[OpenWrt-Devel] [PATCH] ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMAC

[Matthias Schiffer]

This sets the MAC address of the WLAN interface to the "official" primary MAC
address (the one on the label under the devices, and the one used with the stock
firmware). The MAC address used so far (primary-1) isn't even used at all with
the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the
WAN interface (like OpenWrt does with this patch).

Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
I think this should also be applied to Barrier Breaker.

 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
index 4f873e2..3e79ee1 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
@@ -168,7 +168,6 @@ static void __init tl_wr1043nd_v2_setup(void)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-	u8 tmpmac[ETH_ALEN];
 
 	ath79_register_m25p80(&wr1043nd_v2_flash_data);
 
@@ -178,8 +177,7 @@ static void __init tl_wr1043nd_v2_setup(void)
 					ARRAY_SIZE(tl_wr1043_v2_gpio_keys),
 					tl_wr1043_v2_gpio_keys);
 
-	ath79_init_mac(tmpmac, mac, -1);
-	ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, tmpmac);
+	ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, mac);
 
 	mdiobus_register_board_info(wr1043nd_v2_mdio0_info,
 				    ARRAY_SIZE(wr1043nd_v2_mdio0_info));
-- 
2.0.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel