[OpenWrt-Devel] Porting OpenWRT to Buffalo WZR-1750DHP
Ronaldo Afonso
ronaldo at ronaldoafonso.com.br
Mon Aug 4 14:31:21 EDT 2014
Hi,
Sorry for the delay and for not being so explicit.
Well, the WZR-1750DHPD is already shipped with DD-WRT, so I think it
would not be so hard to port it to OpenWRT.
I just have the hardware and I'm able to compile OpenWRT and test it. I'm
a C programmer, but I don't have a very good device driver programming
skill.
I can do any tests using that device.
Following is the hardware specs ...
1) root at DD-WRT:~# cat /proc/cpuinfo
model name : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
model name : ARMv7 Processor rev 0 (v7l)
processor : 1
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000
2) root at DD-WRT:~# cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 528314368 33005568 495308800 0 3784704 10379264
Swap: 0 0 0
MemTotal: 515932 kB
MemFree: 483700 kB
MemShared: 0 kB
Buffers: 3696 kB
Cached: 10136 kB
SwapCached: 0 kB
Active: 5528 kB
Inactive: 10056 kB
Active(anon): 1752 kB
Inactive(anon): 0 kB
Active(file): 3776 kB
Inactive(file): 10056 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 393216 kB
HighFree: 380528 kB
LowTotal: 122716 kB
LowFree: 103172 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 1776 kB
Mapped: 1152 kB
Shmem: 0 kB
Slab: 6092 kB
SReclaimable: 1360 kB
SUnreclaim: 4732 kB
KernelStack: 336 kB
PageTables: 224 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 257964 kB
Committed_AS: 4792 kB
VmallocTotal: 892928 kB
VmallocUsed: 34196 kB
VmallocChunk: 584220 kB
3) root at DD-WRT:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 3.10.34-rc1 (root at dd-wrt.buildserver) (gcc version 4.8.3
(OpenWrt/Linaro GCC 4.8-2014.01 r39555) ) #2005 SMP Mon Mar 24 07:49:09 CET
2014
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Northstar Prototype
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writealloc
map io
MPCORE found at 19020000 (VIRT d9020000) 18000000 d8000000
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c03a6900, node_mem_map c0429000
Normal zone: 256 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 32768 pages, LIFO batch:7
HighMem zone: 4864 pages used for memmap
HighMem zone: 98304 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @c1838000 s7040 r8192 d13440 u32768
pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130816
Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3
earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB 384MB = 512MB total
Memory: 515700k/515700k available, 8588k reserved, 393216K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc034fda4 (3360 kB)
.init : 0xc0350000 - 0xc038ab80 ( 235 kB)
.data : 0xc038c000 - 0xc03c8b48 ( 243 kB)
.bss : 0xc03c8b48 - 0xc0428e64 ( 385 kB)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 2
NR_IRQS:256
MPCORE GIC init
External imprecise Data abort at addr=0x0, fsr=0x1c06 ignored.
MPCORE Global Timer Clock 400000000Hz on IRQ 27
sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 10737ms
register local timer
smp_twd: clock not found -2
Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Calibrating local timer... 399.69MHz.
2 cores has been found
Setting up static identity map for 0xc0012660 - 0xc0012694
L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL
0x7a130000
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (3188.32 BogoMIPS).
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Found a ST compatible (Marconix) serial flash with 16 64KB blocks; total
size 1MB
found remapped nvram on sflash
CCA UART Clock Config: Sel=1 Ovr=1 Div=48
CCA UART Clock rate 100000000Hz
bio: create slab <bio-0> at 0
Switching to clocksource mpcore_gtimer
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
init gpio code
Buffalo WZR-1750DHP
PCI: no core
PCI: no core
PCI: scanning bus 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [14e4:0800] type 00 class 0x050100
pci 0000:00:00.0: reg 10: [mem 0x18000000-0x18000fff]
pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [14e4:050b] type 00 class 0xffffff
pci 0000:00:01.0: reg 10: [mem 0x18001000-0x18001fff]
pci 0000:00:01.0: reg 14: [mem 0x18002000-0x18002fff]
pci 0000:00:01.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:02.0: [14e4:0502] type 00 class 0xffffff
pci 0000:00:02.0: reg 10: [mem 0x1802c000-0x1802cfff]
pci 0000:00:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:03.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:03.0: reg 10: [mem 0x18024000-0x18024fff]
pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:04.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:04.0: reg 10: [mem 0x18025000-0x18025fff]
pci 0000:00:04.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:05.0: reg 10: [mem 0x18026000-0x18026fff]
pci 0000:00:05.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
pci 0000:00:06.0: reg 10: [mem 0x18027000-0x18027fff]
pci 0000:00:06.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
pci 0000:00:07.0: reg 10: [mem 0x18012000-0x18012fff]
pci 0000:00:07.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
pci 0000:00:08.0: reg 10: [mem 0x18013000-0x18013fff]
pci 0000:00:08.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
pci 0000:00:09.0: reg 10: [mem 0x18014000-0x18014fff]
pci 0000:00:09.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
pci 0000:00:0a.0: reg 10: [mem 0x1800b000-0x1800bfff]
pci 0000:00:0a.0: reg 14: [mem 0x1800c000-0x1800cfff]
pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 10: [mem 0x18022000-0x18022fff]
pci 0000:00:0b.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 10: [mem 0x18021000-0x18021fff]
pci 0000:00:0b.1: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
