[OpenWrt-Devel] Netgear WNR1000 v3 N150 -- Is it possible to install OpenWRT on this without opening the box

[quickbooks office]

I installed this:

[user at localhost openwrt]$ md5sum *
65111512db032e42b581a2041c63d816  openwrt-wnr1000_v3-squashfs.chk
[user at localhost openwrt]$


but now the Power light on the router is Orange. It doesn't turn to green.

I connected to LAN port 4, the port lights up to green.

But I do not get an IP automatically assigned to my PC.

I tried manually  assigning my PC IP 192.168.1.125 and gateway 192.168.1.1

telnet / ssh does not work.

[user at localhost ~]$ telnet 192.168.1.1
Trying 192.168.1.1...
telnet: connect to address 192.168.1.1: No route to host
[user at localhost ~]$ telnet 192.168.100.1
Trying 192.168.100.1...
telnet: connect to address 192.168.100.1: No route to host
[user at localhost ~]$ telnet 192.168.100.1
Trying 192.168.100.1...
telnet: connect to address 192.168.100.1: No route to host
[user at localhost ~]$ telnet 192.168.0.1
Trying 192.168.0.1...
telnet: connect to address 192.168.0.1: No route to host
[user at localhost ~]$

This is my first time using Open WRT  so I am hoping I have not bricked it.

On Fri, Aug 15, 2014 at 6:42 AM, Rafał Miłecki <zajec5 at gmail.com> wrote:
> On 14 August 2014 07:48, Rafał Miłecki <zajec5 at gmail.com> wrote:
>> On 14 August 2014 05:46, quickbooks office <quickbooks.office at gmail.com> wrote:
>>> Is it possible to install Open WRT on Netgear WNR1000 v3 N150 without
>>> opening the box up?
>>
>> (...)
>>
>> OpenWrt build bots should start generating firmware for your device in
>> few next days.
>
> You can give it a try:
> https://downloads.openwrt.org/snapshots/trunk/brcm47xx.mips74k/
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel