[OpenWrt-Devel] [PATCHv2 2/2] [kernel] linux/kirkwood Pogoplug v4 support
nwf
8S9K8UGO5JGPI3U067229BBACKMQIGVH at cmx.ietfng.org
Mon Dec 1 00:39:57 EST 2014
And the other half: Linux kernel patch and DTS file for the Pogoplug v4
hardware. I am indebted to everyone in the thread at
https://forum.openwrt.org/viewtopic.php?pid=250745#p250745 for their efforts.
Signed-off-by: Nathaniel Wesley Filardo <8S9K8UGO5JGPI3U067229BBACKMQIGVH at cmx.ietfng.org>
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index ec1b978..9324974 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -135,6 +135,9 @@ Image/InstallKernel/Template/ICONNECT=$(call Image/InstallKernel/Template,iconne
Image/BuildKernel/Template/POGOE02=$(call Image/BuildKernel/Template,pogo_e02)
Image/InstallKernel/Template/POGOE02=$(call Image/InstallKernel/Template,pogo_e02)
+Image/BuildKernel/Template/POGO4=$(call Image/BuildKernel/Template,pogov4)
+Image/InstallKernel/Template/POGO4=$(call Image/InstallKernel/Template,pogov4)
+
Image/BuildKernel/Template/IOMEGA_IX2_200=$(call Image/BuildKernel/Template,iomega_ix2_200)
Image/InstallKernel/Template/IOMEGA_IX2_200=$(call Image/InstallKernel/Template,iomega_ix2_200)
diff --git a/target/linux/kirkwood/patches-3.14/160-pogoplug_v4.patch b/target/linux/kirkwood/patches-3.14/160-pogoplug_v4.patch
new file mode 100644
index 0000000..cf3f1e2
--- /dev/null
+++ b/target/linux/kirkwood/patches-3.14/160-pogoplug_v4.patch
@@ -0,0 +1,179 @@
+With much help from others at https://forum.openwrt.org/viewtopic.php?pid=250745#p250745
+
+--- linux-3.14.18/arch/arm/boot/dts/Makefile.orig
++++ linux-3.14.18/arch/arm/boot/dts/Makefile
+@@ -114,6 +114,7 @@
+ kirkwood-openblocks_a6.dtb \
+ kirkwood-openblocks_a7.dtb \
+ kirkwood-pogo_e02.dtb \
++ kirkwood-pogov4.dtb \
+ kirkwood-sheevaplug.dtb \
+ kirkwood-sheevaplug-esata.dtb \
+ kirkwood-topkick.dtb \
+
+
+--- /dev/null
++++ linux-3.14.18/arch/arm/boot/dts/kirkwood-pogov4.dts
+@@ -0,0 +1,161 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++ model = "Pogoplug V4";
++ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x8000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootdelay=10";
++ };
++
++ mbus {
++ pcie-controller {
++ status = "okay";
++
++ pcie at 1,0 {
++ status = "okay";
++ };
++ };
++ };
++
++ ocp at f1000000 {
++ pinctrl: pinctrl at 10000 {
++ pmx_led_green: pmx-led-green {
++ marvell,pins = "mpp22";
++ marvell,function = "gpio";
++ };
++ pmx_led_red: pmx-led-red {
++ marvell,pins = "mpp24";
++ marvell,function = "gpio";
++ };
++ pmx_sdio_cd: pmx-sdio-cd {
++ marvell,pins = "mpp27";
++ marvell,function = "gpio";
++ };
++ pmx_sdio_wp: pmx-sdio-wp {
++ marvell,pins = "mpp28";
++ marvell,function = "gpio";
++ };
++ pmx_button_eject: pmx-button-eject {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++ };
++
++ spi at 10600 {
++ status = "okay";
++
++ m25p05 at 0 {
++ compatible = "m25p05-nonjedec";
++ reg = <0>;
++ spi-max-frequency = <20000000>;
++ mode = <0>;
++ };
++ };
++
++ serial at 12000 {
++ status = "ok";
++ };
++
++ sata at 80000 {
++ status = "okay";
++ nr-ports = <1>;
++ };
++
++ i2c0: i2c at 11000 {
++ status = "ok";
++ };
++
++ mvsdio at 90000 {
++ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
++ pinctrl-names = "default";
++ status = "okay";
++ cd-gpios = <&gpio0 27 1>;
++ wp-gpios = <&gpio0 28 1>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
++ pinctrl-names = "default";
++ health {
++ label = "status:green:health";
++ gpios = <&gpio0 22 1>;
++ linux,default-trigger = "default-on";
++ };
++ fault {
++ label = "status:red:fault";
++ gpios = <&gpio0 24 1>;
++ linux,default-trigger = "none";
++ };
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = <&pmx_button_eject>;
++ pinctrl-names = "default";
++
++ button at 1 {
++ label = "Eject Button";
++ linux,code = <KEY_EJECTCD>;
++ gpios = <&gpio0 29 1>;
++ };
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy0: ethernet-phy at 0 {
++ device_type = "ethernet-phy";
++ reg = <0>;
++ };
++};
++
++ð0 {
++ status = "okay";
++ ethernet0-port at 0 {
++ phy-handle = <ðphy0>;
++ };
++};
++
++&nand {
++ status = "okay";
++
++ partition at 0 {
++ label = "u-boot";
++ reg = <0x0000000 0x200000>;
++ read-only;
++ };
++
++ partition at 200000 {
++ label = "uImage";
++ reg = <0x200000 0x300000>;
++ };
++
++ partition at 500000 {
++ label = "uImage2";
++ reg = <0x500000 0x300000>;
++ };
++
++ partition at 800000 {
++ label = "failsafe";
++ reg = <0x800000 0x800000>;
++ };
++
++ partition at 2500000 {
++ label = "root";
++ reg = <0x1000000 0x7000000>;
++ };
++};
+
diff --git a/target/linux/kirkwood/profiles/110-nas.mk b/target/linux/kirkwood/profiles/110-nas.mk
index 1bd188c..4300c11 100644
--- a/target/linux/kirkwood/profiles/110-nas.mk
+++ b/target/linux/kirkwood/profiles/110-nas.mk
@@ -85,6 +85,31 @@ POGOE02_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
$(eval $(call Profile,POGOE02))
+define Profile/POGO4
+ NAME:=Cloud Engines Pogoplug v4
+ PACKAGES:= \
+ kmod-ata-marvell-sata \
+ kmod-crypto-mv-cesa \
+ kmod-i2c-mv64xxx \
+ kmod-thermal-kirkwood \
+ kmod-usb2 kmod-usb3 \
+ kmod-usb-storage \
+ uboot-kirkwood-pogo4 \
+ uboot-envtools
+ DEPENDS:= \
+ + at TARGET_ROOTFS_INCLUDE_KERNEL \
+ + at TARGET_ROOTFS_INCLUDE_UIMAGE \
+ + at TARGET_ROOTFS_INCLUDE_DTB
+endef
+
+define Profile/POGO4/Description
+ Package set compatible with Cloud Engines Pogoplug v4 board.
+endef
+
+POGO4_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
+POGO4_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,POGO4))
define Profile/IOMEGA_IX2_200
NAME:=Iomega StorCenter ix2-200
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 473 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20141201/51efe1ff/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list