pci 0000:00:0c.0: reg 10: [mem 0x18023000-0x18023fff]
pci 0000:00:0c.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
pci 0000:00:0d.0: reg 10: [mem 0x18020000-0x18020fff]
pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0e.0: [14e4:0506] type 00 class 0xffffff
pci 0000:00:0e.0: reg 10: [mem 0x18210000-0x1821ffff]
pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:0f.0: [14e4:0507] type 00 class 0xffffff
pci 0000:00:0f.0: reg 10: [mem 0x18010000-0x18010fff]
pci 0000:00:0f.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:10.0: [14e4:0508] type 00 class 0xffffff
pci 0000:00:10.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:11.0: [14e4:0509] type 00 class 0xffffff
pci 0000:00:11.0: reg 10: [mem 0x18028000-0x18028fff]
pci 0000:00:11.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:12.0: [14e4:050a] type 00 class 0xffffff
pci 0000:00:12.0: reg 10: [mem 0x18029000-0x18029fff]
pci 0000:00:12.0: reg 30: [mem 0x00000000-0x000007ff pref]
PCI: Fixing up bus 0
PCIE1 link=1
PCIE1 switching to GEN2
PCIE1 link=1
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0001:00:00.0: [14e4:8011] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
PCI: Fixing up bus 0
PCI: bus0: Fast back to back transfers disabled
pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000
pci 0001:01:00.0: reg 10: [mem 0x08000000-0x08007fff 64bit]
pci 0001:01:00.0: supports D1 D2
PCI: Fixing up bus 1
PCI: bus1: Fast back to back transfers disabled
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0x08000000-0x080fffff]
PCIE2 link=1
PCIE2 switching to GEN2
PCIE2 link=1
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0002:00:00.0: [14e4:8011] type 01 class 0x060400
pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
PCI: Fixing up bus 0
PCI: bus0: Fast back to back transfers disabled
pci 0002:02:00.0: [14e4:4331] type 00 class 0x028000
pci 0002:02:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit]
pci 0002:02:00.0: supports D1 D2
PCI: Fixing up bus 2
PCI: bus2: Fast back to back transfers disabled
pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 02
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 02
pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40003fff 64bit]
pci 0002:00:00.0: PCI bridge to [bus 02]
pci 0002:00:00.0: bridge window [mem 0x40000000-0x400fffff]
PCIE3 link=0
Error creating gpio class
squashfs: version 3.0 (2006/03/15) Phillip Lougher
msgmni has been set to 239
alg: No test for stdrng (krng)
io scheduler noop registered (default)
io scheduler cfq registered
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117) is a 16550
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
Boot partition size = 262144(0x40000)
Creating 3 MTD partitions on "bcmsflash":
0x000000000000-0x000000040000 : "boot"
0x0000000f0000-0x000000100000 : "nvram_cfe"
0x0000000e0000-0x0000000f0000 : "nvram"
Found a Esmt NAND flash:
Total size: 128MB
Block size: 128KB
Page Size: 2048B
OOB Size: 64B
Sector size: 512B
Spare size: 16B
ECC level: 8 (8-bit)
Device ID: 0x92 0xf1 0x80 0x95 0x40 0x7f
lookup_nflash_rootfs_offset: offset = 0x0, 0x20000
found TRX Header on nflash!
nflash: squash filesystem with lzma found at block 11
Creating 2 MTD partitions on "nflash":
0x000000000000-0x000002000000 : "linux"
0x000000160000-0x000002000000 : "rootfs"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
GACT probability NOT on
Mirror/redirect action on
Failed to load ipt action
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8057 buckets, 32228 max)
nf_conntrack_rtsp v0.6.21 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
found cfe nvram
Key type encrypted registered
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom
Inc. 2012
NAND device: Manufacturer ID: 0x92, Chip ID: 0xf1 (Eon NAND 128MiB 3,3V
8-bit), 128MiB, page size: 2048, OOB size: 64
Spare area=64 eccbytes 56, ecc bytes located at:
2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30
31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59
60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
(0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
(0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
Driver must set ecc.strength when using hardware ECC
Scanning device for bad blocks
Bad eraseblock 1023 at 0x000007fe0000
Options: NO_SUBPAGE_WRITE,
Creating 1 MTD partitions on "brcmnand":
0x000002000000-0x000008000000 : "ddwrt"
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Freeing unused kernel memory: 232K (c0350000 - c038a000)
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0
soft_margin=60 sec soft_panic=0 (nowayout=1)
et: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0x400
et0: online cpus 2
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.86
(r456083)
roboswitch: Probing device 'eth0'
roboswitch: trying a 53011! at eth0
roboswitch: found a 53011! at eth0
PCI: Enabling device 0002:02:00.0 (0140 -> 0142)
eth0: mixed HW and IP checksum settings.
4) root at DD-WRT:~# uname -a
Linux DD-WRT 3.10.34-rc1 #2005 SMP Mon Mar 24 07:49:09 CET 2014 armv7l
GNU/Linux
2014-07-10 16:45 GMT-03:00 Rafał Miłecki <zajec5 at gmail.com>:
> On 10 July 2014 21:30, Ronaldo Afonso <ronaldo at ronaldoafonso.com.br>
> wrote:
> > I have a Buffalo WZR-1750DHP and I would like some one to help me
> porting
> > OpenWRT to this hardware.
>
> It's not too kind to don't even post info about SoC. Well, it's BCM4708A0.
>
> What kind of help do you need? Specify.
>
--
Ronaldo Afonso
11 9 5252 0484
www.ronaldoafonso.com.br
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20140804/d277f2be/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list