[OpenWrt-Devel] batman-adv ipv6

[Lars Boegild Thomsen]

For a while I have been running a batman-adv mesh as my "backbone".  Configuration is pretty straight forward - my "lan" interface is simply an ethernet interface, a wifi access point and the bat0 interface bridged together.  This was working flawlessly until about a month ago when IPv6 auto configuration stopped working.  I got a feeling this was when the kernel was updated from 3.10 to 3.14 (all devices are TP-Link routers - so Atheros based).

I have ap isolation disabled on all nodes and I have tried with multicast mode both enabled and disabled (back when I was working I usually had it disabled).

-- 
Lars Bøgild Thomsen
Mobile: +60 12 361 6644
Public Key: http://bright-things.com/lars-bogild-thomsen/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20141220/05012b90/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel