[OpenWrt-Devel] support for Sagemcom F at ST2804V7

[José Vázquez]

Take a look at this patch:
http://patchwork.openwrt.org/patch/6751/
First of all you need to find your router's board id.

If changing the board id CFE works then you have a some kind of solution.

2014-12-16 9:26 GMT+01:00, Eugene <jekos1 at yandex.ru>:
> Hello,
>
> Is it possible to add support for Sagemcom F at ST2804V7 ?
>
> I tried openwrt-F at ST2704V2-squashfs-cfe.bin and some others
> (barrier_breaker) on it,
> bootlog (via serial port) says: Kernel panic - not syncing: unable to
> detect bcm963xx board.
>
> If it is possible, i will supply all required information/data.
>
> P.S. Openwrt works if I change board ID in CFE to F at ST2704V2(with 'b'
> command)
>
> Best regards,
> Eugene
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel