[OpenWrt-Devel] [PATCH] brcm47xx: image: build alternative TRX using less optimized LZMA

[Rafał Miłecki]

On 26 August 2014 02:34, Stephen Parry <sgparry at mainscreen.com> wrote:
> 1. About 9 months ago I built a trx using trunk that flashed and worked OK.
> 2. Two weeks ago I built a new image. This loaded and tested fine as ELF via
> tftp boot so I flashed the trx using MTD command. the resulting image hung
> after "starting program at 8001000" just as you described.

If OpenWrt used to work earlier, it seems that hang at "Starting
program at 0x80001000" is not caused by a image using LZMA loader.

Such a hang could be caused as well by some early crash in booting
process. So early that you can't even see first kernel messages and
the crash log.
It would be cool to find a difference between this 9 month old build
and current trunk that broke WNR3500L.

My patch probably won't change anything for WNR3500L.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel