	ucidef_set_led_default "power" "power" "power" "0"
 	ucidef_set_led_default "power2" "power2" "power2" "1"
diff -uprN a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network	2014-12-20 10:29:44.000000000 +0100
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network	2014-12-21 22:24:31.000000000 +0100
@@ -164,7 +164,7 @@ ARV7519RW22)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	;;
 
-BTHOMEHUBV2B)
+BTHOMEHUBV2B|BTHOMEHUBV3A)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	;;
diff -uprN a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/base-files/lib/upgrade/platform.sh
--- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh	2014-12-20 10:29:44.000000000 +0100
+++ b/target/linux/lantiq/base-files/lib/upgrade/platform.sh	2014-12-21 22:29:23.000000000 +0100
@@ -7,7 +7,7 @@ platform_check_image() {
 	local board=$(lantiq_board_name)
 
 	case "$board" in
-		BTHOMEHUBV2B )
+		BTHOMEHUBV2B|BTHOMEHUBV3A )
 			nand_do_platform_check $board $1
 			return $?;
 			;;
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel