[OpenWrt-Devel] RT5350 UART not working.
Luis Soltero
lsoltero at globalmarinenet.com
Mon Dec 1 07:40:40 EST 2014
anyone have any ideas on how to get the RT5350 UART working?
here is the error in the log.
[ 0.460000] pinctrl core: add 1 pinmux maps
[ 0.460000] rt2880-pinmux pinctrl.1: found group selector 2 for uartf
[ 0.460000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for 10000500.uart
[ 0.460000] rt2880-pinmux pinctrl.1: pin io7 already requested by pinctrl.1; cannot claim for 10000500.uart
[ 0.480000] rt2880-pinmux pinctrl.1: pin-7 (10000500.uart) status -22
[ 0.480000] rt2880-pinmux pinctrl.1: could not request pin 7 (io7) from group uartf on device rt2880-pinmux
[ 0.510000] of_serial 10000500.uart: Error applying setting, reverse things back
[ 0.530000] 10000500.uart: ttyS1 at MMIO 0x10000500 (irq = 13, base_baud = 2500000) is a 16550A
here is the DTS config for the uart.
palmbus at 10000000 {
uart at 500 {
status = "okay";
};
i2c at 900 {
status = "okay";
};
gpio0: gpio at 600 {
status = "okay";
};
gpio1: gpio at 660 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag";
ralink,function = "gpio";
};
uartf {
ralink,group = "uartf";
ralink,function = "uartf";
};
};
};
Any info/hints on this are greatly appreciated.
Thanks,
--luis
--
Luis Soltero, Ph.D., MCS
Director of Software Development, CTO
Global Marine Networks, LLC
StarPilot, LLC
Tel: +1.865.379.8723
Fax: +1.865.681.5017
E-Mail: lsoltero at globalmarinenet.net
Web: http://www.globalmarinenet.net
Web: http://www.redportglobal.com
Web: http://www.starpilotllc.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list